《PKPM结构软件应用与设计实例》(张同伟)电子课件(附案例模型源文件)
- 资源类别：课件
- 资源分类：建筑化工
- 适用专业：PKPM结构软件应用与设计实例
- 适用年级：大学
- 上传用户：Treebeard
- 文件格式：ppt
- 文件大小：111.09MB
- 上传时间：2022/5/16 12:57:25
- 下载次数：0 次
- 浏览次数：0 次
安全检测：瑞星：安全 诺顿：安全 卡巴：安全
资料简介
《PKPM结构软件应用与设计实例》（张同伟）电子课件
第1章PKPM结构设计软件简介1
1.1PKPM系列软件简介1
1.2PKPM结构设计软件主要模块2
1.3PKPM结构设计的一般流程4
第2章结构平面建模6
2.1界面环境与基本功能6
2.2平面建模的主要流程12
2.3轴线与网格输入13
2.4楼层定义与构件布置21
2.5荷载输入与校核32
2.6设计参数定义40
2.7模型组装与保存44
2.8平面建模操作实例46
2.9本章练习56
第3章结构内力分析与计算57
3.1界面环境与基本功能57
3.2结构分析与计算的主要流程60
3.3分析与设计参数定义60
3.4模型补充定义95
3.5数据生成与计算104
3.6分析结果查看与输出105
3.7结构内力分析与计算操作实例113
3.8本章练习119
第4章地基基础分析与设计120
4.1界面环境与基本功能120
4.2地基基础分析与设计的主要流程122
4.3地质模型输入123
4.4基础模型输入131
4.5分析与设计152
4.6结果查看154
4.7地基基础分析与设计操作实例158
4.8本章练习163
第5章结构施工图设计164
5.1界面环境与基本功能164
5.2混凝土结构施工图设计的主要流程166
5.3混凝土结构施工图设计168
5.4基础施工图设计205
5.5施工图设计操作实例210
5.6本章练习222
第6章混凝土结构工程设计实例详解223
6.1框架结构4层商场设计实例223
6.2剪力墙结构16层住宅设计实例240
6.3框架-核心筒结构30层办公楼设计实例254
6.4本章练习269
第7章钢结构设计流程与实例
详解270
7.1界面环境与基本功能270
7.2基本设计条件272
7.3平面桁架结构设计275
7.4门式刚架结构设计291
7.5框架结构设计304
7.6本章练习314
第1章PKPM结构设计软件简介1
1.1PKPM系列软件简介1
1.2PKPM结构设计软件主要模块2
1.3PKPM结构设计的一般流程4
第2章结构平面建模6
2.1界面环境与基本功能6
2.2平面建模的主要流程12
2.3轴线与网格输入13
2.4楼层定义与构件布置21
2.5荷载输入与校核32
2.6设计参数定义40
2.7模型组装与保存44
2.8平面建模操作实例46
2.9本章练习56
第3章结构内力分析与计算57
3.1界面环境与基本功能57
3.2结构分析与计算的主要流程60
3.3分析与设计参数定义60
3.4模型补充定义95
3.5数据生成与计算104
3.6分析结果查看与输出105
3.7结构内力分析与计算操作实例113
3.8本章练习119
第4章地基基础分析与设计120
4.1界面环境与基本功能120
4.2地基基础分析与设计的主要流程122
4.3地质模型输入123
4.4基础模型输入131
4.5分析与设计152
4.6结果查看154
4.7地基基础分析与设计操作实例158
4.8本章练习163
第5章结构施工图设计164
5.1界面环境与基本功能164
5.2混凝土结构施工图设计的主要流程166
5.3混凝土结构施工图设计168
5.4基础施工图设计205
5.5施工图设计操作实例210
5.6本章练习222
第6章混凝土结构工程设计实例详解223
6.1框架结构4层商场设计实例223
6.2剪力墙结构16层住宅设计实例240
6.3框架-核心筒结构30层办公楼设计实例254
6.4本章练习269
第7章钢结构设计流程与实例
详解270
7.1界面环境与基本功能270
7.2基本设计条件272
7.3平面桁架结构设计275
7.4门式刚架结构设计291
7.5框架结构设计304
7.6本章练习314
资料文件预览
共130文件夹，1609个文件，文件总大小：1.69GB，压缩后大小：111.09MB
- 《PKPM结构软件应用与设计实例》(张同伟)电子课件(附案例模型源文件)
- KJ_69764《PKPM结构软件应用与设计实例》_张同伟（电子课件）
- ZY_69764《PKPM结构软件应用与设计实例》张同伟（案例模型源文件）
- 第2~5章案例
- 地基基础
JCLoadCombFAndCoeff_PM.xml [70.18KB]
jcsr40.indexjc [3.00B]
jcsr40.jc [25.80KB]
JCSR40.JCBAK [25.80KB]- JCSR40_PARAM.jc [1.81KB]
CASESINFO.PM [7.87KB]
CHECKSAT.SPS [1.94MB]
DBS_SATWE_例题_MODEL0_HOLO.PDB [430.06KB]- DBS_SYSTEM_CONSOLE_INFORMATION.PDB [1.99KB]
- Envelope_Parameter.pm [55.00B]
- Envelope_Parameter_UserDefined.pm [1.39KB]
JCDZ40.DZ [3.45KB]- jdaboveflr.pm [2.41KB]
- layadjdata.pm [22.81KB]
- PMSLABBARDB.PM [637.00B]
- PMSLABLLC.PM [151.00B]
- PMSLABPARA.PM [3.91KB]
- SatconcPara.pm [427.00B]
- SATFIREMATERIAL.PM [790.00B]
- SATINPUTSTRUSYSCOEF.PM [1.31KB]
- SATREINFORCE_PARA_BY_KST.PM [1.75KB]
- SATREINFORCE_PARA_BY_LAYER.PM [2.46KB]
- SATWE_例题_MODEL0_HOLO.PDB [94.13MB]
- SAT_ADD_COEF.PM [278.67KB]
- SAT_ADD_ZFLAG.PM [56.91KB]
- SAT_AIRLOAD.PM [12.00B]
- SAT_BDD.PM [45.93KB]
- SAT_BEMRM.PM [5.63KB]
- SAT_COEF.PM [335.02KB]
- SAT_DEF.PM [1.64KB]
- SAT_DEF_NEW.PM [781.33KB]
- SAT_INFO_ADD.PM [40.00B]
- SAT_JGGJXX.PM [86.51KB]
- SAT_QTPAR.PM [3.42KB]
- SAT_SGCXC.PM [72.00B]
- sat_submodel.pm [17.00B]
- SAT_TOW.PM [1.64KB]
- SAT_TOW_PARA.PM [59.79KB]
- SAT_TOW_PARA2.PM [3.54KB]
- SAT_TOW_T.PM [4.47KB]
- SPAS_ZHL.PM [68.00B]
- SPWIND.PM [0.00B]
- SYSTEM_CONSOLE_INFORMATION.PDB [32.00KB]
- TATDA1.PM [36.63KB]
- WBM_Kind.pm [1.10MB]
WDCNL.SAT [462.21KB]- WINDHOLE.PM [874.00B]
WORK.FNM [284.00B]- ZHIZUO.PM [0.00B]
例题 [16.65KB]
例题.01S [327.59KB]
例题.02S [337.20KB]
例题.03S [9.48KB]
例题.04S [20.49KB]
例题.05S [20.54KB]
例题.06S [21.46KB]
例题.07S [21.80KB]
例题.08S [24.92KB]
例题.09S [36.15KB]
例题.10S [40.92KB]
例题.11S [41.08KB]
例题.12S [41.08KB]
例题.13S [47.31KB]
例题.14S [52.92KB]
例题.15S [58.39KB]
例题.16S [58.53KB]
例题.17S [126.37KB]
例题.18S [255.45KB]
例题.19S [253.99KB]
例题.BWS [336.42KB]
例题.JWS [336.42KB]
例题.sqlite [12.00KB]- 例题ZHLG.PM [2.47KB]
- 第2~5章练习
- 地基基础
- JCLoadCombFAndCoeff_PM.xml [70.18KB]
- jcsr40.indexjc [3.00B]
- JCSR40.JC [23.71KB]
- JCSR40.JCBAK [23.71KB]
- JCSR40_PARAM.jc [1.81KB]
- CASESINFO.PM [9.40KB]
- CHECKSAT.SPS [272.42KB]
- DBS_SATWE_例题1_MODEL0_HOLO.PDB [73.95KB]
- DBS_SYSTEM_CONSOLE_INFORMATION.PDB [1.99KB]
- Envelope_Parameter.pm [55.00B]
- Envelope_Parameter_UserDefined.pm [1.39KB]
- JCDZ40.DZ [5.22KB]
- jdaboveflr.pm [600.00B]
- layadjdata.pm [6.06KB]
- PMSLABBARDB.PM [745.00B]
- PMSLABLLC.PM [151.00B]
- PMSLABPARA.PM [3.91KB]
- SatconcPara.pm [427.00B]
- SATFIREMATERIAL.PM [790.00B]
- SATINPUTSTRUSYSCOEF.PM [1.14KB]
- SATREINFORCE_PARA_BY_KST.PM [1.59KB]
- SATREINFORCE_PARA_BY_LAYER.PM [1.78KB]
- SATWE_例题1_MODEL0_HOLO.PDB [12.76MB]
- SAT_ADD_COEF.PM [35.33KB]
- SAT_ADD_ZFLAG.PM [7.73KB]
- SAT_AIRLOAD.PM [12.00B]
- SAT_BDD.PM [5.92KB]
- SAT_BEMRM.PM [1.86KB]
- SAT_COEF.PM [85.05KB]
- SAT_DEF.PM [1.64KB]
- SAT_DEF_NEW.PM [781.33KB]
- SAT_INFO_ADD.PM [40.00B]
- SAT_JGGJXX.PM [24.78KB]
- SAT_QTPAR.PM [824.00B]
- SAT_SGCXC.PM [20.00B]
- sat_submodel.pm [17.00B]
- SAT_TOW.PM [436.00B]
- SAT_TOW_PARA.PM [14.08KB]
- SAT_TOW_PARA2.PM [3.54KB]
- SAT_TOW_T.PM [1.07KB]
- SPAS_ZHL.PM [16.00B]
- SYSTEM_CONSOLE_INFORMATION.PDB [32.00KB]
- TATDA1.PM [2.63KB]
- WBM_Kind.pm [16.00B]
- WDCNL.SAT [77.52KB]
- WINDHOLE.PM [874.00B]
- WORK.FNM [284.00B]
- ZHIZUO.PM [0.00B]
- 例题1 [24.95KB]
- 例题1.01S [25.75KB]
- 例题1.02S [25.96KB]
- 例题1.03S [26.00KB]
- 例题1.04S [26.15KB]
- 例题1.05S [26.70KB]
