您现在正在浏览:首页 > 论文 > 电子电工 > 毕业设计-视觉伺服技术研究

免费下载毕业设计-视觉伺服技术研究

  • 资源类别:论文
  • 资源分类:电子电工
  • 适用专业:自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+ppt
  • 文件大小:1.61MB
  • 上传时间:2014-7-21 1:22:01
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-视觉伺服技术研究,共45页,18502字,附外文翻译、答辩PPT
摘 要
机器人视觉赋予机器人系统以人类视觉功能,并感知外部世界,有效解决人类所能解决的问题,是智能机器人系统的关键技术,也是机器人科学研究中面临的巨大挑战之一。由于视觉传感器可非接触方式、大信息量采集环境信息,机器人视觉的发展和研究不仅大大推进了机器人系统的智能性,也拓宽了机器人智能传感和控制系统的研究范围和应用领域。
目前,机器人视觉伺服系统根据视觉反馈信号表示的是3D空间坐标值或是图像特征值而分为基于位置的(position-based)和基于图像的(image-based)视觉闭环反馈两种方式。基于位置的控制方式根据已知的目标几何模型和摄像机模型来估计目标相对于摄像机的位姿,其主要缺陷在于控制精度依赖于摄像机的标定精度,而标定精度又受环境的制约。基于图像的控制方式误差信号直接用图像特征来定义,直接利用图像特征进行视觉信息反馈伺服控制。该方法可以减少计算延时,并且对摄像机和机械臂的校准误差和目标模裂误差具有较强的鲁棒性。其主要缺点有两点:1)为了求得图像特征参数的变化同机器人位姿变化的关系,图像的视觉伺服方法必需计算图像雅可比矩阵J(Image Jacobian Matrix)及其逆矩阵。但是,图像雅可比矩阵通常与机械手到图像平面的垂直距离(也称为深度)有关,对于单目视觉伺服系统,深度信息的精确估计是比较困难的。许多文献采用固定雅克比矩阵的方法实现机器人视觉伺服,但是这种方法只能在局部任务空间有效。2)跟踪过程中图像雅克比矩阵可能存在奇异性问题,导致系统不稳定。
针对基于图像的机器人视觉伺服控制算法的研究,首先研究了基于目标物体点特征、复杂图像特征的视觉伺服控制算法图像雅可比矩阵J,的计算方法;接着,建立了本文机器人视觉系统平台上,基于图像的机器人视觉伺服控制算法模型,实现了基于复杂图像特征的机器人视觉伺服控制算法仿真实验,并以实验验证了算法的有效性,为结构环境中的目标物体位姿跟踪找到了一种基于图像的机器人视觉伺服控制算法解决途径。
针对基于图像的机器人视觉伺服控制算法中图像特征组选择的重要性,研究了基于全局图像性能指标GPI的图像特征组性能评价标准和选择方法,摆脱了以往图像特征组选择的主观性,提供了一种有效且可行的判断依据。文中还推导了全局图像性能指标理论计算方法;针对全局图像性能指标理论计算复杂性,作者还研究了一种简单、实用的估算方法。最后,以仿真实验验证了本文研究的主要内容。
关键词:机器人视觉,视觉伺服控制方法,图像雅可比矩阵,图像特征性能评价

