您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计-CA6140车床法兰盘的工艺规程和夹具设计

免费下载毕业设计-CA6140车床法兰盘的工艺规程和夹具设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计制造及自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+autocad+CATIA+ppt+pdf
  • 文件大小:4.84MB
  • 上传时间:2014-6-26 1:55:37
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-CA6140车床法兰盘的工艺规程和夹具设计,共42页,11772字,附设计图纸、三维图纸、外文翻译、答辩PPT、工序卡
摘 要
本次毕业设计的题目是CA6140车床法兰盘的工艺规程和夹具设计,主要内容如下:
首先,对零件进行分析,主要是零件作用的分析和工艺性分析,通过零件分析可以了解零件的基本情况,而工艺分析可以知道零件的加工表面和加工要求。根据零件图提出的加工要求,确定毛坯的制造形式和尺寸。
其次,进行基面的选择,确定加工过程中的粗基准和精基准。根据选好的基准,制订工艺路线,通常制订两种以上的工艺路线,通过工艺方案的比较与分析,再选择可以使零件的几何形状、尺寸精度及位置精度等技术要求得到合理的保证的一种较佳工序路线。
然后,根据已经选定的工序路线,确定每一步的切削用量及基本工时,并选择合适的机床和刀具和量具。
最后,设计钻法兰盘4-?9孔的钻床夹具。设计钻床夹具,首先要仔细分析被加工零件的技术要求,运用夹具设计的基本原理和方法,拟定夹具设计方案;在满足加工精度的条件下,合理的进行安装、定位、夹紧;在完成夹具草图后,进一步考虑零件间的连接关系和螺钉、螺母、定位销等的固定方式,设计合理的结构实现各零部件间的相对运动;根据各零件的使用要求,选择相应的材料。
完成钻床夹具的所有设计后,用AutoCAD进行二维图形的绘制,首先画装配图,然后从装配图上拆画零件图,标注相关尺寸及技术要求;再用CATIA画出三维模型图,最后进行论文的撰写、整理、修改完成该毕业设计。
关键词: 机械,法兰盘,加工工艺,夹具设计

ABSTRACT
The subject of this graduation project is that CA6140 lathe ring flange processing technology rules and special-purpose jig of a certain process are designed, the main content is as follows:
First of all, analyse , it is mainly analysis of the function of the part and craft analysis to the part , through part analyse can find out about basic situation of part, and craft analyse may know the processing surface of the part and is it require to process. The processing demand put forward according to the part picture, confirm the manufacture form. of the blank and sureness of the size.
The second step, carry on the choice the base , confirm thick datum and precise datum in the processing course. According to the datum chosen , make the craft route , usually make the craft route of more than two kinds, with analysing through the comparison of the craft scheme, and then choosing be able to make such specification requirements as the precision of geometry form. size of the part and precision of position ,etc. get a kind of process of the rational assurance s.
The third step, according to the already selected process route, confirm for every steps of cutting consumption and basic man-hour , choose suitable lathe and cutter. To rough machining , will check the power of the lathe .
Finally , design the jig getting into the hole of the ring flange. Designed drilling fixture, the first careful analysis is the technical requirements for processing components, fixture design using the basic principles and methods.Prepared the fixture design scheme ;Meet the conditions of precision ,then reasonable installation, positioning, clamping;After the completion of draft fixture, and further consider the connection relation between parts and screws, nuts, pins and other fixed means,designing the reasonable structure to achieve relative motion between the various components;Requirements of the various components, select the appropriate materials.
Completion of all drilling fixture design, using the AutoCAD drawing two-dimensional graphics,first draw assembly drawing, and then removed from the part drawing on the painting Parts,marking the related to size and technical requirements,finally, write a thesis, organize, edit, complete the graduation project.