- 例题1.06S [27.39KB]
- 例题1.07S [27.54KB]
- 例题1.08S [28.03KB]
- 例题1.09S [32.85KB]
- 例题1.10S [33.03KB]
- 例题1.11S [33.03KB]
- 例题1.12S [33.01KB]
- 例题1.13S [84.74KB]
- 例题1.BWS [173.09KB]
- 例题1.JWS [173.09KB]
例题1.PMA [15.38KB]- 例题1.SAT [59.04KB]
- 例题1.sqlite [12.00KB]
- 例题1ZHLG.PM [1.20KB]
- 第6章案例1
- 地基基础
- JCLoadCombFAndCoeff_PM.xml [70.18KB]
- jcsr40.indexjc [3.00B]
- jcsr40.jc [38.74KB]
- JCSR40.JCBAK [32.88KB]
- JCSR40_PARAM.jc [1.81KB]
- 4层商场 [100.73KB]
- 4层商场.01S [19.00KB]
- 4层商场.02S [29.91KB]
- 4层商场.03S [50.36KB]
- 4层商场.04S [50.32KB]
- 4层商场.05S [192.74KB]
- 4层商场.06S [414.45KB]
- 4层商场.07S [414.22KB]
- 4层商场.BWS [414.50KB]
- 4层商场.JWS [414.50KB]
- 4层商场.PMA [34.14KB]
- 4层商场.SAT [137.78KB]
- 4层商场.sqlite [12.00KB]
- 4层商场ZHLG.PM [3.33KB]
- CASESINFO.PM [9.40KB]
- CHECKSAT.SPS [693.30KB]
- DBS_SATWE_4层商场_MODEL0_HOLO.PDB [146.69KB]
- DBS_SYSTEM_CONSOLE_INFORMATION.PDB [1.99KB]
- Envelope_Parameter.pm [55.00B]
- Envelope_Parameter_UserDefined.pm [1.39KB]
- jdaboveflr.pm [1.63KB]
- layadjdata.pm [15.22KB]
- PMSLABBARDB.PM [637.00B]
- PMSLABLLC.PM [151.00B]
- PMSLABPARA.PM [3.91KB]
- SatconcPara.pm [427.00B]
- SATFIREMATERIAL.PM [790.00B]
- SATINPUTSTRUSYSCOEF.PM [1.14KB]
- SATREINFORCE_PARA_BY_KST.PM [1.59KB]
- SATREINFORCE_PARA_BY_LAYER.PM [1.78KB]
- SATWE_4层商场_MODEL0_HOLO.PDB [39.48MB]
- SAT_ADD_COEF.PM [95.59KB]
- SAT_ADD_ZFLAG.PM [22.05KB]
- SAT_AIRLOAD.PM [12.00B]
- SAT_BDD.PM [15.59KB]
- SAT_BEMRM.PM [5.57KB]
- SAT_COEF.PM [222.84KB]
- SAT_DEF.PM [1.64KB]
- SAT_DEF_NEW.PM [781.33KB]
- SAT_INFO_ADD.PM [40.00B]
- SAT_JGGJXX.PM [55.53KB]
- SAT_QTPAR.PM [824.00B]
- SAT_SGCXC.PM [20.00B]
- sat_submodel.pm [17.00B]
- SAT_TOW.PM [436.00B]
- SAT_TOW_PARA.PM [14.08KB]
- SAT_TOW_PARA2.PM [3.54KB]
- SAT_TOW_T.PM [2.38KB]
- SPAS_ZHL.PM [16.00B]
- SYSTEM_CONSOLE_INFORMATION.PDB [32.00KB]
- TATDA1.PM [18.34KB]
- WBM_Kind.pm [16.00B]
- WDCNL.SAT [87.83KB]
- WINDHOLE.PM [874.00B]
- WORK.FNM [284.00B]
- WORKSPS.FNM [33.00B]
- ZHIZUO.PM [0.00B]
- 第6章案例2
- $强刚
- CASESINFO.PM [7.87KB]
- CHECKSAT.SPS [2.88MB]
- DATW.pm [110.60KB]
- DBS_SATWE_剪力墙住宅_MODEL0_HOLO.PDB [49.75KB]
- Envelope_Parameter.pm [55.00B]
- Envelope_Parameter_UserDefined.pm [1.39KB]
- JCDZ40.DZ [3.45KB]
- jdaboveflr.pm [8.47KB]
- layadjdata.pm [52.54KB]
- pm3j_2jc.pm [4.54KB]
- pm3j_perflr.pm [92.33KB]
- pm3j_perflr_hori.pm [612.00B]
- PMSLABBARDB.PM [637.00B]
- PMSLABLLC.PM [151.00B]
- PMSLABPARA.PM [3.91KB]
- SatconcPara.pm [427.00B]
- SATFIREMATERIAL.PM [790.00B]
- SATINPUTSTRUSYSCOEF.PM [1.31KB]
- SATREINFORCE_PARA_BY_KST.PM [1.67KB]
- SATREINFORCE_PARA_BY_LAYER.PM [2.46KB]
- SATWE_剪力墙住宅_MODEL0_HOLO.PDB [98.66MB]
- SAT_ADD_COEF.PM [352.69KB]
- SAT_ADD_ZFLAG.PM [50.13KB]
- SAT_AIRLOAD.PM [12.00B]
- SAT_BDD.PM [56.94KB]
- SAT_BEMRM.PM [11.68KB]
- SAT_COEF.PM [803.79KB]
- SAT_DEF.PM [1.64KB]
- SAT_DEF_NEW.PM [781.33KB]
- SAT_INFO_ADD.PM [40.00B]
- SAT_JGGJXX.PM [132.05KB]
- SAT_QTPAR.PM [3.42KB]
- SAT_SGCXC.PM [80.00B]
- sat_submodel.pm [17.00B]
- SAT_TOW.PM [1.91KB]
- SAT_TOW_PARA.PM [59.79KB]
- SAT_TOW_PARA2.PM [3.54KB]
- SAT_TOW_T.PM [12.31KB]
- SPAS_ZHL.PM [68.00B]
- TATDA1.PM [90.39KB]
- WBM_Kind.pm [2.03MB]
- WINDHOLE.PM [980.00B]
- WORK.FNM [284.00B]
- ZHIZUO.PM [0.00B]
- 剪力墙住宅 [34.89KB]
- 剪力墙住宅.01S [633.36KB]
- 剪力墙住宅.02S [112.92KB]
- 剪力墙住宅.03S [116.27KB]
- 剪力墙住宅.04S [116.07KB]
- 剪力墙住宅.05S [266.00KB]
- 剪力墙住宅.06S [274.23KB]
- 剪力墙住宅.07S [447.25KB]
- 剪力墙住宅.08S [503.31KB]
- 剪力墙住宅.09S [492.58KB]
- 剪力墙住宅.10S [494.42KB]
- 剪力墙住宅.11S [624.58KB]
- 剪力墙住宅.12S [623.29KB]
- 剪力墙住宅.13S [640.01KB]
- 剪力墙住宅.14S [628.77KB]
- 剪力墙住宅.15S [632.15KB]
- 剪力墙住宅.16S [632.86KB]
- 剪力墙住宅.17S [632.94KB]
- 剪力墙住宅.18S [633.09KB]
- 剪力墙住宅.19S [632.46KB]
剪力墙住宅.B [34.89KB]
剪力墙住宅.BT [11.24KB]- 剪力墙住宅.BWS [632.32KB]
- 剪力墙住宅.JWS [632.32KB]
- 剪力墙住宅.PMA [52.69KB]
- 剪力墙住宅.SAT [206.45KB]
- 剪力墙住宅.sqlite [12.00KB]
剪力墙住宅.T [65.34KB]- 剪力墙住宅.ZIP
剪力墙住宅.1WS [405.79KB]
剪力墙住宅.2WS [405.85KB]
剪力墙住宅.3WS [405.58KB]
剪力墙住宅.4WS [199.77KB]
剪力墙住宅.5WS [387.63KB]
剪力墙住宅.6WS [403.94KB]
剪力墙住宅.7WS [405.89KB]
剪力墙住宅.8WS [405.96KB]
剪力墙住宅.9WS [405.82KB]- 剪力墙住宅ZHLG.PM [3.64KB]
- 12_模型数据备份
- 剪力墙住宅.JWS [405.58KB]
- 地基基础
- JCLoadCombFAndCoeff_PM.xml [70.18KB]
- jcsr40.indexjc [3.00B]
- JCSR40.JC [49.31KB]
- JCSR40.JCBAK [49.31KB]
- JCSR40_PARAM.jc [1.81KB]
- CASESINFO.PM [7.87KB]
- CHECKSAT.SPS [2.88MB]
- DATW.pm [110.60KB]
- DBS_SATWE_剪力墙住宅_MODEL0_HOLO.PDB [486.55KB]
- DBS_SYSTEM_CONSOLE_INFORMATION.PDB [1.99KB]
- Envelope_Parameter.pm [55.00B]
- Envelope_Parameter_UserDefined.pm [1.39KB]
- JCDZ40.DZ [3.45KB]
- jdaboveflr.pm [8.47KB]
- layadjdata.pm [52.54KB]
- pm3j_2jc.pm [4.54KB]
- pm3j_perflr.pm [92.33KB]
- pm3j_perflr_hori.pm [612.00B]
- PMSLABBARDB.PM [637.00B]
- PMSLABLLC.PM [151.00B]
- PMSLABPARA.PM [3.91KB]
- SatconcPara.pm [427.00B]
- SATFIREMATERIAL.PM [790.00B]
- SATINPUTSTRUSYSCOEF.PM [1.31KB]
- SATREINFORCE_PARA_BY_KST.PM [1.67KB]
- SATREINFORCE_PARA_BY_LAYER.PM [2.46KB]
- SATWE_剪力墙住宅_MODEL0_HOLO.PDB [153.70MB]
- SAT_ADD_COEF.PM [352.69KB]
- SAT_ADD_ZFLAG.PM [50.13KB]
- SAT_AIRLOAD.PM [12.00B]
- SAT_BDD.PM [56.94KB]
- SAT_BEMRM.PM [11.68KB]
- SAT_COEF.PM [803.79KB]
- SAT_DEF.PM [1.64KB]
- SAT_DEF_NEW.PM [781.33KB]
- SAT_INFO_ADD.PM [40.00B]
- SAT_JGGJXX.PM [132.05KB]
- SAT_QTPAR.PM [3.42KB]
- SAT_SGCXC.PM [80.00B]
