您现在正在浏览:首页 > 论文 > 建筑化工 > 毕业论文-沉积法制备泡沫金属

免费下载毕业论文-沉积法制备泡沫金属

  • 资源类别:论文
  • 资源分类:建筑化工
  • 适用专业:化工
  • 适用年级:大学
  • 上传用户:xuehi
  • 文件格式:word
  • 文件大小:121.25KB
  • 上传时间:2009-5-18 16:11:35
  • 下载次数:0
  • 浏览次数:36

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
毕业论文 沉积法制备泡沫金属 共27页,12097字
摘 要
蜂窝状的金属也就是泡沫金属,由于其硬度高、比重低,以及一些其他性质,这种材料被广泛应用于轻型建筑、包装、以及保温、减震和化学过滤等方面。并且泡沫金属相对于泡沫塑料具有优良的物理性质和力学性质以及高循环的利用率,所以泡沫金属也逐渐成为一种新的工程材料。
目前金属沉积法制备泡沫金属是国内外制备泡沫金属较为流行的方法,电沉积法是其中的方法之一,但是也只限定在铝、镍等金属范围内。本人在综合了大量文献资料的基础上选择了以Cu为研究对象,对该方法制备泡沫金属的第二步—电镀做了重点研究。
本文用单因素分析法对一些影响镀速及镀层质量的因素进行了考察。主要因素有:电流密度、温度、主盐浓度、镀液pH值和添加剂。通过实验发现电流密度、温度、主盐浓度、镀液pH值对镀速有较大的影响,而添加剂和电流密度则对镀层质量有较大的影响。通过正交试验初步确定了较大镀速时的较佳工艺条件。
关键词: 泡沫金属 金属电沉积 镀速 镀层质量
BSTRACT
Metallic cellular materials, namely foams metal ,are found in everyday uses for their high stiffness, low specific weight and other properties. Applications range from light-weight construction and packaging, to thermal insulation, vibration damping, and chemical filtration.These foams enlarge the application range of cellular materials because of their excellent physical and mechanical properties, as well as their relative amenability to recycling compared to polymeric foams.
Currently,the metallic deposition method is a more popular method to prepare the foam metals at home and abroad .The electrical deposition method is one of them,but is only limitd in the metal scopes such as aluminum and nickel.After reviewing a great many literatures,this paper chose copper as our research object and primarily investigated the second step — metal-electroplation using the above method.
This paper probes into some facters which have influence on the eelectroplating speed and the quality of the plate,using the method of single factor analysis.These factors include the density electric current,temperature,main salinity,the pH value of the electroplating liquid and the additive .Through experiment,author find that the former four tactors have effect on the electroplating speed,while the density of electric current and the additive make great influence on the quality of the plate.Author identifies the prime craft condition via right-crossing experiment.
Key words: Foams metal The metals electricity deposite
Electroplate speed Plate layer quality
目录
1 文献综述 1
1.1 泡沫金属 1
1.1.1 研究背景 1
1.1.2 研究现状 1
1.1.3发展前景 3
1.2 金属电沉积 3
1.2.1 电镀的相关原理 3
1.2.2 极化现象 4
2 实验部分 5
2.1 实验用品 5
2.1.1实验药品 5
2.1.2实验仪器 5
2.2实验原理 6
2.3实验方法 6
2.4结果与讨论 8
2.4.1 温度对镀速和镀层质量的影响 8
2.4.2 电流对镀速和镀层质量的影响 10
2.4.3 pH值对镀速和镀层质量的影响 12
2.4.4 主盐浓度对镀速和镀层质量的影响 14
2.4.5 添加剂对镀速和镀层质量的影响 15
2.4.6 正交试验法确定较佳工艺条件 17
3 结论........... 20
参考文献..............................................................................................................................21致谢.......................................................................................................................................22
资料文件预览
共1文件夹,1个文件,文件总大小:218.00KB,压缩后大小:121.25KB
  • 毕业论文-沉积法制备泡沫金属
    • Microsoft Word文档毕业论文定稿-徐云.doc  [218.00KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部