KEY WORDS: machine, flange, process the craft, the tongs design

目 录
第1章 绪 论 7
第2章 零件的结构工艺性分析 8
2.1 零件的作用 8
2.2 零件的工艺性分析 8
第3章 工艺规程设计 10
3.1 确定毛坯的制造形式 10
3.2 基准的选择 10
3.2.1粗基准的选择 10
3.2.2精基准的选择 11
3.3 工艺路线的拟定 11
3.3.1 选择加工方法 11
3.3.2 划分加工阶段 12
3.3.3 安排加工顺序 12
3.4 机械加工余量、工序尺寸及毛坯尺寸的确定 14
3.5 确定切削用量及基本工时 18
第4章 夹具设计与分析 24
4.1 问题的提出 24
4.2 夹具设计 24
4.2.1 夹具结构和类型的选取 24
4.2.2 夹具定位元件的选择 26
4.2.3 钻套的设计 27
4.2.4 钻模板设计 28
4.2.5 夹具体(底座)的设计 29
4.2.6 其他装置 30
4.2.7 夹紧装置的设计计算 31
4.2.8 切削力计算 33
4.2.9 机床夹具精度校核 34
4.2.10 绘制夹具总图 37
4.2.11 拆分夹具零件图 37
第5章 全文总结 39
参考文献 40
致 谢 41
毕业设计小结 42

资料文件预览
共10文件夹,71个文件,文件总大小:33.85MB,压缩后大小:4.84MB
  • 毕业设计-CA6140车床法兰盘的工艺规程和夹具设计
    • 毕业设计(李建飞)CA6140车床法兰盘工艺规程及夹具设计
      • 外文翻译
        • Adobe Acrobat可导出文档格式文件NC Technology.pdf  [116.48KB]
        • 配置文件NC Technology.pdf.baiduyun.uploading.cfg  [2.28KB]
        • Microsoft Word文档数控技术.doc  [24.00KB]
        • 配置文件数控技术.doc.baiduyun.uploading.cfg  [2.27KB]
        • Microsoft Word文档翻译封面.doc  [374.50KB]
      • 钻床夹具
        • CAD二维图
          • AutoCAD工程图纸文件定位心轴(A4).dwg  [344.46KB]
          • AutoCAD工程图纸文件底座(A4).dwg  [324.03KB]
          • AutoCAD工程图纸文件特种钻套(A4).dwg  [331.03KB]
          • AutoCAD工程图纸文件连接板(A4).dwg  [344.87KB]
          • AutoCAD工程图纸文件钻模夹具装配总图(A2).dwg  [674.19KB]
          • AutoCAD工程图纸文件钻模板(A3).dwg  [398.12KB]
        • CATIA 三维模型图
          • catpartdingweixiao.CATPart  [66.71KB]
          • catpartdizuo.CATPart  [200.01KB]
          • catpartKAIKOUDIANPIAN.CATPart  [93.62KB]
          • catpartlianjieban.CATPart  [118.95KB]
          • catpartlingjiantu.CATPart  [247.49KB]
          • catpartluoding.CATPart  [122.06KB]
          • catpartluoding2.CATPart  [121.07KB]
          • catproductProduct2.CATProduct  [110.62KB]
          • catpartshaft.CATPart  [116.61KB]
          • catpartshangmian luomu M8.CATPart  [148.16KB]
          • catparttezhongzuantao.CATPart  [122.73KB]
          • catpartxiamian luomu M8.CATPart  [133.95KB]
          • catpartyouce luomu.CATPart  [133.76KB]
          • catpartzuanmoban.CATPart  [247.88KB]
          • Windows或OS/2位图文件夹具装配图(主视).bmp  [1.19MB]
          • Windows或OS/2位图文件夹具装配图(俯视).bmp  [1.41MB]
      • 附件(图)
        • 夹具原始方案
          • AutoCAD工程图纸文件夹具装配(方案2).dwg  [385.06KB]
