您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计-机械原理机构分析教具设计

免费下载毕业设计-机械原理机构分析教具设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计制造及其自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+autocad+step
  • 文件大小:4.86MB
  • 上传时间:2015-9-26 16:23:59
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-机械原理机构分析教具设计,共36页,15124字,附有任务书、开题报告、autocad设计图纸、三维图纸、仿真
主要内容包括:
1、 熟悉矢量方程图解法,计算速度、加速度和力的大小。
2、 选定适当的比例尺,确定连杆的尺寸大小。
3、 教具整体设计,整体尺寸的计算。
4、 整体机构的运动分析,并完善设计。
5、 整体受力分析与校验,进行结构尺寸优化。
6、 最终提交:
(1)不少于15000字的设计说明书;
(2)给出三维实体装配及零件文档;
(3)工程图3张,其中1张装配图(A1以上)、2张零件图;
 (4) 装配体虚拟运动仿真及装配爆炸动画。

摘 要
机构,指由两个或两个以上构件通过活动联接形成的构件系统。按组成的各构件间相 对运动的不同,机构可分为平面机构(如平面连杆机构、圆柱齿轮机构等)和空间机 构(如空间连杆机构、蜗轮蜗杆机构等);按运动副类别可分为低副机构(如连杆机 构等)和高副机构(如凸轮机构等);按结构特征可分为连杆机构、齿轮机构、斜面 机构、棘轮机构等;按所转换的运动或力的特征可分为匀速和非匀速转动机构、直线 运动机构、换向机构、间歇运动机构等 ;按功用可分为安全保险机构、联锁机构、擒纵机构等。在运动链中,如果将其中某一构件加以固定而成为机架,则该运动链便成为机构。
机构:是具有确定相对运动的构件组合,它是用来传递运动和力的构件系统,构的用途很普遍,不同的机构有不同的用途,按组成的各构件间相对运动的不同 ,可分为平面机构(如平面连杆机构、圆柱齿轮构等)和空间机构(如空间连杆机构、蜗轮蜗杆机构等);按运动副类别可分为低副机构(如连杆机构等)和高副机构(如凸轮机构等);按结构特征可分为连杆机构、齿轮机构、斜面机构、棘轮机构等;按所转换的运动或力的特征可分为匀速和非匀速转动机构、直线运动机构、换向机构、间歇运动机构等 ;按功用可分为安全保险机构、联锁机构、擒纵机构等。而且表现形式很多。
关键词:机构 支架 传动
Abstract
Common rail fuel electric controlled high-pressure injection system is the development direction of modern diesel fuel injection system, in order to study the reliability, this study gives the design scheme of a high pressure common rail system of reliability test platform. The platform can also platform and components performance test combination, reliability testing of component. Under the premise of ensuring other parts under the first reliable, long time running on the platform components to be measured, then go to the component performance test bench for performance testing to judge the reliability. To set the reliability criterion system according to the common faults of the system components. High pressure common rail system was measured by a high pressure oil pump, high pressure oil pipe, common rail pipe, an oil atomizer. The fuel to the high-pressure pump, through the pump after compression by high-pressure tubing into the common rail pipe, and finally from the injectors to spray. The common faults of high pressure oil pump plunger pair has bad sealing and seizure, bad sealing lead to fuel leakage, will cause the pump plunger pair killed no oil supply, so the rail pressure decreased rapidly, at the same time, the driving torque of the motor will increase rapidly. Rupture of the high-pressure oil pipe will lead directly to a fuel leak, and rail pressure will also decrease rapidly. The fault injector are common injector blockage or leakage, electromagnetic coil aging, these faults will cause the fuel injection quantity is not normal, by comparing the cylinder fuel injection quantity can determine whether the normal work of the fuel injector. The rail pressure stable, each cylinder injection quantity equality, torque is not overrun, no leakage that the system is reliable.
Keywords: Hydraulic pressure finite element analysis
a目 录
摘 要 1
目 录 3
第一章 绪论 5
1.1 机械原理机构介绍 5
1.2机构运用举例 6
1.3 平面连杆机构 11
1.3.1平面连杆机构简介 11
1.3.2平面连杆机构基本问题 12
1.3.3平面连杆机构存在条件 12
1.3.4平面连杆机构基本形式 19
1.3.5平面连杆机构尺寸综合 19
第二章 连杆机构的设计 22
2.1 明确技术要求 22
2.2 执行元件的配置确定及动作顺序 22
2.3 杆件设计计算 23
2.3.1 杆件受力分析 23
2.3.2杆件速度计算 23
2.3.3 机构校核 23
2.6 前景展望 29
第三章 设计中的不足及要注意的问题 30
3.1 设计中的不足之处 30
3.2 使用要注意的问题 30
参考文献 31
设计总结 32

