您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计-圆形盒盖的注塑模具设计

免费下载毕业设计-圆形盒盖的注塑模具设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:模具设计
  • 适用年级:大学
  • 上传用户:kaijung
  • 文件格式:word+autocad
  • 文件大小:1.01MB
  • 上传时间:2013-4-8 23:58:07
  • 下载次数:6
  • 浏览次数:103

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-圆形盒盖的注塑模具设计,共33页,14865字,附设计图纸
摘 要
塑料工业是当今世界上增长最快的工业门类之一,而注塑模具是其中发展较快的种类,因此,研究注塑模具对了解塑料产品的生产过程和提高产品质量有很大意义。本文讨论了应用Pro/E微机辅助设计圆盒盖注塑模具的设计方法。介绍了注射成型的基本原理特别是单分型面注射模具的结构与工作原理,对注塑产品提出了基本的设计原则;制品采用材料为低密度ABS。注射成型是热塑性塑料成型的主要方法之一,可以一次成型形状复杂的精密塑件。本设计进行了圆盒盖的注塑模设计,对零件结构进行了工艺分析。确定了分型面、浇注系统等,选择了注射机,计算了成型零部件的尺寸。采用侧浇口。利用直导柱导向,推杆顶料,顶板完成脱模。如此设计出的结构可确保模具工作运用可靠。最后对模具结构与注射机的匹配进行了校核。并用AUTOCAD和Pro/E绘制了一套模具装配图和零件图。最后介绍了当今世界上最为普及的三维CAD/CAM系统标准软件PRO/ENGNEER的PROGRAM模块,对导柱和导套进行了参数化设计。通过本设计,可以对注塑模具有一个初步的认识,注意到设计中的某些细节问题,了解模具结构及工作原理;通过对PROGRAM的学习,可以建立较简单零件的零件库,从而有效的提高工作效率。 关键词:热塑性塑料;注塑模;工艺分析;分型面;浇注系统;注射机;成型零部件。

ABSTRACT
Plastic industry is in the world grows now one of quickest industry classes, but casts the mold is development quick type, therefore, the research casts the mold to understand the plastic product the production process and improves the product quality to have the very big significance.
This paper discusses the designing of the mould for producing the plastic case of can cover with Pro/E; This design introduced the injection takes shape the basic principle, specially single is divided the profile to inject the mold the structure and the principle of work, to cast the product to propose the basic principle of design; Material is the ABS. Liquid plastic molding injection molding is one of the main ways to shape a shaped complex precision mold pieces. The design of the can cover cast mould design, structural parts for the craft analysis. Identified sub-type face, such as the old system, chose injection machine, the size of a shape parts. Use side runner. Using straight-pillar orientation, push rod top expected, leading to complete drawing of patterns and winning ways of pumping core materials and components for the choice. This structure ensures that instrument design work using reliable. Injection molding machine to the final structure and the degree of machine . And use AUTOCAD , Pro/E mapping components assembly, and parts of a map. Finally introduced now in the world the most popular three dimensional CAD/CAM system standard software PRO/ENGNEER PROGRAM module, and led the wrap to the guide pillar to carry on the parameterizations design .Through this design, may to cast the mold to have a preliminary understanding, notes in the design certain detail question, understands the mold structure and the principle of work; Through to the PROGRAM study, may establish the simple components the components storehouse, thus effective enhancement working efficiency.
KEY WORDS : Thermo plastics ; Plastic Injection Mould ;process analysis ;Parting Surface ; Gating system;Injection Molding Machine ;Molding parts .

目 录
摘 要 I
ABSTRACT II
1前言 1
1.1 模具工业在国民经济中的地位 1
1.2注塑模具的国内外的发展概况 1
1.2.1注塑模具的国外发展概况 1
1.2.2注塑模具的国内发展概况 2
1.3基于Pro/E 的小型塑性模具设计方法及流程 2
1.3.1圆盒盖模具设计环境与工具 2
1.3.2 传统模具设计方法 3
1.3.3 本毕业设计的模具设计方法 3
1.3.4塑件及塑件材料的特点 3
1.3.5成型方法 4
2.圆盒盖制件的设计 5
2.1圆盒盖的三维图 5
2.2圆形盒盖的“塑料顾问”分析 5
3.注射机的选择 6
3.1 注塑机基本参数 6
3.2选择注塑机 6
3.2.1由公称注射量选定注射机 6
3.4 注射机的校核 7
3.4.1 注射压力的校核 7
3.4.2 锁模力的校核 7
3.4.3 塑化能力的校核 8
3.4.3 开模行程与推出机构的校核 8
3.4.4安装部分相关尺寸的校核 8
3.4.5 模具外形尺寸校核 8
3.4.6 模具厚度校核 9
3.4.7 模具安装尺寸校核 9
3.4.8 开模行程校核 9
4 圆形盒盖的注塑模具设计 10
4.1方案的选择 10
4.2型腔数目的确定与排列形式 10
4.3浇注系统的设计 10
4.3.1主流道的设计 10
4.3.2分流道的设计 11
4.3.3浇口的设计 12
4.3.4剪切速率的校核 13
4.4 冷料穴的设计 14
5 成型零件的设计 15
5.1凹模工作尺寸的计算 15
5.2 凸模工作尺寸的计算 16
5.3中心距尺寸的计算 18
5 .4 前模仁的设计 18
5.4.1型腔壁厚和底版厚度计算 18
5.4.2成型零件的设计 19
5 .5导向与定位机构 20
5.6脱模机构的设计 21
5.7脱模力计算 22
5.8排气设计原则 22
6.模架选用 24
7.模具的动作过程 26
参考文献 27
致谢词 28

资料文件预览
共2文件夹,13个文件,文件总大小:2.21MB,压缩后大小:1.01MB
  • 毕业设计-圆形盒盖的注塑模具设计
    • 新建文件夹
      • AutoLISP、CommonLISP和其他LISP语言文件acad.lsp  [95.84KB]
      • AutoCAD工程图纸文件凹模.dwg  [69.87KB]
      • 备份文件凹模固定板.bak  [71.01KB]
      • AutoCAD工程图纸文件凹模固定板.dwg  [64.22KB]
      • 备份文件衬套.bak  [59.13KB]
      • AutoCAD工程图纸文件衬套.dwg  [68.84KB]
      • 备份文件定模座板.bak  [112.38KB]
      • AutoCAD工程图纸文件定模座板.dwg  [61.50KB]
      • 备份文件凸模.bak  [68.95KB]
      • AutoCAD工程图纸文件凸模.dwg  [68.97KB]
      • Microsoft Word文档圆盒盖注塑模设计说明书.doc  [1.22MB]
      • 备份文件装配图.bak  [139.82KB]
      • AutoCAD工程图纸文件装配图.dwg  [136.16KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部