您现在正在浏览:首页 > 论文 > 电子电工 > 毕业设计-反导拦截弹技术研究

免费下载毕业设计-反导拦截弹技术研究

  • 资源类别:论文
  • 资源分类:电子电工
  • 适用专业:自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+ppt
  • 文件大小:2.44MB
  • 上传时间:2014-7-30 1:35:29
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-反导拦截弹技术研究,共66页,27844字,附外文翻译、答辩PPT
摘 要
在现代战争中,空中威胁日益增强,战术弹道导弹(Tactical Ballistic Missile,TBM)以其射程远、速度快和机动能力强等优点,已成为现代战场上重要武器之一。世界军事强国以及我国周边一些国家,都纷纷加快了TBM技术的发展,这给我国周边的国土安全构成了严重威胁。因此,必须加快我国防空武器的技术发展,提高我国防空武器的空间防御能力。本文以TBM拦截为背景,针对拦截弹末制导问题进行了研究,主要内容包括以下几个方面:
(1)建立了拦截弹数学模型。定义了研究拦截弹建模中常用的坐标系,并给出了相应坐标系之间的坐标转换关系;在此基础上给出了拦截弹数学模型,包括拦截弹质心运动学模型和动力学模型、自动驾驶仪的等效模型以及目标不同机动运动模型;最后推导了拦截弹与目标的相对运动模型,为制导系统分析设计奠定了基础;
(2)研究了拦截弹的末制导方法。分析了经典比例导引律的过载特性和弹道特性,并给出了有利于进行全向攻击的广义比例导引律;基于拦截弹与目标的相对运动学模型,采用变结构控制理论和最优理论推导了适合拦截高速、大机动目标的滑模变结构制导律,并证明了该制导律对系统参数摄动和外界干扰的鲁棒性;最后针对不同的目标机动弹道,采用滑模变结构制导律和比例导引律进行了弹道仿真,对比分析了二者的性能,验证了滑模变结构制导律的优越性。
(3)研究了被动跟踪条件下的制导信息滤波方法。基于自适应滤波和强跟踪滤波方法,研究了在拦截末段只有角度测量信息情况下的被动跟踪问题,推导了适合拦截末段的自适应卡尔曼滤波方法,并仿真分析了其有效性。
关键词 TBM,拦截弹,模型变结构控制,自适应滤波

Abstract
In modern warfare, with growing aerial threat, tactical ballistic missiles (Tactical Ballistic Missile, TBM) have become an important weapon in one of the modern battlefield because of its long range, speed and maneuvering ability, etc. World military power as well as some of our neighboring countries, all have accelerated the TBM technology development, which to our homeland security surrounding a serious threat. Therefore, we must accelerate the technological development of our anti-aircraft weapons, anti-aircraft weapons in space to improve our defense capabilities. In this paper, TBM intercept as the background for the interceptor missile homing problem studied, the main contents include the following aspects:
(1) Establish a mathematical model of interceptor missile. Defines commonly used in modeling studies interceptor missile coordinate system, and the corresponding coordinates relations between the coordinate transformation; based on this mathematical model is given interceptors, including the interceptors centroid kinematics model and dynamic model , autopilot equivalent model and target different motorized sports model; finally deduced interceptor missile and target relative motion model for the analysis and design of the guidance system laid the foundation;
(2) Study the interceptor missile terminal guidance. Analysis of the classical proportional navigation overload characteristics and ballistic characteristics, and gives conducive to omnidirectional attack Generalized Proportional Navigation; based interceptor missile and target relative kinematics model, using variable structure control theory and optimal theoretical derivation of suitable blocking high-speed, large maneuvering target SMVSC guidance law, and proved that the guidance law system parameter perturbation and external interference robustness; final trajectory for different target maneuver using sliding mode variable structure proportional navigation guidance law and carried out trajectory simulation, comparative analysis of the performance of both validated sliding Mode Variable Structure Guidance Law superiority.
(3) Under the conditions of passive tracking, study guidance information filtering method. Based on adaptive filtering and strong tracking filter method to study the interception late in the angle measurement information only in case of passive tracking problem, derive suitable interception late adaptive Kalman filtering method and simulation analysis of its effectiveness.
Keywords:TBM, interceptor, the model variable structure control, adaptive filtering