- sat_submodel.pm [17.00B]
- SAT_TOW.PM [1.91KB]
- SAT_TOW_PARA.PM [59.79KB]
- SAT_TOW_PARA2.PM [3.54KB]
- SAT_TOW_T.PM [12.31KB]
- SPAS_ZHL.PM [68.00B]
- SYSTEM_CONSOLE_INFORMATION.PDB [32.00KB]
- TATDA1.PM [92.57KB]
- WBM_Kind.pm [2.52MB]
- WDCNL.SAT [699.83KB]
- WINDHOLE.PM [980.00B]
- WORK.FNM [284.00B]
- ZHIZUO.PM [0.00B]
- 剪力墙住宅 [34.89KB]
- 剪力墙住宅.01S [633.36KB]
- 剪力墙住宅.02S [112.92KB]
- 剪力墙住宅.03S [116.27KB]
- 剪力墙住宅.04S [116.07KB]
- 剪力墙住宅.05S [266.00KB]
- 剪力墙住宅.06S [274.23KB]
- 剪力墙住宅.07S [447.25KB]
- 剪力墙住宅.08S [503.31KB]
- 剪力墙住宅.09S [492.58KB]
- 剪力墙住宅.10S [494.42KB]
- 剪力墙住宅.11S [624.58KB]
- 剪力墙住宅.12S [623.29KB]
- 剪力墙住宅.13S [640.01KB]
- 剪力墙住宅.14S [628.77KB]
- 剪力墙住宅.15S [632.15KB]
- 剪力墙住宅.16S [632.86KB]
- 剪力墙住宅.17S [632.94KB]
- 剪力墙住宅.18S [633.09KB]
- 剪力墙住宅.19S [632.46KB]
- 剪力墙住宅.BWS [633.55KB]
- 剪力墙住宅.JWS [633.55KB]
- 剪力墙住宅.PMA [52.69KB]
- 剪力墙住宅.SAT [206.45KB]
- 剪力墙住宅.sqlite [12.00KB]
- 剪力墙住宅.T [65.34KB]
- 剪力墙住宅ZHLG.PM [3.64KB]
- 第6章案例3
- 地基基础
- JCLoadCombFAndCoeff_PM.xml [70.61KB]
- jcsr40.indexjc [3.00B]
- jcsr40.jc [49.88KB]
- JCSR40.JCBAK [49.90KB]
- JCSR40_PARAM.jc [1.81KB]
- CASESINFO.PM [9.41KB]
- CHECKSAT.SPS [4.29MB]
- DBS_SATWE_例题_MODEL0_HOLO.PDB [801.83KB]
- DBS_SYSTEM_CONSOLE_INFORMATION.PDB [1.99KB]
- Envelope_Parameter.pm [55.00B]
- Envelope_Parameter_UserDefined.pm [1.39KB]
- JCDZ40.DZ [4.75KB]
- jdaboveflr.pm [10.65KB]
- layadjdata.pm [80.51KB]
- PMSLABBARDB.PM [637.00B]
- PMSLABLLC.PM [151.00B]
- PMSLABPARA.PM [3.91KB]
- SatconcPara.pm [427.00B]
SATFDK.OUT [17.58KB]- SATFDK.SAT [1.82MB]
- SATFIREMATERIAL.PM [790.00B]
- SATINPUTSTRUSYSCOEF.PM [1.53KB]
- SATREINFORCE_PARA_BY_KST.PM [1.77KB]
- SATREINFORCE_PARA_BY_LAYER.PM [3.19KB]
- SATWE_例题_MODEL0_HOLO.PDB [268.20MB]
- SAT_ADD_COEF.PM [595.93KB]
- SAT_ADD_ZFLAG.PM [92.78KB]
- SAT_AIRLOAD.PM [12.00B]
- SAT_BDD.PM [96.89KB]
- SAT_BEMRM.PM [18.39KB]
- SAT_COEF.PM [1.28MB]
- SAT_DEF.PM [1.64KB]
- SAT_DEF_NEW.PM [781.33KB]
- SAT_INFO_ADD.PM [40.00B]
- SAT_JGGJXX.PM [243.17KB]
- SAT_QTPAR.PM [6.64KB]
- SAT_SGCXC.PM [136.00B]
- sat_submodel.pm [17.00B]
- SAT_TOW.PM [3.14KB]
- SAT_TOW_PARA.PM [116.04KB]
- SAT_TOW_PARA2.PM [3.54KB]
- SAT_TOW_T.PM [16.14KB]
- SPAS_ZHL.PM [132.00B]
- SYSTEM_CONSOLE_INFORMATION.PDB [32.00KB]
- TATDA1.PM [151.69KB]
- WBM_Kind.pm [4.04MB]
- WDCNL.SAT [1.15MB]
- WINDHOLE.PM [874.00B]
- WORK.FNM [284.00B]
- WORKSPS.FNM [33.00B]
- ZHIZUO.PM [0.00B]
- 例题 [40.47KB]
- 例题.01S [953.00KB]
- 例题.02S [952.45KB]
- 例题.03S [953.87KB]
- 例题.04S [952.59KB]
- 例题.05S [102.07KB]
- 例题.06S [120.23KB]
- 例题.07S [128.13KB]
- 例题.08S [128.30KB]
- 例题.09S [136.94KB]
- 例题.10S [470.34KB]
- 例题.11S [470.53KB]
- 例题.12S [471.31KB]
- 例题.13S [470.33KB]
- 例题.14S [953.09KB]
- 例题.15S [954.66KB]
- 例题.16S [953.37KB]
- 例题.17S [952.46KB]
- 例题.18S [953.45KB]
- 例题.19S [955.15KB]
- 例题.BWS [952.54KB]
- 例题.JWS [952.54KB]
- 例题.PMA [79.29KB]
- 例题.SAT [293.77KB]
- 例题.sqlite [44.00KB]
- 例题ZHLG.PM [7.10KB]
- 第7章案例1
- 第7章钢屋架
- BAK
- 30M跨梯形钢屋架-20_12_11_17_34_43.zip
30M跨梯形钢屋架.JH [281.53KB]- 30M跨梯形钢屋架-20_12_11_17_49_24.zip
- 30M跨梯形钢屋架.JH [281.53KB]
- 30M跨梯形钢屋架-20_12_11_18_29_30.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_11_18_37_43.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_11_18_38_09.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_11_18_44_18.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_11_18_49_12.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_11_18_50_24.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_11_20_27_43.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_12_00_01_42.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- 30M跨梯形钢屋架-20_12_12_00_09_15.zip
- 30M跨梯形钢屋架.JH [376.07KB]
- CalcTemp
- D-L-CAL.T [43.70KB]
- DG-D-L-CAL.T [35.34KB]
- KLM-CAL.T [59.98KB]
- L-L-CAL.T [41.96KB]
- L-L1-CAL.T [35.34KB]
- L-L2-CAL.T [43.70KB]
- L-L3-CAL.T [43.70KB]
- L-L4-CAL.T [43.70KB]
- L-L5-CAL.T [43.70KB]
30M跨梯形钢屋架.JCN [384.00B]- 30M跨梯形钢屋架.JH [376.07KB]
30M跨梯形钢屋架.SEC [824.00B]
30M跨梯形钢屋架.STS [105.76KB]- 30M跨梯形钢屋架.T [17.97KB]
- 30M跨梯形钢屋架0.SEC [824.00B]
- 30M跨梯形钢屋架NT.STS [1.37KB]
30M跨梯形钢屋架PKMODEL.MLL [349.00B]- 30M跨梯形钢屋架SEC.STS [700.00B]
- AS.T [64.00KB]
basedata.tmp [6.21KB]- build.t [0.00B]
- buildZip.sts [202.00B]
- CCDA1.T [531.33KB]
- CCDA2.T [531.33KB]
CeShiData.txt [3.12MB]- checkResult.txt [400.40KB]
![[非法语句]志文件](https://r.xuehi.cn/images/file/log.gif)
cmdMngr.log [1.51KB]- D-L.T [43.89KB]
- D-M.T [42.17KB]
- D-V.T [42.16KB]
- DEF_ABS.T [22.64KB]
- DG-D-L.T [43.90KB]
- dhb.T [52.24KB]
- DISP-D.T [38.53KB]
- DISP-DL.T [38.54KB]
- EL.T [42.17KB]
fort.77 [773.26MB]- JCdata.out [9.79KB]
- KLM.T [60.18KB]
- L-L.T [42.15KB]
- L-L1.T [35.53KB]
- L-L2.T [43.89KB]
- L-L3.T [43.89KB]
- L-L4.T [43.89KB]
- L-L5.T [43.89KB]
- L-N.T [52.88KB]
- M.T [62.39KB]
- MemberInfo.out [8.00KB]
- MemInfo.Out [396.20KB]
- mjOpenGL.T [187.03KB]
- MODE.T [4.46KB]
- N.T [62.38KB]
- optimize.txt [14.28KB]
- OptPara.sts [160.00B]
- OptTemp.t [23.78KB]
PK0.PK [8.34KB]- PK1.PK [107.06KB]
PK11.html [589.00B]- pk11.out [497.53KB]
- PK11left.html [7.22KB]
- PK11right.html [343.71KB]
- PKDEF.PK [0.00B]
- PKn.PK [11.01KB]
- pmt.t [23.66KB]
PrjInfoFi.json [91.00B]- PROGINFO.STS [284.00B]
- Q.T [62.46KB]
- STIFMJ.PK [204.00B]
- STS0.PK [8.34KB]
- Stscpj.out [661.00B]
