安全检测:瑞星:安全 诺顿:安全 卡巴:安全
毕业设计-零件的三维建模及自动编程,共45页,15357字,附外文翻译、答辩PPT
摘 要
数控编程是一种可编程的柔性加工方法,它的普及大大提高了加工效率。但是在加工技术方面,除要求数控机床具有较强的运动控制能力之外,更重要的是如何有效地获得高效优质的数控加工程序,并从加工过程整体上提高生产效率。由于零件复杂性的增加,而且工人技术水平有限,自动编程越来越困难。
应用自动编程可大大提高生产率、稳定加工质量、缩短加工周期、增加生产柔性、实现对各种复杂精密零件的自动化加工。
本文以UG NX 8及VERICUT为工具,完成了的三维造型及仿真加工。内容包括:首先,根据零件的结构特点和技术要求,在对其进行加工工艺分析之后,确定了零件的加工方法。然后,利用UG/CAD模块完成了零件几何体的参数化建模。在此基础上,利用UG/CAM模块进行数控编程,设计了加工路线、刀具轨迹,切削方式等工艺参数,生成了零件的NC程序。通过刀轨检查与仿真加工及时地发现刀具跟零件之间的过切和欠切。
关键词:数控编程, UG,三维造型,仿真加工
ABSTRACT
CNC machining is a programmable flexible processing methods, its popularity greatly improve the processing efficiency. But in the processing technology, in addition to requirements of CNC machine tools has a strong ability to control movement and, more importantly, how to efficiently obtain high-quality CNC machining process, and from the process as a whole to improve production efficiency. As part of the increased complexity and limited skills of workers, Automatic programming applications can greatly improve productivity, stability, processing quality, shorten the processing cycle, increasing the production of flexible, to achieve a variety of complex precision components for the automation of processing.
In this paper, UG NX 8.0 as a tool,complete the adjust frame three-dimensional modeling and simulation process. Include: First, based on the adjusted frame structural features and technical requirements, in its process analysis, to determine the part of the processing methods. Then, using UG / CAD module to complete the part geometry parametric modeling. On this basis, the use of UG / CAM module for NC programming, design the machining line, the tool path, cutting mode and other parameters, to generate a part of the NC program. By checking in a timely manner toolpath tool found between the parts with undercuts and under cut.
KEYWORDS: CNC technology, UG, three-dimensional modeling, simulation, processing,
目 录
第一章 绪 论 1
1.1 课题研究的背景及意义 1
1.2 计算机辅助设计工艺过程设计辅助制造 2
1.2.1计算机辅助设计 2
1.2.2计算机辅助工艺过程设计 2
1.2.3计算机辅助制造 2
第二章 零件工艺分析 3
2.1零件的加工特点分析 3
2.2凹模的结构和尺寸精度及表面质量分析 3
2.3零件的材料分析 3
第三章 零件实体特征建模 5
3.1 建模软件UG的介绍 5
3.2分析零件 6
3.3 零件的实体三维造型 7
3.4 实体建模 7
3.5本章小结 14
第四章 零件的数控仿真加工 15
4.1数控仿真过程 15
4.2 零件加工的各参数分析确定 16
4.3零件的工艺规划 16
4.3.1工件的加工先后顺序 18
4.3.2设置加工环境 18
4.4 创建面的加工工序 19
4.4.1 定义新的加工坐标系、安全平面和工件 19
4.4.2 创建刀具 21
4.4.3设定加工方法 22
4.4.4粗加工 23
4.4.5半精加工 26
4.4.6精加工 28
4.4.7小结 31
第五章 后处理及代码输出 32
5.1 后处理工序 32
5.2生成程序 33
第六章 总结与展望 35
参考文献 36
致 谢 37
毕业设计小结 38