          • AutoCAD工程图纸文件夹具装配(方案1).dwg  [381.77KB]
          • AutoCAD工程图纸文件用销钉联接模板的钻模.dwg  [393.22KB]
          • AutoCAD工程图纸文件铰链连接魔板的钻模.dwg  [397.35KB]
        • 工序草图
          • AutoCAD工程图纸文件10#工序 粗车+孔.dwg  [289.04KB]
          • Windows或OS/2位图文件15#工序 粗车.bmp  [1.74MB]
          • AutoCAD工程图纸文件15#工序 粗车.dwg  [287.52KB]
          • Windows或OS/2位图文件20#工序 半精车.bmp  [1.74MB]
          • AutoCAD工程图纸文件20#工序 半精车.dwg  [286.12KB]
          • Windows或OS/2位图文件25#工序 半精车.bmp  [2.34MB]
          • AutoCAD工程图纸文件25#工序 半精车.dwg  [283.26KB]
          • Windows或OS/2位图文件30#工序 精车.bmp  [2.34MB]
          • AutoCAD工程图纸文件30#工序 精车.dwg  [288.05KB]
          • Windows或OS/2位图文件35#工序 精车+倒角.bmp  [1.78MB]
          • AutoCAD工程图纸文件35#工序 精车+倒角.dwg  [285.10KB]
          • AutoCAD工程图纸文件40#工序 铣平面.dwg  [280.82KB]
          • AutoCAD工程图纸文件45#工序 钻4Xφ9孔.dwg  [304.43KB]
          • AutoCAD工程图纸文件5 #工序 毛坯图.dwg  [369.59KB]
          • AutoCAD工程图纸文件50#工序 钻φ4、φ6孔.dwg  [306.08KB]
          • AutoCAD工程图纸文件55#工序 磨B面.dwg  [283.92KB]
          • AutoCAD工程图纸文件65#工序 倒角.dwg  [325.13KB]
          • AutoCAD工程图纸文件70#工序 抛光.dwg  [315.05KB]
          • AutoCAD工程图纸文件75#工序 刻字划线.dwg  [325.15KB]
          • AutoCAD工程图纸文件80#工序 镀铬.dwg  [310.63KB]
        • 论文插图
          • AutoCAD工程图纸文件偏斜误差示意图.dwg  [303.48KB]
          • Windows或OS/2位图文件夹具装配图(主视).bmp  [1.19MB]
          • Windows或OS/2位图文件夹具装配图(俯视).bmp  [1.41MB]
          • AutoCAD工程图纸文件定位误差示意图.dwg  [306.83KB]
          • AutoCAD工程图纸文件带柄螺母.dwg  [286.36KB]
          • AutoCAD工程图纸文件心轴.dwg  [306.98KB]
          • AutoCAD工程图纸文件心轴固定.dwg  [288.20KB]
          • AutoCAD工程图纸文件快卸垫片结构.dwg  [297.75KB]
          • AutoCAD工程图纸文件排屑空间.dwg  [289.96KB]
          • AutoCAD工程图纸文件用扳手的六角螺母.dwg  [267.17KB]
          • AutoCAD工程图纸文件翼型螺母.dwg  [284.00KB]
          • AutoCAD工程图纸文件钻头示意图.dwg  [272.62KB]
          • AutoCAD工程图纸文件销定定位(方案1).dwg  [386.08KB]
        • catpartlingjiantu.CATPart  [247.15KB]
        • Windows或OS/2位图文件零件模型图.bmp  [815.68KB]
      • Microsoft Word文档CA6140车床法兰盘工艺规程及夹具设计说明书.doc  [1.72MB]
      • Microsoft Word文档工序卡片.doc  [443.24KB]
      • AutoCAD工程图纸文件毛坯图(A4).dwg  [362.22KB]
      • Microsoft Powerpoint演示文稿答辩PPT.ppt  [899.00KB]
      • AutoCAD工程图纸文件零件图(A3).dwg  [317.78KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部