您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计-灯套的工艺设计和加工仿真

免费下载毕业设计-灯套的工艺设计和加工仿真

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计制造及其自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+ppt
  • 文件大小:2.33MB
  • 上传时间:2014-6-30 1:00:41
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-灯套的工艺设计和加工仿真,共52页,15320字,附外文翻译、答辩PPT
摘要
薄壁零件是指由各种薄型板(壳)和加强筋条构成的轻量化结构零件,具有重量轻、强度高、造型美观等突出优点,工程应用日益广泛,航空航天产品普遍采用薄壁结构。由于其零部件具有轻量化的要求,故大量采用铝合金、钛合金等密度较低的材料。薄壁结构在制造过程中由于其相对刚度较低、加工工艺性差,在切削力、装夹力、切削振颤等因素作用下极易发生变形、失稳和振动等问题,制造难度极大。加工变形已成为航空制造技术中影响加工精度与质量的关键因素,严重地阻碍了航空制造业的发展。因此,对薄壁结构的切削加工变形的控制方法及其加工进行研究具有重大的理论意义和工程应用价值。
本文基于UG和工艺分析,通过建立集建模、工艺、加工于一体的数控加工链,解决变形、过切、切削参数不合理等实际加工中常遇到的问题,最终获得高效、高质量的数控加工程序,并通过实验对所得程序进行验证。主要研究工作和研究结论如下:
1.采用UG对零件进行再建模,结合所建模型的结构特点与实际加工经验,制定合理的加工工艺,选择合理的切削参数。
2.研究了零件的工艺制定方法。以普通零件为基础,结合航空薄壁类零件对本零件进行工艺分析,并完成本零件工艺的制定。
3.研究了基于UG的数控自动编程。根据工艺分析和模型结构特点,生成各个工序的刀位轨迹、获得刀位文件。阐述后置处理的算法原理及其需要的条件,并构建符合要求的后置处理器。对刀位文件进行后置处理,得到适合机床的G代码文件。
关健词:UG, 工艺, 数控编程, 薄壁类零件

ABSTRACT
Thin-walled parts is composed by various thin board (shell) and the tendons of strengthening as a lightweight structural parts.It has a advantage of light weight,high
strengthly and aesthetically.As well as that,the structure of thin-walled has a widespread application and it was commonly used by aerospace products.Because the structure has a request of lightweight parts,the large number of aluminum alloy and titanium alloy are commonly used as a low density of the material.Thin-walled structure have a lot of problems in the manufacturing process,such as deformation,buckling and vibration caused by cutting force,clamping force,because of its relatively low stiffness,poor processing technology.It is extremely difficult in the process of manufacturing.Deformation in machining had an important role in the aviation manufacturing technology,and it has seriously impeded the development of the aviation industry.Therefore,we are studying the way of reduced deformation in machining,which has a great value of theoretical and engineering applications.
This text according to UG and craft analysis, gather a model, craft and Be processed to through an establishment the number of integral whole controls to process a chain, solution transforms, lead slice, slice to pare parameter absurdity etc. physically process medium often meet of problem, finally acquisition efficiently, the number of high mass control to process procedure, and pass experiment to income the procedure carry on a verification.Main studying and research conclusion are as follows:
1.adoption the UG reconstruct a mold to the parts progress, combination the structure characteristics of model type with physically process experience, processing of establishment reasonable craft, choice reasonable of slicing and paring parameter.
2.studied the craft of parts to draw up a method.Take common parts as foundation, the combination aviation thin wall parts carries on craft analysis to this parts, and complete the establishment of this parts craft.
3.studied to control an automatic plait distance according to the UG number.According to craft analytical with pattern structure characteristics, the knife potential of each born work preface track, acquire a knife potential document.Elaborate to postpose the calculate way priniple of the disposal and the condition of its demand, and set up to meet to request of postpose processor.Postposing a disposal to the knife potential
document progress is suited the G coded document of the engine bed.
Keywords : UG, Craft, The number controls to weave a distance, Thin- walled parts

目录
摘要 I
ABSTRACT II
目录 IV
第一章 绪论 1
1.1 课题研究的背景和意义 1
1.2 课题研究的目的意义和主要内容 2
第二章 灯套的加工工艺分析与虚拟加工技术介绍 3
2.1 加工对象及工艺分析介绍 3
2.1.1 三维图形分析 3
2.1.2零件加工工艺方法分析 4
2.2 虚拟数控加工的基础技术 4
2.2.1数控加工编程技术 4
2.2.2数控加工仿真技术 5
2.2.3虚拟数控加工的主要流程 6
2.3 基于UG-CAM的刀位轨迹的生成 6
第三章 灯套工艺台的制定 7
3.1 建模软件介绍 7
3.2 制作工艺台 8
第四章 灯套的工艺设计 14
4.1 确定毛坯的制造形式 14
4.2 机床的选择 14
4.3 制定加工方案和加工工艺 14
4.4 选择切削用量 15
4.5 工序的安排原则 15
4.6 加工路线 16
4.7 定位基准的选择 17
4.8 制订灯套工艺路线 18
第五章 数控程序仿真加工 22
5.1 创建加工坐标系 22
5.2 创建加工程序 22
5.3 创建加工刀具 24
5.4 创建加工操作 25
5.5 创建加工几何体 27
5.6 具体操作过程 28
5.7 基于UG—POST的后置处理 38
第六章 总结 40
参考文献 41
致谢 42
毕业设计小结 43
附录 45

资料文件预览
共2文件夹,3个文件,文件总大小:2.83MB,压缩后大小:2.33MB
  • 毕业设计-灯套的工艺设计和加工仿真
    • 李王鹏
      • Microsoft Word文档李王文献翻译 .doc  [67.20KB]
      • Microsoft Word文档李王鹏毕业设计论文完成版 .doc  [2.42MB]
      • Microsoft Powerpoint演示文稿李王鹏论文答辩.ppt  [361.50KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部