- temp.t [23.78KB]
- truss.sts [24.58KB]
- Truss.T [516.52KB]
- UpdateUserLib.log [0.00B]
- ZZ-FM.T [24.41KB]
施工图.Dwg [292.58KB]- 第7章案例2
- 第7章门式刚架
- BAK
- ZC1-20_12_11_23_17_50.zip
- ZC1.JH [215.94KB]
- ZC1-20_12_11_23_18_20.zip
- ZC1.JH [215.94KB]
- ZC1-20_12_11_23_19_39.zip
- ZC1.JH [215.94KB]
- ZC2-20_12_11_23_19_12.zip
- ZC2.JH [215.94KB]
- ZC2-20_12_11_23_19_58.zip
- ZC2.JH [215.94KB]
- pk-10_
- 10轴线刚架施工详图.T [698.75KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- klm.t [34.37KB]
- LiveLoad.tmp [59.57KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-10.jcn [1.25KB]
- mj-10.jh [298.97KB]
- mj-10.sts [24.68KB]
- mj-10.T [12.95KB]
- mj-10jc.sts [608.00B]
- mj-10mj.sts [68.52KB]
- mj-10MjPara.sts [1.53KB]
- mj-10nt.sts [892.00B]
- mj-10pkmodel.mll [705.00B]
mj-10_2.hf [132.10KB]
Mj2DDraw.dat [840.00B]- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- pk0.pk [4.10KB]
- pk11.out [108.94KB]
- sts0.pk [4.10KB]
- Stscpj.out [885.00B]
- TfName.sts [32.00B]
- pk-11_
- 11轴线刚架施工详图.T [586.18KB]
- AS.T [29.89KB]
- basedata.tmp [2.59KB]
- colmFoot-1.out [847.00B]
- colmFoot-2.out [847.00B]
- colmFoot-3.out [847.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [847.00B]
- colmFoot-6.out [847.00B]
- colmFoot-7.out [847.00B]
- D-L.T [28.33KB]
- DebugInfro.txt [0.00B]
- JCdata.out [32.26KB]
- klm.t [34.37KB]
- L-L.T [28.33KB]
- L-W.T [35.18KB]
- LiveLoad.tmp [8.38KB]
- MainGJMatData.sts [4.39KB]
- MemberInfo.out [2.59KB]
- MemInfo.Out [92.87KB]
- mj-11.jcn [1.25KB]
- mj-11.jh [298.97KB]
- mj-11.SEC [484.00B]
- mj-11.sts [24.63KB]
- mj-11.T [19.38KB]
- mj-110.SEC [484.00B]
- mj-11jc.sts [608.00B]
- mj-11mj.sts [61.72KB]
- mj-11MjPara.sts [1.53KB]
- mj-11nt.sts [892.00B]
- mj-11pkmodel.mll [705.00B]
- mj-11SEC.STS [556.00B]
- mj-11_1.hf [132.10KB]
- mj-11_2.hf [132.10KB]
- mj-11_3.hf [132.10KB]
- Mj2DDraw.dat [840.00B]
- Mj2dModel.MLL [745.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- mjOpenGL.T [46.71KB]
- NODE.OUT [22.67KB]
- NODEERR.OUT [2.27KB]
- optimize.txt [5.38KB]
- OptPara.sts [160.00B]
- pk0.pk [4.07KB]
- PK1.PK [14.04KB]
- pk11.out [124.06KB]
- PKDEF.PK [416.00B]
- PKn.PK [4.55KB]
- PModel.TMP [872.00B]
- R-W.T [35.20KB]
- sts0.pk [4.07KB]
- Stscpj.out [885.00B]
- temp.t [21.49KB]
- TfName.sts [32.00B]
- pk-1_
- BAK
- mj-1-20_12_11_20_53_30.zip
- mj-1.JH [225.88KB]
- mj-1-20_12_11_20_53_31.zip
- mj-1.JH [225.88KB]
- mj-1-20_12_11_21_48_48.zip
- mj-1.JH [225.88KB]
- mj-1-20_12_11_22_08_11.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_08_51.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_09_51.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_11_40.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_15_12.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_15_15.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_15_35.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_15_44.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_16_14.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_22_16_25.zip
- mj-1.JH [298.97KB]
- mj-1-20_12_11_23_28_26.zip
- mj-1.JH [298.97KB]
- CalcTemp
- D-L-CAL.T [28.13KB]
- DG-D-L-CAL.T [23.16KB]
- KLM-CAL.T [34.17KB]
- L-L1-CAL.T [23.16KB]
- L-L2-CAL.T [28.13KB]
- L-L3-CAL.T [28.13KB]
- L-L4-CAL.T [28.13KB]
- L-L5-CAL.T [28.13KB]
- L-W-1-CAL.T [34.98KB]
- L-W-2-CAL.T [23.21KB]
- L-W-3-CAL.T [23.21KB]
- R-W-1-CAL.T [34.99KB]
- R-W-2-CAL.T [23.21KB]
- R-W-3-CAL.T [23.21KB]
- 1轴线刚架施工详图.T [523.02KB]
- AS.T [29.88KB]
- basedata.tmp [2.59KB]
build.mdb [400.00KB]- build.t [35.57KB]
- CeShiData.txt [94.39KB]
- checkResult.txt [97.88KB]
- colmFoot-1.out [847.00B]
- colmFoot-2.out [847.00B]
- colmFoot-3.out [847.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [847.00B]
- colmFoot-6.out [847.00B]
- colmFoot-7.out [847.00B]
- D-L.T [28.33KB]
- DebugInfro.txt [0.00B]
- DG-D-L.T [23.37KB]
- fort.77 [2.95MB]
- JCdata.out [32.26KB]
- KLM.T [34.37KB]
- L-L1.T [23.36KB]
- L-L2.T [28.33KB]
- L-L3.T [28.33KB]
- L-L4.T [28.33KB]
- L-L5.T [28.33KB]
- L-W-1.T [35.12KB]
- L-W-2.T [23.35KB]
- L-W-3.T [23.35KB]
- MainGJMatData.sts [4.52KB]
- MemberInfo.out [2.59KB]
- MemInfo.Out [92.87KB]
- mj-1.JCN [1.25KB]
- mj-1.jh [298.97KB]
- mj-1.SEC [484.00B]
- mj-1.STS [24.63KB]
- mj-1.T [13.07KB]
- mj-10.SEC [484.00B]
- mj-1JC.STS [608.00B]
- mj-1Mj.STS [61.94KB]
- mj-1MjPara.STS [1.53KB]
- mj-1NT.STS [892.00B]
- mj-1pkmodel.mll [705.00B]
- mj-1SEC.STS [556.00B]
- Mj2DDraw.dat [840.00B]
- Mj2dModel.MLL [745.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- mjOpenGL.T [46.71KB]
- NODE.OUT [23.42KB]
- NODEERR.OUT [2.27KB]
- optimize.txt [5.37KB]
- OptPara.sts [160.00B]
- PK0.PK [4.07KB]
- PK1.PK [14.69KB]
- pk11.out [124.06KB]
- PKDEF.PK [416.00B]
- PKn.PK [4.55KB]
- PModel.TMP [872.00B]
- PrjInfoFi.json [80.00B]
- R-W-1.T [35.13KB]
- R-W-2.T [23.35KB]
- R-W-3.T [23.35KB]
- STIFMJ.PK [364.00B]
- STS0.PK [4.07KB]
- Stscpj.out [885.00B]
- temp.t [21.29KB]
- TfName.sts [30.00B]
- pk-2_
- BAK
- mj-2-20_12_11_20_53_32.zip
- mj-2.JH [225.88KB]
- mj-2-20_12_11_22_11_49.zip
- mj-2.JH [225.88KB]
- mj-2-20_12_11_22_13_46.zip
- mj-2.JH [298.97KB]
- mj-2-20_12_11_22_13_59.zip
- mj-2.JH [298.97KB]
- mj-2-20_12_11_22_14_49.zip
- mj-2.JH [298.97KB]
- mj-2-20_12_11_22_15_07.zip
