您现在正在浏览:首页 > 论文 > 机械机电 > 硕士论文-热轧带钢精轧机工作辊热变形行为的研究

免费下载硕士论文-热轧带钢精轧机工作辊热变形行为的研究

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:材料加工工程
  • 适用年级:硕士
  • 上传用户:492832015
  • 文件格式:kdh
  • 文件大小:1.91MB
  • 上传时间:2011-4-13 0:45:57
  • 下载次数:1
  • 浏览次数:81

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
硕士论文-热轧带钢精轧机工作辊热变形行为的研究,共87页
摘 要
随着汽车、轻工、家电和电气制造等行业对板形质量要求的不断提
高,板形已成为热连轧带钢生产中至关重要的一个质量问题。带钢板形
质量的好坏主要与轧制过程中有载辊缝有关,因此通过控制有载辊缝可
以使带钢达到良好的几何精度。控制有载辊缝不仅需要知道轧制力作用
下轧辊受力变形后辊缝中点的开度,而且需要知道辊缝沿板宽方向的分
布情况,这涉及到轧辊的许多方面。工作辊的热变形、工作辊的磨损以
及工作辊的弯曲变形是决定有载辊缝的三个主要因素,其中热变形对辊
缝的影响十分显著。热轧过程中,轧辊中部的热膨胀不仅可以带来超过
300μm 的热凸度,而且轧辊的热变形在整个生产过程中不断变化,造成
了生产过程的不稳定。加之其边界条件的复杂性,很难建立适应各种条
件的通用模型,所以工作辊的热变形计算很难达到令人满意的精度,准
确预报轧辊热变形已成为热轧板形控制技术中的难点。因此对其展开研
究,建立符合实际情况的热变形计算模型,不仅具有理论意义,更具有
实用价值。
本文结合宝钢 1880mm 热轧带钢生产实际,根据传热学理论,在全
面分析轧辊热量传递的基础上,确定了轧辊内热传导系数、空气对流传
热系数、冷却水对流传热系数以及输入轧辊的热量计算方程式。从能量
守恒定律和热传导方程出发,利用通用有限元软件 ANSYS 建立了两种轧
辊二维非稳态温度场的计算模型,包括轧辊中心横截面内温度场模型和
轴对称平面温度场模型,并给出了轧辊热凸度模拟计算流程图。针对热
轧过程复杂、边界条件难以确定的难题,深入宝钢 1880mm 热轧生产现
场进行了大量的测量与试验,主要是工作辊下机后表面温度和热辊形的
跟踪测量。然后根据采集的工艺参数,利用建立的计算模型进行了仿真
分析,并与现场的实测辊温和辊形数据进行比较,优化了模型边界条件
的相关参数,使建立的计算模型满足现场的实际使用要求。
利用建立的计算模型对轧制过程中的温度场和热变形过程进行了模
拟计算,研究了轧制过程中轧辊表面和内部温度场的变化情况,以及一
个单位轧制计划内轧辊总的热凸度和部分热凸度变化规律。并分析了轧
辊材质、带钢宽度、轧制节奏、轧辊转速、冷却系统等参数与热变形之
间的关系及其对带钢板形的影响,得出了有价值的结论,为进一步改进
板形控制数学模型,提高板形精度提供了理论依据。
关键词:热轧,温度场,热凸度,有限元,板形
RESEARCH ON THERMAL DEFORMATION BEHAVIOR OF WORK
ROLL IN FINISHING TRAINS OF HOT STRIP MILL
ABSTRACT
Along with automobile, the light industrial professions, home appliance
and electrical production the unceasing raising that asked for board shape
quality, shape of strip has become a most important quality problem in the
production of hot strip rolling. Strip shape is mainly connected with the
loaded roll gap in the strip production, so it can get strip with high geometry
precision by controlling the roll gap. Roll gap control needs to know not only
how much the center of roll gap changes under rolling pressure, but also the
distribution of roll gap along the width of strip, it involves many factors. The
thermal deformation, wear and elastic deformation of roll are the main three
factors affecting the loaded roll gap control model. Among these, the thermal
deformation of work roll plays significant role on the roll gap, the thermal
expansion of roll in the middle plane may be better than 300μm, and the
thermal deformation is changed continually in the whole rolling process,
which causes the instability in production. And due to the complexity of its
boundary condition, it is a difficulty for strip shape control technology to
predict the roll thermal deformation well and truly during hot rolling.
Therefore, the research on building a model for calculating thermal
deformation has the important value of the theory and practice.
According to heat transfer theory, associated with the practical practice
of 1880mm hot rolling mill in Baosteel, and based on overall analysis to the
roll heat transfer, mathematical equations of the coefficient of heat conduction
in the roll, the coefficient of heat transfer of air and cooling water, quantity of
heat inputting the roll had been deduced. Originated from the energy
