您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计-连杆工艺设计及有限元分析

免费下载毕业设计-连杆工艺设计及有限元分析

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计制造及其自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+autocad+pro/e+ppt
  • 文件大小:1.54MB
  • 上传时间:2014-7-1 2:21:43
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-连杆工艺设计及有限元分析,共53页,14809字,附设计图纸、三维图纸建模、程序、外文翻译、答辩PPT
摘要
连杆是发动机内部的重要零件,连杆的作用是将活塞的往复运动转变为曲轴的旋转运动,并把作用在活塞组上的燃气压力传给曲轴。连杆的作用是把活塞和 曲轴联接起来,使活塞的往复直线运动变为曲柄的回转运动,以输出动力,因此,连杆的加工精度将直接影响柴油机的性能,而工艺的选择又是直接影响精度的主要因素。连杆在工作中,除承受燃烧室燃气产生的压力外,还要承受纵向和横向的惯性力。因此,连杆在一个复杂的应力状态下工作。它既受交变的拉压应力、又受弯曲应力。
本次毕业设计针对汽车发动机连杆进行工艺设计编制及有限元分析。涉及连杆的选材、确定毛坯、拟定工艺路线、选择工艺设备。本论文通过CAD,PROE,ANSYS等对连杆进行了绘制与分析,并且对连杆的加工工艺进行了编制。得到了工艺过程和连杆的有限元分析。
关键字:连杆,工艺编制,有限元分析

ABSTRACT
Internal parts of the engine is an important link, the link is to effect reciprocation of the piston into rotary motion of the crankshaft, and the piston acting on the gas pressure to the crank set. Role of the piston rod and the crankshaft are coupled together, the reciprocating linear motion of the piston into rotary motion of the crank to the output power, therefore, the connecting rod will directly affect the precision of the performance of the diesel engine, and the process selection is direct The main factors that affect the accuracy. Link at work, in addition to withstand the pressure generated by combustion of gas, but also to withstand the longitudinal and transverse inertia force. Thus, the link to work in a complex stress state. Both by alternating tension and compression stresses, but also by bending stresses.
The graduation project preparation process design and finite element analysis for automotive engine connecting rod. Selection involves connecting rod to determine the rough, develop process route, select process equipment. In this thesis, CAD, PROE, ANSYS, etc. on the link were drawn and analyzed, and the process for connecting rod were prepared. And by a process of finite element analysis of the connecting rod.
KEY WORDS: connecting rod,process planning ,finite element analysis

目 录
第一章 绪 论 - 5 -
1.1课题研究的意义 - 5 -
1.2国内外现状 - 5 -
1.3论文的章节安排 - 6 -
第二章 连杆的工艺编制 - 8 -
2.1 连杆的结构分析 - 8 -
2.1.1连杆的作用 - 8 -
2.1.3 连杆的工艺分析 - 8 -
2.1.4 连杆的材料和毛坯选择 - 10 -
2.2 连杆机械加工工艺过程 - 11 -
2.3连杆工艺过程的安排 - 12 -
2.3.1两个影响加工精度的主要因素 - 12 -
2.3.2确定合理的夹紧方法 - 13 -
2.3.3定位基准的选择 - 13 -
2.3.4 连杆大小头孔的加工 - 15 -
2.3.5连杆螺栓孔的加工 - 15 -
2.4连杆加工工艺应考虑的问题 - 16 -
2.4.1工序安排 - 16 -
2.4.2定位基准 - 16 -
2.4.3夹具使用 - 16 -
2.4.4粗精加工时切削用量的选择原则 - 17 -
2.5 连杆机械加工工艺路线 - 18 -
2.6 各工序的加工余量 - 27 -
第三章 连接受载荷情况下的有限元分析 - 29 -
3.1连杆的有限元分析过程和结果 - 29 -
第四章 全文总结 - 45 -
致 谢 - 46 -
参考文献 - 47 -
毕业设计小结 - 48 -

资料文件预览
共2文件夹,16个文件,文件总大小:7.88MB,压缩后大小:1.54MB
  • 毕业设计-连杆工艺设计及有限元分析
      • lgw0123.lgw  [5.69KB]
      • Windows或OS/2位图文件file01.bmp  [959.12KB]
      • Windows或OS/2位图文件file02.bmp  [964.93KB]
      • Windows或OS/2位图文件file03.bmp  [980.53KB]
      • Windows或OS/2位图文件file04.bmp  [976.60KB]
      • Windows或OS/2位图文件file05.bmp  [980.49KB]
      • Windows或OS/2位图文件file06.bmp  [984.44KB]
      • 3prt0003.prt.3  [138.56KB]
      • 备份文件Standard G.bak  [75.99KB]
      • AutoCAD工程图纸文件Standard G.dwg  [87.45KB]
      • AutoCAD工程图纸文件Standard T.dwg  [79.19KB]
      • AutoCAD工程图纸文件Standard ZT.dwg  [56.97KB]
      • Windows临时文件~WRL2554.tmp  [607.71KB]
      • Microsoft Word文档外文翻译.doc  [101.50KB]
      • Microsoft Word文档梁乐 .11.doc  [569.71KB]
      • Microsoft Word文档论文.doc  [496.92KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部