- mj-2.JH [298.97KB]
- mj-2-20_12_11_23_28_28.zip
- mj-2.JH [298.97KB]
- CalcTemp
- D-L-CAL.T [28.13KB]
- DG-D-L-CAL.T [23.16KB]
- KLM-CAL.T [34.17KB]
- L-L1-CAL.T [23.16KB]
- L-L2-CAL.T [28.13KB]
- L-L3-CAL.T [28.13KB]
- L-L4-CAL.T [28.13KB]
- L-L5-CAL.T [28.13KB]
- L-W-1-CAL.T [34.98KB]
- L-W-2-CAL.T [23.21KB]
- L-W-3-CAL.T [23.21KB]
- R-W-1-CAL.T [34.99KB]
- R-W-2-CAL.T [23.21KB]
- R-W-3-CAL.T [23.21KB]
- 2轴线刚架施工详图.T [658.70KB]
- AS.T [29.89KB]
- basedata.tmp [2.59KB]
- CeShiData.txt [94.39KB]
- checkResult.txt [81.78KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- D-L.T [28.33KB]
- DebugInfro.txt [0.00B]
- DG-D-L.T [23.37KB]
- fort.77 [2.40MB]
- JCdata.out [32.46KB]
- KLM.T [34.37KB]
- L-L1.T [23.36KB]
- L-L2.T [28.33KB]
- L-L3.T [28.33KB]
- L-L4.T [28.33KB]
- L-L5.T [28.33KB]
- L-W-1.T [35.12KB]
- L-W-2.T [23.35KB]
- L-W-3.T [23.35KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-2.JCN [1.25KB]
- mj-2.jh [298.97KB]
- mj-2.SEC [484.00B]
- mj-2.STS [24.68KB]
- mj-2.T [13.07KB]
- mj-20.SEC [484.00B]
- mj-2jc.sts [608.00B]
- mj-2mj.sts [68.52KB]
- mj-2MjPara.sts [1.53KB]
- mj-2NT.STS [892.00B]
- mj-2pkmodel.mll [705.00B]
- mj-2SEC.STS [556.00B]
- Mj2DDraw.dat [840.00B]
- Mj2dModel.MLL [745.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- mjOpenGL.T [46.71KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- optimize.txt [5.37KB]
- PK0.PK [4.10KB]
- PK1.PK [14.69KB]
- pk11.out [108.94KB]
- PKDEF.PK [416.00B]
- PKn.PK [4.55KB]
- PModel.TMP [872.00B]
- PrjInfoFi.json [80.00B]
- R-W-1.T [35.13KB]
- R-W-2.T [23.35KB]
- R-W-3.T [23.35KB]
- STIFMJ.PK [364.00B]
- STS0.PK [4.10KB]
- Stscpj.out [885.00B]
- temp.t [21.49KB]
- TfName.sts [30.00B]
- pk-3_
- BAK
- mj-Y36000-20_12_11_23_30_55.zip
- mj-Y36000.JH [236.85KB]
- 3轴线刚架施工详图.T [667.39KB]
- AS.T [29.89KB]
- CeShiData.txt [94.39KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- KLM.T [41.57KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-3.jcn [1.25KB]
- mj-3.jh [298.97KB]
- mj-3.sts [24.68KB]
- mj-3jc.sts [608.00B]
- mj-3mj.sts [67.70KB]
- mj-3MjPara.sts [1.53KB]
- mj-3nt.sts [892.00B]
- mj-3pkmodel.mll [705.00B]
- mj-Y36000.JH [236.85KB]
- Mj2DDraw.dat [840.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- pk0.pk [4.10KB]
- pk11.out [108.94KB]
- STS0.PK [3.74KB]
- Stscpj.out [885.00B]
- TfName.sts [30.00B]
- pk-4_
- 4轴线刚架施工详图.T [667.39KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- klm.t [34.37KB]
- LiveLoad.tmp [57.51KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-4.jcn [1.25KB]
- mj-4.jh [298.97KB]
- mj-4.sts [24.68KB]
- mj-4jc.sts [608.00B]
- mj-4mj.sts [67.70KB]
- mj-4MjPara.sts [1.53KB]
- mj-4nt.sts [892.00B]
- mj-4pkmodel.mll [705.00B]
- Mj2DDraw.dat [840.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- pk0.pk [4.10KB]
- pk11.out [108.94KB]
- sts0.pk [4.10KB]
- Stscpj.out [885.00B]
- TfName.sts [30.00B]
- pk-5_
- BAK
- mj-5-20_12_11_20_42_55.zip
- mj-5.JH [225.88KB]
- 5轴线刚架施工详图.T [667.39KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- klm.t [34.37KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-5.jcn [1.25KB]
- mj-5.jh [298.97KB]
- mj-5.sts [24.68KB]
- mj-5.T [16.48KB]
- mj-5jc.sts [608.00B]
- mj-5mj.sts [67.70KB]
- mj-5MjPara.sts [1.53KB]
- mj-5nt.sts [892.00B]
- mj-5pkmodel.mll [705.00B]
- Mj2DDraw.dat [840.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- pk0.pk [4.10KB]
- pk11.out [108.94KB]
- sts0.pk [4.10KB]
- Stscpj.out [885.00B]
- TfName.sts [30.00B]
- pk-6_
- 6轴线刚架施工详图.T [667.39KB]
- AS.T [29.89KB]
- basedata.tmp [2.59KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- D-L.T [28.33KB]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- klm.t [34.37KB]
- L-L.T [28.33KB]
- L-W.T [35.18KB]
- LiveLoad.tmp [58.20KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-6.jcn [1.25KB]
- mj-6.jh [298.97KB]
- mj-6.SEC [484.00B]
- mj-6.sts [24.68KB]
- mj-6.T [37.02KB]
mj-60.SECC [484.00B]- mj-6jc.sts [608.00B]
- mj-6mj.sts [67.70KB]
- mj-6MjPara.sts [1.53KB]
- mj-6nt.sts [892.00B]
- mj-6pkmodel.mll [705.00B]
- mj-6SEC.STS [556.00B]
- mj-6_1.hf [132.10KB]
- mj-6_2.hf [132.10KB]
- Mj2DDraw.dat [840.00B]
- Mj2dModel.MLL [745.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- mjOpenGL.T [46.71KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- optimize.txt [5.37KB]
- OptPara.sts [160.00B]
- pk0.pk [4.10KB]
- PK1.PK [14.04KB]
- pk11.out [108.94KB]
- PKDEF.PK [416.00B]
- PKn.PK [4.55KB]
- PModel.TMP [872.00B]
- R-W.T [35.20KB]
- sts0.pk [4.10KB]
- Stscpj.out [885.00B]
- temp.t [21.49KB]
- TfName.sts [30.00B]
- pk-7_
- 7轴线刚架施工详图.T [667.39KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- klm.t [34.37KB]
- LiveLoad.tmp [58.54KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-7.jcn [1.25KB]
- mj-7.jh [298.97KB]
- mj-7.sts [24.68KB]
- mj-7jc.sts [608.00B]
- mj-7mj.sts [67.70KB]
- mj-7MjPara.sts [1.53KB]
- mj-7nt.sts [892.00B]
- mj-7pkmodel.mll [705.00B]
- Mj2DDraw.dat [840.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- pk0.pk [4.10KB]
- pk11.out [108.94KB]
- sts0.pk [4.10KB]
- Stscpj.out [885.00B]
- TfName.sts [30.00B]
- pk-8_
- 8轴线刚架施工详图.T [667.39KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- klm.t [34.37KB]
- LiveLoad.tmp [58.88KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-8.jcn [1.25KB]
