您现在正在浏览:首页 > 论文 > 机械机电 > 硕士论文-全自动研磨机的研究和设计

免费下载硕士论文-全自动研磨机的研究和设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计
  • 适用年级:大学
  • 上传用户:ylrexarc
  • 文件格式:pdf
  • 文件大小:1.89MB
  • 上传时间:2011-4-20 23:38:01
  • 下载次数:2
  • 浏览次数:72

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
厦门大学硕士论文-全自动研磨机的研究和设计,共81页
摘要
目前国内生产中大多采用劳动密集型的人工研磨,人工研磨的力度大小不均
匀,影响研磨质量,所生产的产品质量受人为因素很大,稳定性差。漳州灿坤有
限公司雇佣了大量的工人进行研磨操作,产品质量无法保证。“945全自动研磨
机”可以实现机械代替人工,使产品的质量稳定性得到保证,提高劳动生产率和
产品的科技含量。因而,设计研制“945全自动研磨机’’具有十分重要的意义,
同时该研制方法可以应用到其它需研磨的生产线。
本文主要对“945全自动研磨机”的机械总体设计,气动控制系统,PLC控
制系统及其在生产中的应用,全文共分五章:
第一章绪论,首先说明课题的意义、解决方案、介绍可编程逻辑控制器
(PLC)的组成、工作原理、发展的趋势和动向,机器入的定义、在生产中的应用
及发展前景,气动系统。
第二章“945全自动研磨机”的机械总体设计。对机械整体的布局及各工
位之间的衔接进行合理的设计,通过以铣端口为例进行分析和计算及以工件机械
手为例进行运动学和动力学分析。
第三章分析“945全自动研磨机”的气动控制系统,并设计气动控制系统
的气动回路。
第四章分析“945全自动研磨机”的PLC控制系统。根据技术参数要求,
可选择MITSUBISHI-FX2n-64MR可编程控制器,设计了系统的硬件,编写了控制
系统的软件。
第五章结论。对整个系统作总结。
关键词:自动研磨机;PLC;控制系统
Abstract
Abstract
The labour denseness model was adopted in the most of relay production lines
presently,which makes asymmetry and grinding degree and affects the grinding
quality by human being.So the artificial factor of the product is serious and instability.
A large number of workers arc employed to grind in TSANN KUEN Co.,LTD of
Zhangzhou which is unable to guarantee the quality ofproduct.The full automation of
muller is instead of human labour,which not only assures the quality and the stability,
but also improves productivity and the technological content in product.So it is very
important to study the full automation muller machine,the most important is that the
technique can be applied to other similar grinding production.
This thesis is mainly studied:the machine structure,the pneumatic control
system,the PLC(Programmable Logical Controller)control system of the automation
muller machine.The thesis is divided into five chapters.
The significance and solution of the task,the compose of PLC,PLC working
theory and the developing trend are analysed in first chapter.The robot defined and
applied in the manufacture,the pneumatic control system are introduced。
The structure of the automation muller machine was analyzed in chapter two.
According to the manufacturing process and the velocity and acceleration of each part
are described,in the same time,the force ofthe mechanism is studied.The kinematics
and kinetics are analysed by manipulator handbook.
In term of the manufacturing process requirements,the pneumatic principle chart,
the construction and the working principle ofthe system are designed.
The PLC control system is studied in chapter four.In term of specific control
demand,the wiring chart of the hardware is designed,and the flow chart of the
software is drawn,then the software is also compi led.
Chapter five:the conclusions.
Keywords:the automation muller machine;PLC;the control system.
资料文件预览
共1文件夹,1个文件,文件总大小:1.95MB,压缩后大小:1.89MB
  • 硕士论文-全自动研磨机的研究和设计
    • Adobe Acrobat可导出文档格式文件硕士论文-全自动研磨机的研究和设计.pdf  [1.95MB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部