您现在正在浏览:首页 > 论文 > 电子电工 > 毕业设计-多工位行车的自动控制的设计

免费下载毕业设计-多工位行车的自动控制的设计

  • 资源类别:论文
  • 资源分类:电子电工
  • 适用专业:电气工程及其自动化
  • 适用年级:大学
  • 上传用户:haobi
  • 文件格式:word
  • 文件大小:278.41KB
  • 上传时间:2011-6-13 1:51:24
  • 下载次数:3
  • 浏览次数:132

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
毕业设计-多工位行车的自动控制的设计,共39页,12467字
摘 要
本设计介绍了利用可编程控制器和交流变频调速器对多工位行车控制的设计,并给出了电路图和流程图。
实现了小车的可控制左右运行及小型吊车可上下垂直运动,设计报告对PLC的特点、工作原理和发展趋势作了简要阐述;随着微电子技术和计算机技术的迅速发展,PLC在工业控制领域内得到十分广泛的应用。PLC是一种基于数字计算机技术、专为在工业环境下应用而设计的电子控制装置,它采用可编程储存器,用来储存用户指令,通过数字或模拟的输入/输出,完成一系列逻辑、顺序、定时、计数、运算等确定的功能,来控制各种类型的机电一体化设备和生产过程。对三菱FX2N-48系统的部分重要指令做了扼要介绍。根据多工位行车控制要求,通过工作过程分解,画出控制系统工作流程图,给出了所需的设备,并根据顺序控制等方法进行程序设计。通过对程序的编译和模拟运行验证后,本设计符合控制要求。
另外,报告还对设计的多工位行车PLC控制系统的外围部件(如三相异步电动机、行程开关、继电器、变频调速器)的工作原理、使用参数与PLC的外部电气连接图, 做了分析研究。
关键词:多工位行车控制 三菱FX2N-48 调速控制
Abstract
This design introduces the use of programmable controllers and AC frequency converter for multi-site traffic control design, and gives the circuit diagram and flowchart. Can be controlled to achieve the car around and the small cable car can run up and down vertical movement, the design features of the report of the PLC, working principle and trends are briefly described; As the microelectronics and computer technology is developing rapidly, PLC within the field of industrial control in a wide range of applications. PLC is a digital computer-based technology, designed for applications in industrial environments designed electronic control device, which uses programmable memory for storing user instructions, through digital or analog input / output, completed a series of logic, Sequence, timing, counting, operations and other functions determined to control all types of electromechanical equipment and production processes.Mitsubishi FX2N-48 on the part of the system made a brief account of the important instructions. According to multi-site traffic control requirements, the process of decomposition through the work, draw the flow chart of the control system work, given the necessary equipment, and methods based on sequence control program design. Through the process of compiling and simulation run validation, designed to meet the control requirements. In addition, the report on the design of the multi-site traffic control system PLC peripheral components (such as three-phase asynchronous motor, limit switch, relay, frequency converter) works, using the parameters of the external electrical connection with the PLC plans to do the analysis.
Keywords:Multi-site traffic control Mitsubishi FX2N-48 Speed ??Control
目 录
摘 要 I
Abstract II
绪 论 1
1 PLC的简介 2
1.1 课题的意义及发展状况 2
1.2 PLC的定义 2
1.3 PLC的应用领域 2
1.4 PLC的特点 3
1.6 PLC发展趋势 5
1.7 PLC的组成 5
1.8 PLC的基本工作原理 6
1.9 PLC的主要指令 6
2 控制系统硬件介绍 8
2.1 电动机选择及参数说明 8
2.2 接近开关的介绍 9
2.3 交流变频器的选择和应用 12
2.4 三菱FX2NPLC 14
3 控制系统设计 16
3.1 多工位行车的控制要求 16
3.2多工位行车的控制电路 17
4 PLC程序设计 25
4.1 控制系统指令表 25
4.2 控制系统梯形图见附录 30
5 设计的优缺点及改进方法 31
结 论 32
致 谢 33
参考文献 34
附录 35
资料文件预览
共1文件夹,1个文件,文件总大小:797.00KB,压缩后大小:278.41KB
  • 毕业设计-多工位行车的自动控制的设计
    • Microsoft Word文档毕业设计-多工位行车的自动控制的设计.doc  [797.00KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部