- mj-8.jh [298.97KB]
- mj-8.sts [24.68KB]
- mj-8jc.sts [608.00B]
- mj-8mj.sts [67.70KB]
- mj-8MjPara.sts [1.53KB]
- mj-8nt.sts [892.00B]
- mj-8pkmodel.mll [705.00B]
- Mj2DDraw.dat [840.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- pk0.pk [4.10KB]
- pk11.out [108.94KB]
- sts0.pk [4.10KB]
- Stscpj.out [885.00B]
- TfName.sts [30.00B]
- pk-9_
- 9轴线刚架施工详图.T [667.39KB]
- colmFoot-1.out [804.00B]
- colmFoot-2.out [804.00B]
- colmFoot-3.out [804.00B]
- colmFoot-4.out [804.00B]
- colmFoot-5.out [804.00B]
- colmFoot-6.out [804.00B]
- colmFoot-7.out [804.00B]
- DebugInfro.txt [0.00B]
- JCdata.out [32.46KB]
- klm.t [34.37KB]
- LiveLoad.tmp [59.23KB]
- MainGJMatData.sts [5.91KB]
- MemberInfo.out [2.67KB]
- MemInfo.Out [76.95KB]
- mj-9.jcn [1.25KB]
- mj-9.jh [298.97KB]
- mj-9.sts [24.68KB]
- mj-9jc.sts [608.00B]
- mj-9mj.sts [67.70KB]
- mj-9MjPara.sts [1.53KB]
- mj-9nt.sts [892.00B]
- mj-9pkmodel.mll [705.00B]
- Mj2DDraw.dat [840.00B]
- MJInfroAuto.STS [200.00B]
- MJNODE.TMP [1.72KB]
- NODE.OUT [32.52KB]
- NODEERR.OUT [3.21KB]
- pk0.pk [4.10KB]
- pk11.out [108.94KB]
- sts0.pk [4.10KB]
- Stscpj.out [885.00B]
- TfName.sts [30.00B]
- pk-A_
- JCdata.out [47.47KB]
- KLM.T [41.01KB]
- MemberInfo.out [3.43KB]
- mj-A.JCN [1.96KB]
- mj-A.JH [137.54KB]
- mj-A.STS [35.26KB]
- mj-A.T [13.77KB]
- mj-ACAL.sts [4.83KB]
- mj-ANT.STS [548.00B]
- mj-ASEC.STS [412.00B]
- pk0.pk [3.37KB]
- PK1.PK [35.60KB]
- pk11.out [168.18KB]
- PKDEF.PK [0.00B]
- PKn.PK [5.29KB]
- STS0.PK [3.37KB]
- Stscpj.out [12.53KB]
- pk-B_
- JCdata.out [94.19KB]
- KLM.T [44.21KB]
- MemberInfo.out [2.31KB]
- mj-B.JCN [1.96KB]
- mj-B.JH [130.44KB]
- mj-B.STS [15.69KB]
- mj-B.T [13.05KB]
- mj-BCAL.sts [3.68KB]
- mj-BNT.STS [548.00B]
- mj-BSEC.STS [196.00B]
- pk0.pk [2.24KB]
- PK1.PK [15.99KB]
- pk11.out [79.67KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STS0.PK [2.24KB]
- Stscpj.out [650.00B]
- pk-C_
- JCdata.out [94.19KB]
- KLM.T [44.21KB]
- MemberInfo.out [2.31KB]
- mj-C.JCN [1.96KB]
- mj-C.JH [130.44KB]
- mj-C.STS [15.69KB]
- mj-C.T [13.05KB]
- mj-CCAL.sts [3.68KB]
- mj-CNT.STS [548.00B]
- mj-CSEC.STS [196.00B]
- pk0.pk [2.24KB]
- PK1.PK [15.99KB]
- pk11.out [79.67KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STS0.PK [2.24KB]
- Stscpj.out [650.00B]
- pk-D_
- JCdata.out [51.56KB]
- KLM.T [39.98KB]
- MemberInfo.out [3.01KB]
- mj-D.JCN [1.96KB]
- mj-D.JH [135.38KB]
- mj-D.STS [29.63KB]
- mj-D.T [13.56KB]
- mj-DCAL.sts [4.50KB]
- mj-DNT.STS [548.00B]
- mj-DSEC.STS [340.00B]
- pk0.pk [2.98KB]
- PK1.PK [29.98KB]
- pk11.out [145.22KB]
- PKDEF.PK [0.00B]
- PKn.PK [4.45KB]
- STS0.PK [2.98KB]
- Stscpj.out [11.09KB]
- pk-E_
- JCdata.out [94.19KB]
- KLM.T [44.21KB]
- MemberInfo.out [2.31KB]
- mj-E.JCN [1.96KB]
- mj-E.JH [130.44KB]
- mj-E.STS [15.69KB]
- mj-E.T [13.05KB]
- mj-ECAL.sts [3.68KB]
- mj-ENT.STS [548.00B]
- mj-ESEC.STS [196.00B]
- pk0.pk [2.24KB]
- PK1.PK [15.99KB]
- pk11.out [79.67KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STS0.PK [2.24KB]
- Stscpj.out [650.00B]
- pk-F_
- JCdata.out [94.19KB]
- KLM.T [44.21KB]
- MemberInfo.out [2.31KB]
- mj-F.JCN [1.96KB]
- mj-F.JH [130.44KB]
- mj-F.STS [15.69KB]
- mj-F.T [13.05KB]
- mj-FCAL.sts [3.68KB]
- mj-FNT.STS [548.00B]
- mj-FSEC.STS [196.00B]
- pk0.pk [2.24KB]
- PK1.PK [15.99KB]
- pk11.out [79.67KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STS0.PK [2.24KB]
- Stscpj.out [650.00B]
- pk-G_
- JCdata.out [47.47KB]
- KLM.T [41.01KB]
- MemberInfo.out [3.43KB]
- mj-G.JCN [1.96KB]
- mj-G.JH [137.54KB]
- mj-G.STS [35.26KB]
- mj-G.T [13.77KB]
- mj-GCAL.sts [4.83KB]
- mj-GNT.STS [548.00B]
- mj-GSEC.STS [412.00B]
- pk0.pk [3.37KB]
- PK1.PK [35.60KB]
- pk11.out [168.18KB]
- PKDEF.PK [0.00B]
- PKn.PK [5.29KB]
- STS0.PK [3.37KB]
- Stscpj.out [12.53KB]
- pk-Y0_
- BAK
- mj-Y0-20_12_11_20_42_46.zip
- mj-Y0.JH [241.15KB]
- mj-Y0-20_12_11_20_53_34.zip
- mj-Y0.JH [236.85KB]
- mj-Y0-20_12_11_23_28_30.zip
- mj-Y0.JH [236.85KB]
- CeShiData.txt [1.06MB]
- JCdata.out [50.65KB]
- KLM.T [41.57KB]
- MemberInfo.out [3.43KB]
- mj-Y0.JCN [1.96KB]
- mj-Y0.JH [236.85KB]
- mj-Y0.STS [37.60KB]
- mj-Y0.T [13.96KB]
- mj-Y0CAL.sts [4.83KB]
- mj-Y0NT.STS [1.01KB]
- mj-Y0pkmodel.mll [684.00B]
- mj-Y0SEC.STS [412.00B]
- pk0.pk [3.74KB]
- PK1.PK [37.94KB]
- pk11.out [178.35KB]
- PKDEF.PK [0.00B]
- PKn.PK [5.29KB]
- STIFMJ.PK [204.00B]
- STS0.PK [3.74KB]
- Stscpj.out [7.09KB]
- pk-Y12000_
- BAK
- mj-Y12000-20_12_11_20_53_37.zip
- mj-Y12000.JH [222.41KB]
- mj-Y12000-20_12_11_23_28_33.zip
- mj-Y12000.JH [222.48KB]
- CeShiData.txt [479.70KB]
- JCdata.out [100.55KB]
- KLM.T [44.73KB]
- MemberInfo.out [2.31KB]
- mj-Y12000.JCN [1.96KB]
- mj-Y12000.JH [222.48KB]
- mj-Y12000.STS [16.93KB]
- mj-Y12000.T [13.14KB]
- mj-Y12000CAL.sts [3.68KB]
- mj-Y12000NT.STS [1.01KB]
- mj-Y12000SEC.STS [268.00B]
- pk0.pk [2.57KB]
- PK1.PK [17.05KB]
- pk11.out [90.86KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STIFMJ.PK [204.00B]
- STS0.PK [2.57KB]
- Stscpj.out [655.00B]
- pk-Y18000_
- BAK
- mj-Y18000-20_12_11_20_53_38.zip
- mj-Y18000.JH [232.59KB]
- mj-Y18000-20_12_11_23_28_34.zip
- mj-Y18000.JH [232.52KB]
- mj-Y18000-20_12_11_23_28_35.zip
- mj-Y18000.JH [232.52KB]
- CeShiData.txt [915.80KB]
- JCdata.out [55.03KB]