ABSTRACT
Robot vision,which gives robot system functions of perceiving world outside as human vision and makes the robot system solve problems effectively like human being,is the key technology of intelligent robot system and one of great challenges to robot research.As vision sensors can get mass information of outside through untouchable way ,researching and developing of robot vision system will not only improve the intelligence of robot system,but also extend the study and application field of robot intelligent sensor and control system.
One major classification of robot visual servoing system distinguishes position—based control form image—based control based on the error signal is defined in 3D coordinates or directly in terms of image features.In position—based control,features are extracted from image and used in conjunction with a geometric model of the target and the know camera model to estimate the pose of the target with respect to tile camera The primary disadvantage of position—based control is that it is often highly calibration dependent The impact of calibration dependency often depends on the situation In image。based servoing,control values are computed on the basis of image features(F)directly.the image—based approach may reduce computational delay ,eliminate the necessity for image interpretation and eliminate errors due to sensor modeling and camera calibration However ,there are two main disadvantages to image—based visual serving:1)It is necessary to relate differential changes in the image feature parameters to differential changes in position of the manipulator.So it is necessary to compute inverse feature Jacobian(J).However ,the feature Jacobian is the function of the distance from the camera focal center to the point being imaged.For an eye—in—hand system,determining the distance is very difficult Many reports are based on using a constant image Jacobian ,which is computationally efficient,but valid only over a small region of the task space.2)The disadvantage is presence of singularities in the feature mapping function ,which reflect themselves as unstable points in the inverse Jacobian control law.
On researching of image based robot visual servoing,firstly , the calculation of Image Jacobean Matrix Ji based 0n simple image features and complex features are proposed independently.Image based robot visual servoing algorithm in textual robot vision system,which realizes visual tracking experiment system based on robot visual servoing on complex image features.is presented.And efficiency of the algorithm is proved by experiments.
As for the importance of image features selection in image based robot visual servoing system,an estimation standard and selection method of image features based on global image performance index is presented,which provides US a efficient and feasible way for subjectivity of image features selection.Moreover , the theory calculation method of global performance index is proposed;and for heavy calculation of global performance index in theory way ,a simple and applied estimate method of GPI is presented.At last,effectiveness of image features selection method is proved by experiments.
KEY WORDS:robot vision ,robot visual servoing ,image jacobean matrix , image performance estimation

目 录
第一章 绪论 - 1 -
1.1课题研究背景及意义 - 1 -
1.2机器人视觉伺服系统 - 1 -
1.2.1 机器人视觉伺服研究进展 - 1 -
1.2.2 机器人视觉控制系统分类 - 3 -
1.2.3视觉伺服在主要领域的应用 - 5 -
第二章 视觉伺服中的图像处理与相机模型 - 7 -
2.1引言 - 7 -
2.2 光标设计 - 7 -
2.3图像滤波 - 8 -
2.4图像分割 - 9 -
2.5形态学运算 - 10 -
2.6图像特征的提取 - 10 -
2.6.1 重心法 - 10 -
2.6.2 特征提取举例 - 11 -
2.7摄像机模型 - 12 -
2.7.1 针孔模型 - 12 -
2.7.2摄像机的相机内外参数 - 13 -
2.7.3 坐标变换 - 15 -
2.8 本章小结 - 16 -
第三章 基于图像的视觉伺服控制方法研究 - 17 -
3.1引言 - 17 -
3.2基本坐标定义 - 17 -
3.3机器人运动学基本方程 - 18 -
3.4图像雅可比矩阵 - 20 -
3.5视觉伺服算法流程 - 22 -
3.5.1 算法流程 - 22 -
3.5.2 末端速度规划 - 23 -
3.5.3 关节运动轨迹规划 - 24 -
3.5.4 关节控制 - 25 -
3.6 本章小结 - 25 -
第四章 图像反馈机器人伺服系统仿真 - 26 -
4.1基于图像的机器人视觉伺服 - 26 -
4.2机器人参数 - 28 -
4.3仿真实验 - 30 -
4.4 Labview实例仿真 - 30 -
总 结 - 32 -
致 谢 - 33 -
参考文献 - 34 -
毕业设计小结 - 36 -

资料文件预览
共2文件夹,3个文件,文件总大小:6.42MB,压缩后大小:1.61MB
  • 毕业设计-视觉伺服技术研究
    • 魏荧鑫
      • Microsoft Word文档英文文献翻译.doc  [92.50KB]
      • Microsoft Powerpoint演示文稿视觉伺服技术研究.ppt  [757.50KB]
      • Microsoft Word文档论文.doc  [5.59MB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部