您现在正在浏览:首页 > 论文 > 电子电工 > 毕业设计-PLC在机械手控制系统中的应用

免费下载毕业设计-PLC在机械手控制系统中的应用

  • 资源类别:论文
  • 资源分类:电子电工
  • 适用专业:自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+ppt
  • 文件大小:2.77MB
  • 上传时间:2014-7-22 1:38:35
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-PLC在机械手控制系统中的应用,共44页,16032字,附外文翻译、答辩PPT
摘要
机械手是在自动化生产过程中使用的一种具有抓取和移动工件功能的自动化装置,它是在机械自动化生产过程中发展起来的一种新型装置,在生产过程中起着非常重要的作用。在工业生产和其他领域内,由于工作的需要,人们经常受到高温、腐蚀及有毒气体等因素的危害,增加了工人的劳动强度,甚至于危及生命。自从机械手问世以来,相应的各种难题迎刃而解。机械手能代替人类完成危险、重复、枯燥的工作,减轻人类劳动强度,提高劳动生产力,因此机械手得到了越来越广泛的应用。
在本设计中介绍了国内外机械手研究现状及PLC的研究发展趋势,描述了机械手控制系统的工作原理和动作实现过程。研究了基于PLC的机械手模型控制系统的设计并编写了梯形图程序,还研究了组态王在机械手控制系统中的应用。利用组态王软件设计了机械手模型控制系统监控界面,提供了较为直观、清晰、准确的机械手运行状态,进而为维修和故障诊断提供了多方面的可能性,充分提高了系统的工作效率。
关键词:PLC,机械手,组态王

ABSTRACT
Manipulator is in automatic production process use a crawled and mobile workpiece function of automatic device, it is in the mechanical automation production process developed a kind of new type device, in the process of production plays a very important role. In industrial production and other domains, Because of the demands of the work, people were usually subjected to endanger of heat, decay and poisonous air etc factor, these factors increased the strength of worker's labor, even endanger life. Since the manipulator was born, the various difficult problems were easily solved. Robots can replace human consummately danger, repeat the boring work, ease human labor intensity and improve labor productivity, so robots have been applied more and more.
In this design the present condition of research about domestic and international manipulator and development trend of research concerning PLC were introduced. The principle of work and the process of action’s realization of manipulator control system were described. The design of manipulator model control system based on PLC was researched and Kingview’s application in the manipulator model control system was researched. The interface of supervision for the manipulator model control system was designed by Kingview. Anintuitive, clear and accurate manipulator operating state was provided. And then various possibilities for maintain and breakdown’s diagnosis were provided, the work’s efficiency of system was fully elevated.
KEY WORDS: PLC,manipulator,kingview

目 录
第一章 绪论 1
1.1 课题背景及研究意义 1
1.2 国内外现状 2
1.3 课题设计的目的 3
1.4 课题的主要内容 3
第二章 控制系统硬件选型 4
2.1 机械手介绍 4
2.1.1 机械手的分类 4
2.1.2 机械手的特点 5
2.1.3 机械手的构成 5
2.2 机械手控制方式的选择 6
2.3 PLC简介 6
2.3.1 PLC的基本结构 7
2.3.2 PLC的工作原理 8
2.3.3 PLC机型的选择 11
2.3.4 PLC的特点及应用领域 12
2.4 控制要求 13
2.5 系统硬件设计 14
2.5.1系统硬件设计 14
2.5.2 I∕O分配表 15
2.5.3 系统控制流程图 15
2.6 实物接线图 16
第三章 控制系统的程序设计 18
3.1梯形图程序设计 18
3.1.1 编程软件CX-P简介 18
3.1.2 梯形图程序的设计 19
3.2 模拟调试 22
第四章 组态王在机械手控制系统中的应用 24
4.1 组态王的概述 24
4.2 创建一个工程的一般过程 24
4.3 机械手控制系统组态的建立 25
4.3.1 定义新画面 25
4.3.2 定义I∕O设备 26
4.3.3 构造数据库 28
4.4 创建动画连接 29
4.4.1 指示灯的动画连接 29
4.4.2 机械手的动画连接 30
4.5 运行和调试 32
参考文献 35
致 谢 36
毕业设计小结 37

课题的主要内容
1. 正确选用机械手和PLC类型;
2. 编写I/O分配表;
3. 设计程序梯形图;
4. 设计组态监控画面;
5.模拟调试;

资料文件预览
共2文件夹,3个文件,文件总大小:3.09MB,压缩后大小:2.77MB
  • 毕业设计-PLC在机械手控制系统中的应用
    • 武旌
      • Microsoft Powerpoint演示文稿武旌PPT论文答辩稿.ppt  [842.00KB]
      • Microsoft Word文档武旌毕业论文.doc  [2.12MB]
      • Microsoft Word文档英文翻译-武旌.doc  [143.50KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部