- KLM.T [40.55KB]
- MemberInfo.out [3.01KB]
- mj-Y18000.JCN [1.96KB]
- mj-Y18000.JH [232.52KB]
- mj-Y18000.STS [31.40KB]
- mj-Y18000.T [13.73KB]
- mj-Y18000CAL.sts [4.50KB]
- mj-Y18000NT.STS [1.01KB]
- mj-Y18000SEC.STS [268.00B]
- pk0.pk [3.25KB]
- PK1.PK [31.93KB]
- pk11.out [156.40KB]
- PKDEF.PK [0.00B]
- PKn.PK [4.45KB]
- STIFMJ.PK [204.00B]
- STS0.PK [3.25KB]
- Stscpj.out [7.98KB]
- pk-Y24000_
- BAK
- mj-Y24000-20_12_11_20_53_40.zip
- mj-Y24000.JH [222.41KB]
- mj-Y24000-20_12_11_23_28_36.zip
- mj-Y24000.JH [222.48KB]
- CeShiData.txt [479.70KB]
- JCdata.out [100.55KB]
- KLM.T [44.73KB]
- MemberInfo.out [2.31KB]
- mj-Y24000.JCN [1.96KB]
- mj-Y24000.JH [222.48KB]
- mj-Y24000.STS [16.93KB]
- mj-Y24000.T [13.14KB]
- mj-Y24000CAL.sts [3.68KB]
- mj-Y24000NT.STS [1.01KB]
- mj-Y24000SEC.STS [268.00B]
- pk0.pk [2.57KB]
- PK1.PK [17.05KB]
- pk11.out [90.86KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STIFMJ.PK [204.00B]
- STS0.PK [2.57KB]
- Stscpj.out [655.00B]
- pk-Y30000_
- BAK
- mj-Y30000-20_12_11_20_53_41.zip
- mj-Y30000.JH [222.41KB]
- mj-Y30000-20_12_11_23_28_38.zip
- mj-Y30000.JH [222.48KB]
- CeShiData.txt [479.70KB]
- JCdata.out [100.55KB]
- KLM.T [44.73KB]
- MemberInfo.out [2.31KB]
- mj-Y30000.JCN [1.96KB]
- mj-Y30000.JH [222.48KB]
- mj-Y30000.STS [16.93KB]
- mj-Y30000.T [13.14KB]
- mj-Y30000CAL.sts [3.68KB]
- mj-Y30000NT.STS [1.01KB]
- mj-Y30000SEC.STS [268.00B]
- pk0.pk [2.57KB]
- PK1.PK [17.05KB]
- pk11.out [90.86KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STIFMJ.PK [204.00B]
- STS0.PK [2.57KB]
- Stscpj.out [655.00B]
- pk-Y36000_
- BAK
- mj-Y36000-20_12_11_20_53_43.zip
- mj-Y36000.JH [236.85KB]
- mj-Y36000-20_12_11_23_28_39.zip
- mj-Y36000.JH [236.85KB]
- CeShiData.txt [1.06MB]
- JCdata.out [50.65KB]
- KLM.T [41.57KB]
- MemberInfo.out [3.43KB]
- mj-Y36000.JCN [1.96KB]
- mj-Y36000.JH [236.85KB]
- mj-Y36000.STS [37.60KB]
- mj-Y36000.T [13.96KB]
- mj-Y36000CAL.sts [4.83KB]
- mj-Y36000NT.STS [1.01KB]
- mj-Y36000SEC.STS [412.00B]
- pk0.pk [3.74KB]
- PK1.PK [37.94KB]
- pk11.out [178.35KB]
- PKDEF.PK [0.00B]
- PKn.PK [5.29KB]
- STIFMJ.PK [204.00B]
- STS0.PK [3.74KB]
- Stscpj.out [7.09KB]
- pk-Y6000_
- BAK
- mj-Y6000-20_12_11_20_53_35.zip
- mj-Y6000.JH [222.41KB]
- mj-Y6000-20_12_11_23_28_31.zip
- mj-Y6000.JH [222.48KB]
- mj-Y6000-20_12_11_23_28_32.zip
- mj-Y6000.JH [222.48KB]
- CeShiData.txt [479.70KB]
- JCdata.out [100.55KB]
- KLM.T [44.73KB]
- MemberInfo.out [2.31KB]
- mj-Y6000.JCN [1.96KB]
- mj-Y6000.JH [222.48KB]
- mj-Y6000.STS [16.93KB]
- mj-Y6000.T [13.14KB]
- mj-Y6000CAL.sts [3.68KB]
- mj-Y6000NT.STS [1.01KB]
- mj-Y6000SEC.STS [268.00B]
- pk0.pk [2.57KB]
- PK1.PK [17.05KB]
- pk11.out [90.86KB]
- PKDEF.PK [0.00B]
- PKn.PK [1.82KB]
- STIFMJ.PK [204.00B]
- STS0.PK [2.57KB]
- Stscpj.out [654.00B]
- RB-1_
- BAK
- RB-1-20_12_11_20_53_26.zip
- RB-1.JH [244.86KB]
- RB-1-20_12_11_23_28_21.zip
- RB-1.JH [244.86KB]
- CeShiData.txt [1.03MB]
- JCdata.out [7.76KB]
- KLM.T [35.98KB]
- MemberInfo.out [4.30KB]
- pk0.pk [4.51KB]
- PK1.PK [37.55KB]
- pk11.out [173.05KB]
- PKDEF.PK [0.00B]
- PKn.PK [5.43KB]
- RB-1.JCN [384.00B]
- RB-1.JH [244.86KB]
- RB-1.STS [37.57KB]
- RB-1.T [14.33KB]
- RB-1CAL.sts [5.25KB]
- RB-1NT.STS [860.00B]
- RB-1SEC.STS [700.00B]
- STIFMJ.PK [204.00B]
- STS0.PK [4.51KB]
- Stscpj.out [15.06KB]
- RB-2_
- BAK
- RB-2-20_12_11_20_53_28.zip
- RB-2.JH [244.86KB]
- RB-2-20_12_11_23_28_23.zip
- RB-2.JH [244.86KB]
- CeShiData.txt [1.03MB]
- JCdata.out [7.76KB]
- KLM.T [35.98KB]
- MemberInfo.out [4.30KB]
- pk0.pk [4.55KB]
- PK1.PK [37.55KB]
- pk11.out [173.28KB]
- PKDEF.PK [0.00B]
- PKn.PK [5.43KB]
- RB-2.JCN [384.00B]
- RB-2.JH [244.86KB]
- RB-2.STS [37.57KB]
- RB-2.T [14.33KB]
- RB-2CAL.sts [5.25KB]
- RB-2NT.STS [860.00B]
- RB-2SEC.STS [700.00B]
- STIFMJ.PK [204.00B]
- STS0.PK [4.55KB]
- Stscpj.out [15.30KB]
- 刚架施工详图
- 10轴线刚架施工详图.t [572.67KB]
- 11轴线刚架施工详图.t [561.24KB]
- 1轴线刚架施工详图.t [562.04KB]
- 2轴线刚架施工详图.t [572.66KB]
- 3轴线刚架施工详图.t [533.45KB]
- 4轴线刚架施工详图.t [533.45KB]
- 5轴线刚架施工详图.t [533.45KB]
- 6轴线刚架施工详图.t [533.45KB]
- 7轴线刚架施工详图.t [533.45KB]
- 8轴线刚架施工详图.t [533.45KB]
- 9轴线刚架施工详图.t [533.45KB]
- 图纸目录.t [68.73KB]
- 柱脚锚栓布置图.t [174.92KB]
- 设计总说明.t [72.38KB]
- 屋面墙面构件详图
- 11轴线-墙梁墙柱拉条隅撑施工图.t [558.89KB]
- 1轴线-墙梁墙柱拉条隅撑施工图.t [558.89KB]
- A轴线-墙梁墙柱拉条隅撑施工图.t [741.95KB]
- A轴线-柱间支撑施工图.t [69.11KB]
- G轴线-墙梁墙柱拉条隅撑施工图.t [735.70KB]
- G轴线-柱间支撑施工图.t [69.11KB]
- 抗风柱施工图.t [204.01KB]
- 第1标准层-屋面支撑系杆施工图.t [94.41KB]
- 第1标准层-檩条拉条隅撑施工图.T [621.22KB]
- 施工图
- 10轴线刚架施工详图.Dwg [372.88KB]
- 10轴线刚架施工详图.t [698.75KB]
- 11轴线-墙梁墙柱拉条隅撑施工图.Dwg [259.28KB]
- 11轴线-墙梁墙柱拉条隅撑施工图.t [452.36KB]
- 11轴线刚架施工详图.Dwg [316.00KB]
- 11轴线刚架施工详图.t [586.18KB]
- 1轴线-墙梁墙柱拉条隅撑施工图.Dwg [259.03KB]
- 1轴线-墙梁墙柱拉条隅撑施工图.t [452.36KB]
- 1轴线刚架施工详图.Dwg [283.88KB]
- 1轴线刚架施工详图.t [523.02KB]
- 2轴线刚架施工详图.Dwg [353.91KB]
- 2轴线刚架施工详图.t [658.70KB]
- 3轴线刚架施工详图.Dwg [344.91KB]
- 3轴线刚架施工详图.t [667.39KB]
- 4轴线刚架施工详图.Dwg [344.91KB]
- 4轴线刚架施工详图.t [667.39KB]
- 5轴线刚架施工详图.Dwg [344.91KB]
- 5轴线刚架施工详图.t [667.39KB]
- 6轴线刚架施工详图.Dwg [344.91KB]
- 6轴线刚架施工详图.t [667.39KB]
- 7轴线刚架施工详图.Dwg [344.91KB]
- 7轴线刚架施工详图.t [667.39KB]
- 8轴线刚架施工详图.Dwg [344.91KB]
- 8轴线刚架施工详图.t [667.39KB]
- 9轴线刚架施工详图.Dwg [344.91KB]
- 9轴线刚架施工详图.t [667.39KB]
- A轴线-墙梁墙柱拉条隅撑施工图.Dwg [378.84KB]
- A轴线-墙梁墙柱拉条隅撑施工图.t [677.26KB]