conservation law and equations of heat conduction, two roll two-dimension
unsteady state’s temperature fields had been established, including
temperature field model of middle plane of roll and axial symmetry of roll.
And the flow chart for calculating the thermal crown of roll was drawn.
Aimed at the complexity of rolling and boundary condition, a series of
experiments and tests were carried out on the spot of 1880mm hot rolling mill
in Baosteel, including the measurement of surface temperature and thermal
profile of work roll after stop rolling. Based on the rolling technological
parameters, the temperature field and thermal deformation of work roll were
calculated. And the measured data on spot were utilized to test the model to
ensure the model’s validity and feasibility.
After using the model to simulate the temperature field and thermal
deformation in hot rolling process, analyzed the transformation trend of the
temperature at roll surface and center, and studied the development trend of
total thermal crown and partial thermal crown in a rolling unit. Furthermore,
the effect of roll material, width of strip, rolling rhythm, roll velocity, cooling
water system parameters on transformation trend of work roll thermal profile
were studied. This paper has provided improving the mathematical model of
strip shape control and increasing accuracy of strip shape.
Keywords: hot strip rolling, work roll, temperature field, thermal crown,
finite element method, strip shape
目 录
摘 要
ABSTRACT
第一章 绪论...... 1
1.1 热轧带钢板形描述 ....... 1
1.2 工作辊热辊形的概念 ... 1
1.3 轧辊热变形行为在板形控制中的地位......... 2
1.4 国内外热变形的研究现状 ...... 4
1.4.1 解析法......... 4
1.4.2 有限差分法. 6
1.4.3 有限元法.... 10
1.4.4 实验方法.... 12
1.5 课题的研究意义和目的 ........ 12
1.6 主要研究内容 .. 13
第二章 热轧工作辊热变形研究的理论基础..... 15
2.1 传热学的基本定律 ..... 15
1.2.1 傅立叶(J.B. Fourier)定律.......... 15
1.2.2 热传导导热定律.. 16
1.2.3 对流传热的牛顿定律..... 17
2.2 工作辊有限元热分析理论 .... 17
2.3 工作辊热变形的计算理论 .... 22
2.4 本章小结 .......... 24
第三章 热轧工作辊温度场和热变形的有限元模型 .... 25
3.1 热轧工作辊温度场模型的简化 ....... 25
3.2 有限元模型的建立 ..... 26
3.2.1 工作辊中心横截面内温度场模型 ....... 26
3.2.2 轴对称平面温度场模型. 27
3.2.3 工作辊热凸度的计算流程......... 28
3.3 边界条件 .......... 29
3.3.1 工作辊与带钢的接触传热(AB 区域) .. 30
3.3.2 带钢与空气的对流换热(EF、GH 区域)........ 32
3.3.3 挡水板积水的换热(CD、IJ 区域)....... 32
3.3.4 冷却水的强制对流(DE、HI 区域)...... 33
3.3.5 工作辊与支撑辊间的传热(FG 区域) ... 36
3.4 本章小结 .......... 37
第四章 热轧工作辊温度场和热变形的仿真与实验分析 ....... 38
4.1 宝钢 1880MM 热轧精轧机组的模型参数 ... 38
4.1.1 轧制工艺参数...... 39
4.1.2 工作辊物性参数和几何尺寸.... 39
4.2 模型边界条件的优化 . 40
4.3 现场测试方案 .. 41
4.4 工作辊温度场的仿真计算 .... 42
4.4.1 工作辊中心横截面内温度场的计算 ... 42
4.4.2 工作辊轴对称平面温度场计算 44
4.4.3 工作辊热变形仿真计算. 46
4.5 计算结果与实测值的比较分析 ....... 48
4.5.1 辊温实测值与仿真结果的比较. 48
4.5.2 辊形实测值与仿真结果的比较 50
4.6 本章小结 .......... 52
第五章 影响工作辊热变形的主要因素分析....... 53
5.1 轧辊材质对工作辊热变形的影响 ... 53
5.2 轧制工艺参数对轧辊热变形的影响 57
5.2.1 带钢宽度... 57
5.2.2 轧制节奏... 60
5.2.3 轧辊转速... 61
5.3 冷却系统参数对轧辊热变形的影响 62
5.3.1 冷却水流量.......... 62
5.3.2 冷却水压力.......... 64
5.3.3 冷却水温度.......... 65
5.3.4 出入口冷却水流量分配比例.... 66
5.4 本章小结 .......... 68
第六章 结论.. 70
参 考 文 献.... 72
致 谢. 75
攻读硕士学位期间已发表或录用的论文.. 76
资料文件预览
共1文件夹,1个文件,文件总大小:2.05MB,压缩后大小:1.91MB
  • 硕士论文-热轧带钢精轧机工作辊热变形行为的研究
    • kdh热轧带钢精轧机工作辊热变形行为的研究.kdh  [2.05MB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部