目 录
摘 要 I
Abstract II
目 录 I
第1章 绪 论 1
1.1 研究背景及意义 1
1.2 国内外研究现状 2
1.2.1 反导系统发展状况 2
1.2.2 导引规律及滤波技术研究现状 5
1.3 本文主要的研究工作 7
第2章 拦截弹数学模型 9
2.1 引言 9
2.2 坐标系及其转换 9
2.2.1 坐标系定义 9
2.2.2 坐标转换关系 10
2.3 拦截弹数学模型建立 11
2.3.1 作用在拦截弹上的力 11
2.3.2 拦截弹质心运动的动力学方程 13
2.3.3 拦截弹质心运动的运动学方程 14
2.3.4 辅助计算方程 14
2.4 自动驾驶仪等效模型(交代模型具体数值) 15
2.5 目标运动及闪烁特性数学模型建立 15
2.5.1 目标运动特性数学模型 15
2.5.2 目标闪烁特性数学模型 20
2.6 拦截弹与目标相对运动模型 20
2.7 本章小结 22
第3章 拦截弹末段制导方法研究 23
3.1 引言 23
3.2 比例导引律 23
3.2.1 需用过载特性分析 24
3.2.2 弹道特性 26
3.3 基于滑模变结构的末端拦截导引律设计 27
3.3.1 变结构控制理论 27
3.3.2 滑模变结构制导律设计 32
3.3.3 滑模变结构制导律的鲁棒性 35
3.4 仿真分析 36
3.4.1 仿真初始条件 36
3.4.2 仿真结果及分析 37
3.5 本章小结 42
第4章 制导信息滤波方法研究 44
4.1 引言 44
4.2 滤波方法概述 44
4.2.1 卡尔曼滤波 44
4.2.2 Unscented卡尔曼滤波 45
4.2.3 粒子滤波 46
4.3 自适应卡尔曼滤波 46
4.3.1 Sage-Husa自适应卡尔曼滤波算法 47
4.3.2 滤波模型 49
4.3.3 仿真分析 51
4.4 本章小结 54
参考文献 55
致谢 57
毕业设计小结 57

1.3本文主要的研究工作
本文以大气层内反导拦截弹为研究背景,针对末制导设计以及相关方面的问题进行了研究,文章的主要内容安排如下:
第二章 建立拦截弹运动数学模型。介绍了常用的坐标系以及各坐标系之间的相互关系;分析了导弹在飞行过程中所受到的力和力矩,并在此基础上建立了拦截弹的动力学和运动学方程,以及目标的质心运动方程。本章是进行制导系统设计和仿真的基础。
第三章 进行拦截弹末制导律设计。介绍了滑模变结构控制理论的基本原理和设计方法,并以相对运动模型为基础,依据最优控制和滑模变结构控制理论详细推导了适用于末段拦截的滑模变结构制导律;分析滑模变结构制导律的鲁棒性,并针对目标不同机动情况,进行了滑模变结构制导律与比例导引律的仿真计算和结果分析。
第四章 制导信息滤波方法研究。介绍了常用的滤波方法;对于现代多数防空导弹武器系统来说,探测系统只能够提供方位信息,为了实现一些较为复杂的制导律需要知道弹目相对距离、相对速度等信息,而且滤波测量信息中还含有测量噪声。因此,本章应用自适应滤波和强跟踪滤波理论方法进行了仅有角度测量的目标跟踪问题研究。

资料文件预览
共2文件夹,4个文件,文件总大小:4.17MB,压缩后大小:2.44MB
  • 毕业设计-反导拦截弹技术研究
    • 赵睿
      • Adobe Acrobat可导出文档格式文件The application of Sliding Mode Control on Terminal Guidance of Interceptors.pdf  [372.38KB]
      • Microsoft Word文档毕设.doc  [2.44MB]
      • Microsoft Powerpoint演示文稿毕设.ppt  [842.00KB]
      • Office 2007以上版本的Microsoft Word文档滑模控制对拦截器末制导的应用.docx  [551.90KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
论文相关下载
返回顶部