您现在正在浏览:首页 > 论文 > 电子电工 > 毕业设计-基于DSP的BLDCM控制系统的硬件设计

免费下载毕业设计-基于DSP的BLDCM控制系统的硬件设计

  • 资源类别:论文
  • 资源分类:电子电工
  • 适用专业:电气工程及其自动化
  • 适用年级:大学
  • 上传用户:haobi
  • 文件格式:word
  • 文件大小:1.18MB
  • 上传时间:2011-6-13 2:04:30
  • 下载次数:2
  • 浏览次数:54

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
毕业设计-基于DSP的BLDCM控制系统的硬件设计,共34页,12963字
相关设计参考:毕业设计-基于DSP的BLDCM控制系统的软件设计

摘 要
无刷直流电动机是近年来随着电子技术的迅速发展而发展起来的一种新型电动机,是以法拉第的电磁感应定律为基础,又以新兴的电子技术、数字技术和各种物理原理为后盾,具有很强的生命力。同时,它克服了传统电机的一些弊端,渐渐成为现代工业设备、现代科学技术和军事装备中重要的机电元件之一。
本文以无刷直流电机控制器硬件部分的设计为中心,介绍了无刷直流电机的国内外研究现状、研究意义、基本结构、系统构成。围绕着无刷直流电机控制系统几个关键技术——驱动电路、启动和控制方法,对无刷直流电机控制器进行全面的分析。控制器采用霍尔信号进行位置检测,选用IR公司的IR2103芯片作为驱动芯片,通过全桥驱动和两两导通的方式,对6个MOSFET功率开关进行控制,以达到对电机的启停、速度控制。
本文描述了硬件电路的各部分原理和功能,阐述了调试过程以及实验结果。通过最终的测试,控制器实现了对无刷直流电机的启动、调速、制动、停车控制,并有过压、限流保护功能。测试表明,圆满的完成了无刷直流控制器的设计。
关键字:无刷直流电动机 驱动电路 位置检测 MOSFET功率开关
Abstract
Brushless direct current motor is one kind of new electric motor in recent years which is developed along with the rapid development of electronic technology, was taking the Faraday's law of electromagnetic induction as the foundation, and the emerging electronic technology, the digital technique and of sorts physical principles as the backing, so it has strong vitality. At the same time, it has overcame some disadvantages of traditional electrical machinery, became one of important electromechanical components in the industrial equipment、the modern science technology and the military equipment gradually.
This article takes brushless DC motor controller hardware part as a center, domestic and foreign research present situation, its significance , the basic structure and system constitution are introduced. Around the brushless DC motor control systems of several key technologies -- driver circuit, start-up and control method, the brushless direct current motor controller is comprehensively analyzed. In order to control the motor's start-stop and speed, controller uses Hall position detection signal, selectes IR's IR2103 chip as the driver chip, controls 6 MOSFET power switches through the entire bridge actuation and 22 turn-on 's way.
This paper describes the hardware circuit principle and function of each parts, also the debugging and the experiment results. Through the final test, the controller realized to has brushless direct current motor 's start, the velocity modulation, the brake, the parking control, and has had the protection functions of pressure and the current limiting. The testing indicated that the brushless DC motor controller was completed perfectly.
Key words: brushless direct current motor driver circuit Controller MOSFET power switch
目 录
摘要………………………………………………………………………………………Ⅰ
Abstract…………………………………………………………………………………Ⅱ
绪论…………………………………………………………………………………………1
1 芯片介绍及系统介绍………………………………………………………………4
1.1系统介绍……………………………………………………………………………4
1.1.1 BLDC电机基本知识………………………………………………………………5
1.1.2 有位置传感器的BLCD电机控制………………………………………………5
1.1.3 硬件描述…………………………………………………………………………5
1.1.4 功率驱动方式……………………………………………………………………5
1.2 芯片介绍……………………………………………………………………………6
1.2.1 dsPIC30F2010……………………………………………………………………6
1.2.2 IR2103……………………………………………………………………………7
1.2.3 IRF840 MOSFET…………………………………………………………………7
2 无刷直流电机控制系统硬件设计…………………………………………………8
2.1 系统总体构成………………………………………………………………………8
2.2 系统框图……………………………………………………………………………8
2.3 硬件部分设计………………………………………………………………………9
2.3.1 系统原理…………………………………………………………………………9
2.3.2 驱动部分…………………………………………………………………………9
2.3.3 采样电路…………………………………………………………………………10
2.3.4 电源电路…………………………………………………………………………11
2.3.5 DSP控制引脚功能………………………………………………………………13
3 无刷直流电机控制系统的软件设计………………………………………………14
3.1 主程序…………………………………………………………………………14
3.2 中断服务程序…………………………………………………………………16
3.2.1 捕获中断服务程序………………………………………………………………16
3.2.2 INT2核心中断服务程序………………………………………………………16
3.2.3 定时器比较中断服务程序……………………………………………………18
4 调试过程及实验结果…………………………………………………………………21
4.1 调试过程……………………………………………………………………………21
4.2 实物图………………………………………………………………………………21
4.3 实验结果与分析……………………………………………………………………21
4.3.1 实验结果…………………………………………………………………………21
结论………………………………………………………………………………………23
致谢………………………………………………………………………………………24
参考文献…………………………………………………………………………………25
附录一 原理图…………………………………………………………………………26
资料文件预览
共1文件夹,1个文件,文件总大小:1.35MB,压缩后大小:1.18MB
  • 毕业设计-基于DSP的BLDCM控制系统的硬件设计
    • Microsoft Word文档毕业设计-基于DSP的BLDCM控制系统的硬件设计.doc  [1.35MB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部