您现在正在浏览:首页 > 论文 > 机械机电 > 硕士论文-光纤连接器端面研磨机的设计及运动仿真分析

免费下载硕士论文-光纤连接器端面研磨机的设计及运动仿真分析

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计
  • 适用年级:大学
  • 上传用户:ylrexarc
  • 文件格式:pdf
  • 文件大小:2.75MB
  • 上传时间:2011-4-20 23:38:02
  • 下载次数:1
  • 浏览次数:64

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
沈阳理工大学硕士论文-光纤连接器端面研磨机的设计及运动仿真分析,共93页
摘要
光纤连接器是用于实现系统中设备与设备、设备与仪表、设备与光纤、光纤
与光纤之间的非永久性固定连接,是光纤通信系统中各种装置连接必不可少的器
件,也是目前使用量最大的光纤器件,因此,光纤连接器加工受到工程界和学术
界广泛关注.随着对光纤连接器性能要求的不断提高和应用数量的不断增加,现
有的光纤连接器加工设备及加工技术越来越难以满足其发展要求。而我国对光纤
连接器端面加工中的关键设备光纤连接器端面研磨机的研发与国外存在很大差
距。所以研制具有自主知识产权的光纤连接器端面研磨机,对推动我国光纤连接
器端面加工及精密与超精密加工技术的发展具有重要意义。
本文详细阐述了光纤连接器的功能、应用、型号分类、技术指标标准及存在
问题等;分析了光纤连接器端面加工机理、相关加工技术及材料的去除模式对光
纤连接器表面的质量影响:在充分研究国内外各种光纤连接器端面研磨机的基础
上。研制了一台双驱动两自由度行星式光纤连接器端面研磨机,利用UG建立了此
研磨机整机三维模型,并完成了此研磨机气动系统和电控系统的设计;采用虚拟
样机技术,对双驱动两自由度行星式光纤连接器端面研磨机研磨运动轨迹进行了
仿真研究,分析了系秆转速与研磨盘自转转速比值、系秆长度、光纤连接器端面
中心点与内齿轮中心点的距离三个主要参数对研磨运动轨迹变化及研磨加工质量
的影响;确定了在得到理想研磨运动轨迹时.上述主要参数比较理想的参数组合,
并仿真得出了符合光纤连接器加工要求的研磨运动轨迹图形;通过研究研磨运动
轨迹及研磨速度对光纤连接器端面加工质量的影响,给出了本文设计的光纤连接
器端面研磨机不同研磨加工阶段的系杆转速与研磨盘自转转速比值;确定了本研
磨机能得到高质量光纤连接器端面加工条件下,系杆和内齿轮驱动电机的转速范
围;通过样机制造,为后续的光纤连接器端面加工实验及相关技术研究提供了实
验平台.
本课题对光纤连接器端面加工所涉及的相关技术和设备的研究,对提高光纤
连接器端面加工质量,改善光纤连接器性能具有实际意义。
关键词:行星式:研磨机;虚拟样机技术;运动轨迹;仿真
Abstract
Fiber connector,used for the non-permanent rigid connection in the fields of
equipment to equipment,equipment to instrument,equipment to fiber and fiber to fiber,
is the absolutely necessary device for the connection of different kind of apparatus in
the fiber communication system,which is widely used currently.Therefore,more and
more people pay attention to the equipment and the technique used in machining the
fibercoBnecIf.or.Alongwiththecontinuously improvingrequirementsoffiberconnector
peffommce and the increasing number of applications,existing equipment and
technology are more and more difficult to satisfy the requirements of fiber connector.
Howls,oct,there is a big gap between China and foreign countries in the research ofkey
equipments in end-face prot∞s$.So it is significant to manufacture a kind of fiber
connector end·face tapping machine with the proprietary intellectual property rights,
which will promote the development of fiber conneetor end-face machining and
precision/super-precision machining technology ofour country.
The function,application,type classification,technical index standards and other
problems of fiber connectof are introduced in detail.the effects of fiber enmle虻1.or
end-face processing mechanism,processing technology and material removal model on
mlrfat∞quality of fiber connector are analyzed;Witll respect to the fiber connector
end-face lapping machine.based on the survey of current status of aboar也a kind of
planetary fiber connector end·face lapping machine with double drive and two degrees
of freedom is developed,the integrated 3d-model of lapping machine is built诵th UG.
and the designs of pneumatic system and electronic control system黜accomplished;
The grinding traces ofplanetary fiber connector end-face lapping machine are simulated
using virtual prototype technology and ADAMS,the effects of three major parameters
including the ratio of revolving alto rotating velocity and self-rotating velocity,the
length of revolving arm,the distance between center poim of fiber enmllxfllor end-face
and inner gear on grinding Iraces change and grinding quality a坞扣mIy刁ed’when
achieving the ideal grinding tl'aees,the combination of the major parameters above is
determined,and the grinding traces which meet requirement of fiber connector end-face
processing arc achieved;According to the effect of[Finding traces and velocity offiber
connector end-face lapping machine which is developed in the paper,the velocity
ranges of motors which driving the revolving alTn and inner gear are determined;The
experimental platform for researching on the experiment of fiber connector end-face
processing and technology is provided by the model machine manufacturing.
The research oftechniques and machine for machining fiber connector end-face in this
paper is contributed to promote the quality of fiber connector end-face and the
performance offiber connector in practical processing.
Key words:planetary;lapping machine;virtual prototype technology;motion traces;
simulation
资料文件预览
共1文件夹,1个文件,文件总大小:2.84MB,压缩后大小:2.75MB
  • 硕士论文-光纤连接器端面研磨机的设计及运动仿真分析
    • Adobe Acrobat可导出文档格式文件硕士论文-光纤连接器端面研磨机的设计及运动仿真分析.pdf  [2.84MB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部