资料文件预览
共5文件夹,47个文件,文件总大小:13.80MB,压缩后大小:4.86MB
  • 毕业设计-机械原理机构分析教具设计
    • 机械原理机构分析教具设计
      • 2D
        • AutoCAD工程图纸文件装配体1.DWG  [177.75KB]
        • dwl装配体1.dwl  [33.00B]
        • dwl2装配体1.dwl2  [186.00B]
        • AutoCAD工程图纸文件零件10.DWG  [76.78KB]
        • AutoCAD工程图纸文件零件11.DWG  [72.31KB]
        • AutoCAD工程图纸文件零件12.DWG  [73.81KB]
        • AutoCAD工程图纸文件零件13.DWG  [79.78KB]
        • AutoCAD工程图纸文件零件14.DWG  [81.03KB]
        • AutoCAD工程图纸文件零件15.DWG  [76.53KB]
        • AutoCAD工程图纸文件零件16.DWG  [75.28KB]
        • AutoCAD工程图纸文件零件17.DWG  [78.03KB]
        • AutoCAD工程图纸文件零件18.DWG  [75.78KB]
        • AutoCAD工程图纸文件零件19.DWG  [77.03KB]
        • AutoCAD工程图纸文件零件1_1.DWG  [77.28KB]
        • dwl零件1_1.dwl  [33.00B]
        • dwl2零件1_1.dwl2  [186.00B]
        • AutoCAD工程图纸文件零件2.DWG  [76.28KB]
        • dwl零件2.dwl  [33.00B]
        • dwl2零件2.dwl2  [186.00B]
        • AutoCAD工程图纸文件零件3.DWG  [81.53KB]
        • dwl零件3.dwl  [33.00B]
        • dwl2零件3.dwl2  [186.00B]
        • AutoCAD工程图纸文件零件4.DWG  [76.03KB]
        • dwl零件4.dwl  [33.00B]
        • dwl2零件4.dwl2  [186.00B]
        • AutoCAD工程图纸文件零件5.DWG  [75.03KB]
        • dwl零件5.dwl  [33.00B]
        • dwl2零件5.dwl2  [186.00B]
        • AutoCAD工程图纸文件零件6.DWG  [85.50KB]
        • dwl零件6.dwl  [33.00B]
        • dwl2零件6.dwl2  [186.00B]
        • AutoCAD工程图纸文件零件7.DWG  [76.78KB]
        • AutoCAD工程图纸文件零件8.DWG  [76.53KB]
        • AutoCAD工程图纸文件零件9.DWG  [85.25KB]
      • 3D
        • step装配体1.STEP  [1.88MB]
      • 仿真
        • AutoCAD工程图纸文件仿真.dwg  [73.41KB]
        • step装配体2.STEP  [343.59KB]
      • Microsoft Word文档~$分析教具设计 论文.doc  [162.00B]
      • Windows临时文件~WRL2138.tmp  [378.50KB]
      • Windows临时文件~WRL3465.tmp  [225.00KB]
      • Microsoft Word文档任务书--二.doc  [285.00KB]
      • Microsoft Word文档机构分析教具设计 论文.doc  [307.50KB]
      • Microsoft Word文档机械原理机构分析教具设计.doc  [3.04MB]
      • step装配体1.STEP  [1.88MB]
      • step装配体1.STEP  [1.88MB]
      • step装配体1.STEP  [1.88MB]
      • Microsoft Word文档设计时间要求表.doc  [36.50KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部