- A轴线-柱间支撑施工图.Dwg [46.19KB]
- A轴线-柱间支撑施工图.t [67.33KB]
- build-pm.sts [11.00B]
- build.BWS [308.26KB]
build.BWT [308.26KB]- build.dat [28.04KB]
- build.JWS [579.09KB]
- build.mdb [1.96MB]
build_10140670.bak [579.09KB]- build_10150012.bak [308.21KB]
- CLDAT.PM [0.00B]
- GjWei.STS [956.00B]
- G轴线-墙梁墙柱拉条隅撑施工图.Dwg [384.59KB]
- G轴线-墙梁墙柱拉条隅撑施工图.t [687.52KB]
- G轴线-柱间支撑施工图.Dwg [46.19KB]
- G轴线-柱间支撑施工图.t [67.33KB]
- MSG.PM [72.00B]
- 图纸目录.Dwg [40.97KB]
- 图纸目录.t [56.82KB]
- 屋面墙面布置图-1.T [0.00B]
- 抗风柱施工图.Dwg [63.91KB]
- 抗风柱施工图.t [102.31KB]
- 柱脚锚栓布置图.Dwg [71.38KB]
- 柱脚锚栓布置图.t [192.24KB]
- 第1标准层-屋面支撑系杆施工图.Dwg [52.44KB]
- 第1标准层-屋面支撑系杆施工图.t [77.05KB]
- 第1标准层-檩条拉条隅撑施工图.Dwg [315.06KB]
- 第1标准层-檩条拉条隅撑施工图.t [543.27KB]
- 设计总说明.Dwg [42.47KB]
- 设计总说明.t [72.38KB]
- 1 [1.47KB]
- 1轴线刚架施工详图.t [549.90KB]
- 3DQLData.sts [9.11KB]
- AAA.T [133.52KB]
- AS.T [25.23KB]
- AutoDrawAllGjt.sts [1.04KB]
- AutoDrawGjt.sts [384.00B]
- AutoDrawPara_ALL.dat [5.76KB]
- AutoDrawWQGjt.sts [352.00B]
- AutoDrawWQPara.dat [1.76KB]
- AutoFormDHBFileName.sts [573.00B]
- build-pm.sts [11.00B]
- build.BWS [123.06KB]
- build.dat [28.04KB]
- build.JWS [123.06KB]
- build.mdb [1.96MB]
- build.t [5.13MB]
- buildmdb.sts [82.76KB]
- buildZip.sts [701.79KB]
- build_10140670.bak [81.57KB]
- build_10150012.bak [62.60KB]
- build_bak.mdb [28.51MB]
- cengnum.txt [3.00B]
- CeShiData.txt [3.20KB]
- checkResult.txt [6.16KB]
- CLDAT.PM [0.00B]
- cmdMngr.log [1.74KB]
- dhb.t [68.68KB]
- GjWei.STS [956.00B]
- KFZ.out [5.80KB]
KFZ1.skf [313.00B]- KFZ4.skf [313.00B]
- KFZ_Def.t [21.36KB]
- KFZ_F1.t [21.45KB]
- KFZ_Strength.t [19.58KB]
- KLM.T [25.04KB]
- LT.OUT [4.49KB]
- LT11 [440.00B]
- LT7 [440.00B]
- LtOpt.OUT [196.00B]
- ltqlcal.sts [684.00B]
- Mj2DDraw.dat [840.00B]
- MJ3DINFRO.MLL [9.35KB]
- mj3dToJC.STS [41.38KB]
- N.T [23.31KB]
- OutPutInfo.txt [591.00B]
- PK0.PK [1.87KB]
- pkmodel.mll [684.00B]
- PROGINFO.STS [284.00B]
- QlOpt.OUT [189.00B]
- SC1.txt [296.00B]
- SC2.txt [296.00B]
- SC3.txt [296.00B]
- STS0.PK [1.87KB]
- stsLinkPara.pm [3.24KB]
- TEST_PDB_IO.OUT [11.60KB]
- UpdateUserLib.log [0.00B]
- WHGjMatData.STS [13.58KB]
- WYC3.txt [240.00B]
- yucheng1.txt [796.00B]
- ZC.OUT [1.47KB]
- ZC1.JH [215.94KB]
- ZC1.out [9.22KB]
- ZC1.T [12.04KB]
- ZC1.txt [772.00B]
- ZC2.JH [215.94KB]
- ZC2.out [9.22KB]
- ZC2.T [12.04KB]
- ZC2.txt [772.00B]
- zlmCalLoad.txt [3.82KB]
- 图纸目录.t [56.82KB]
- 屋面墙面布置图-1.T [72.00B]
- 第7章案例3
- 12_模型数据备份
- 7层框架.JWS [122.32KB]
- 7层框架 [72.49KB]
- 7层框架.01S [125.76KB]
- 7层框架.02S [151.11KB]
- 7层框架.03S [231.75KB]
- 7层框架.04S [231.75KB]
- 7层框架.05S [229.85KB]
- 7层框架.06S [230.14KB]
- 7层框架.1WS [122.59KB]
- 7层框架.2WS [122.32KB]
- 7层框架.3WS [132.80KB]
- 7层框架.4WS [132.76KB]
- 7层框架.5WS [132.60KB]
- 7层框架.6WS [132.00KB]
- 7层框架.7WS [132.00KB]
- 7层框架.8WS [131.99KB]
- 7层框架.9WS [122.54KB]
7层框架.BUD [0.00B]- 7层框架.BWS [229.67KB]
- 7层框架.JWS [229.67KB]
- 7层框架.mdb [27.73MB]
- 7层框架.sqlite [408.00KB]
- 7层框架.T [22.18KB]
- 7层框架ZHLG.PM [1.63KB]
- CASESINFO.PM [9.40KB]
- CHECKSAT.SPS [563.23KB]
- DATW.pm [21.09KB]
- DBS_SATWE_7层框架_MODEL0_HOLO.PDB [142.53KB]
- DBS_SYSTEM_CONSOLE_INFORMATION.PDB [1.99KB]
- Envelope_Parameter.pm [55.00B]
- Envelope_Parameter_UserDefined.pm [1.39KB]
- jdaboveflr.pm [1.70KB]
- layadjdata.pm [15.69KB]
- pm3j_2jc.pm [1.56KB]
- pm3j_perflr.pm [6.71KB]
- pm3j_perflr_hori.pm [228.00B]
- PMSLABBARDB.PM [745.00B]
- PMSLABLLC.PM [151.00B]
- PMSLABPARA.PM [3.91KB]
- SatconcPara.pm [427.00B]
- SATFDK.OUT [61.07KB]
- SATFDK.SAT [18.95KB]
- SATFIREMATERIAL.PM [790.00B]
- SATINPUTSTRUSYSCOEF.PM [1.18KB]
- SATREINFORCE_PARA_BY_KST.PM [1.60KB]
- SATREINFORCE_PARA_BY_LAYER.PM [1.94KB]
- SATWE_7层框架_MODEL0_HOLO.PDB [29.69MB]
- SAT_ADD_COEF.PM [84.55KB]
- SAT_ADD_ZFLAG.PM [19.11KB]
- SAT_AIRLOAD.PM [12.00B]
- SAT_BDD.PM [13.96KB]
- SAT_BEMRM.PM [5.22KB]
- SAT_COEF.PM [216.26KB]
- SAT_DEF.PM [1.64KB]
- SAT_DEF_NEW.PM [781.33KB]
- SAT_INFO_ADD.PM [40.00B]
- SAT_JGGJXX.PM [58.71KB]
- SAT_QTPAR.PM [1.41KB]
- SAT_SGCXC.PM [32.00B]
- sat_submodel.pm [17.00B]
- SAT_TOW.PM [724.00B]
- SAT_TOW_PARA.PM [24.63KB]
- SAT_TOW_PARA2.PM [3.54KB]
- SAT_TOW_T.PM [2.72KB]
- SPAS_ZHL.PM [28.00B]
- stsLinkPara.pm [3.24KB]
- SYSTEM_CONSOLE_INFORMATION.PDB [32.00KB]
- TATDA1.PM [4.44KB]
- TAT_B-C.PM [36.23KB]
- TAT_BIN.PM [765.61KB]
- TAT_D-T.PM [112.00B]
- TAT_DEFENCE_LOAD.PM [28.00B]
- WBM_Kind.pm [16.00B]
- WDCNL.SAT [113.74KB]
- WINDHOLE.PM [980.00B]
- WORK.FNM [284.00B]
- ZHIZUO.PM [0.00B]
第1章.pptx [322.45KB]- 第2章.pptx [1.89MB]
- 第3章.pptx [1.33MB]
- 第4章.pptx [1.95MB]
第5章.ppt [2.88MB]- 第6章.ppt [1.09MB]
- 第7章.ppt [2.12MB]
下载地址
- [ 《PKPM结构软件应用与设计实例》(张同伟)电子课件(附案例模型源文件)下载 ] （需要: 30 个学海币） 如何赚学海币
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开？
A: 本站所有资源如无特殊说明，解压密码都是www.xuehai.net，如果无法解压，请下载最新的WinRAR软件。
Q: 我的学海币不多了，如何获取学海币？
A: 上传优质资源可以获取学海币，详细见学海币规则。
Q: 为什么我下载不了,但学海币却被扣了？
A: 由于下载人数众多，下载服务器做了并发的限制。请稍后再试，48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台，并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
Q: 为什么我下载的文件打不开？
A: 本站所有资源如无特殊说明，解压密码都是www.xuehai.net，如果无法解压，请下载最新的WinRAR软件。
Q: 我的学海币不多了，如何获取学海币？
A: 上传优质资源可以获取学海币，详细见学海币规则。
Q: 为什么我下载不了,但学海币却被扣了？
A: 由于下载人数众多，下载服务器做了并发的限制。请稍后再试，48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台，并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
