学海网

鄂式破碎机工作原理（中英文翻译）
Jaw crusher principle of work
共一个word，11页，共7597个字符数（不计空格）
有预览文件，请查看。
文件摘要
Jaw crusher principle of work
As shown in Figure1，that’s one diagram of mechanism for jaw type breaker. The principle of jaw type breaker work is: the material falls by the feeder hopper within the aircraft, disperses after the tripper the material to all around the yummy treats. The electric motor after the triangle belt impetus eccentric shaft, causes to move the jaw the vertical motion to crush the material, achieved certain granularity less advanced enters the rotation cavity. The material receives the rotor in the rotation cavity and decides the jaw the attrition stave, the stave material discharges from under hopper. This machine may adjust the turnover material granularity through the loose and tight bolt and the addition and subtraction filling piece. Uses the circumference to give the material, broken than for the material scope the jaw machine is big, the yummy treats speed quick and does not stop up. Broken machine compares with the same level specification jaw, its productivity big, the product granularity small, the reduction ratio is big.


鄂式破碎机工作原理
图1为一种颚式破碎机结构简图，其工作原理是：物料由进料斗落入机内，经分离机构将物料分散到四周下料。电动机经三角皮带带动偏心轴，使动颚上下运动而压碎物料，达到一定粒度后进入回转腔。物料在回转腔内受到转子及定颚的研磨而破碎，破碎的物料从下料斗排出。该机通过松紧螺栓和加减垫片可调整进出料粒度。采用圆周给料，给料范围比颚破机大，下料速度快而不堵塞。与同等规格的颚破机相比，其生产能力大、产品粒度小、破碎比大。