您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计(论文) 瓶盖冲压模具设计

免费下载毕业设计(论文) 瓶盖冲压模具设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:模具设计
  • 适用年级:大学
  • 上传用户:第二个华兴
  • 文件格式:word
  • 文件大小:283.34KB
  • 上传时间:2010-3-29 17:01:00
  • 下载次数:2
  • 浏览次数:294

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
毕业设计(论文) 瓶盖冲压模具设计,共42页,26687字。
摘 要
铝质红酒瓶盖在红酒包装中应用广泛,并由于其制作可机械化、大规模,成本低、无污染,可回收利用,多重防伪等特点和功能而倍受欢迎。在未来的酒用瓶盖中,铝质酒瓶盖将仍为主流。红酒铝质瓶盖要有好的密封性,同时能够满足高温蒸煮杀菌等特殊要求,因此铝质瓶盖要具有良好的可靠性并对尺寸偏差有严格的要求,故可采用冲压模具进行生产。采用冲压模具生产红酒铝质瓶盖在国内外均得以推广。综合上述,对铝质瓶盖的冲压模具设计是具有现实意义的。
本文以铝质瓶盖为对象,分析了瓶盖的冲压工艺,并对模具结构进行了设计和计算。首先对工件进行了工艺分析,确定了最佳工艺方案,并进行工艺计算;然后确定了落料、拉深复合模的结构型式和其余各次拉深模具的结构型式并对主要结构零件进行了分析、设计和计算,合理地选择了压力机。最后对落料、拉深模具进行了模具装配说明。
关键词:铝质瓶盖;冲压工艺;模具设计;拉深。

Abstract
The aluminium capsules for red wine are widely used in the red wine packing, and they are more popular because of the functions and features of mechanised and massively production, low cost, no pollusion, recycle and mulriple forgery-proofs.In the future, aluminium capsules will be the mainstream all the same in the field of the consumption of capsules for wine. The aluminium capsules are required to have excellent airproof capability and to meet the demand of high temperature sterilization and other particular ones.Therefore, a good reliability of the aluminium capsules is fully expected and the dimensional deviation is severely limited and required. To summarize, it makes a practical sense to produce the aluminium capsules by stamping process, and this producing method is widely extended home and abroad.
This paper which was based on the research on an aluminium capsule, focused on the analysis for the stamping process, the structure design and the calculation of the aluminium capsule. Firstly, according to the analysis and the calculation of the process, desirable process scheme was determined. Secondly, the blanking and drawing compound tool and the drawing molds for other procedures were analysed, designed and calculated as well as the main structure components.Also,the selection of the appropriate presses are completed. Finally, the illumination of the mold assembly of the blanking and drawing mold was made up.
Key words: Aluminium capsule; Stamping process; Mold design; Drawing.

目录
第一章 绪论 1
1.1本课题的项目背景及研究意义 1
1.2课题研究的理论依据 2
1.2.1冲裁过程 2
1.2.2 拉深过程 3
1.3课题研究的主要内容 3
第二章 冲压工艺分析 4
2.1工艺性分析 4
2.2本题拉深工艺中的关键问题 5
2.2.1起皱及其防止措施 5
2.2.2拉裂及其防止措施 5
2.2.3凸、凹模圆角半径对圆筒件拉深的影响 5
2.2.4拉深系数 6
2.3 本题模具采用设计方案 6
2.4冲模设计的步骤和内容 7
2.5确定冲压工艺方案 8
2.5.1设计毛坯尺寸和形状 8
2.5.2计算各次拉深直径 8
2.5.3确定各次拉深凸、凹模圆角半径 9
2.5.4计算各次拉深高度 9
2.5.5工序图的确定 9
2.5.6确定搭边值和排样 10
2.5.7拉深凸、凹模间隙 12
2.5.8计算各次拉深凸、凹模尺寸 12
2.5.9计算落料凸、凹模刃口尺寸 13
2.6计算各工序冲压力和选择冲压设备 14
2.6.1拉深力计算 14
2.6.2压边力计算 15
2.6.3总冲裁力计算 15
2.6.4初选压力机 16
第三章 各次拉深模具结构和整体设计 18
3.1模具结构型式 18
3.1.1定位方式的选择 18
3.1.2出件和卸料方式的选择 18
3.2确定压力中心 19
3.3工作零件尺寸及结构 19
3.4模具闭合高度的确定及模架的选择 23
3.5选定压力机 25
3.6卸料螺钉 27
3.7螺钉和销钉的选用 27
3.8弹簧的选用 28
3.9固定零件 29
3.10定位零件的设计 29
3.11打料块和打料杆 30
3.12模具总装图的绘制 30
3.13模具的装配 32
第四章 结论与展望 35
第五章 心得与致谢 36
参考文献 38
资料文件预览
共1文件夹,1个文件,文件总大小:978.00KB,压缩后大小:283.34KB
  • 毕业设计(论文) 瓶盖冲压模具设计
    • Microsoft Word文档毕业设计 瓶盖冲压模具设计说明书.doc  [978.00KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部