安全检测:瑞星:安全 诺顿:安全 卡巴:安全
毕业设计-面向移动通信测试的AGPS协议与射频测试研究,共33页,8641字,附开题报告等
主要内容
第一章 概论(引言,本文测试内容)
第二章 AGPS概述
第三章 AGPS测试系统环境(总测试目标,测试计划,系统搭建)
第四章 控制平面的协议测试(目标,要求,用例设计,结果分析)
第五章 控制平面的射频测试(目标,要求,用例设计,结果分析)
第六章 AGPS的自动化测试(目标,要求,用例设计,结果分析)
第七章 结论与展望
摘要
随着3G技术的进一步发展和成熟, 现在电信和其他数据通信技术面临着一个融合突破的时代。3G的发展推动了全球实现无缝漫游,互连互通的需求,这样就使得3G设备在出厂前需要通过更加严格的测试。
为了检查不同生产厂家对通信设备协议的实现是否与标准一致,进而确保不同厂家的3G协议实现间能够相互操作,进行协议测试是一项非常必要的工作。本文对AGPS协议测试进行研究,设计并实现了一套针对AGPS协议测试的用例。在协议测试的基础上引入了针对A-GPS功能手机的射频性能的测试,有效完成了AGPS的射频测试,通过在测试过程中模拟不同场景,实现了对手机在不同场景下是否满足规定性能需求的验证,为3G手机性能测试评估提供了参考数据。
关键词:3G;AGPS;协议测试;射频测试
Abstract
With the further development and maturity of 3G technology, telecommunications and data communications technology faces a fusion breakthrough times.3G to promote the development of a global seamless roaming, interconnection requirements, so that makes 3G devices through more rigorous testing before leaving the factory.
Whether the implementation of the protocol in order to check the different manufacturers of communications equipment standards, thus ensuring the 3G protocol between the different manufacturers can interoperate, protocol testing is a very necessary work. In this paper, AGPS protocol testing research, design and implement a set for AGPS protocol test cases. Protocol testing based on the introduction of a test for the RF performance of the A-GPS feature phones, effectively completed the AGPS RF test and simulate different scenarios in the testing process, and in different settings on the phone meets the specified performance requirements. verification of 3G mobile performance testing and evaluation to provide reference data.
Key words: 3G;AGPS; protocol test; RF test
目录
第一章 绪论 - 1 -
1.1背景 - 1 -
1.2选题意义 - 1 -
1.3论文结构 - 1 -
第二章 AGPS技术 - 3 -
2.1 AGPS系统和GPS系统的区别 - 3 -
2.2 AGPS的定位流程 - 3 -
2.3 AGPS的实现方式 - 4 -
2.3.1 基于网络的控制平面 - 4 -
2.3.2 基于网络的用户平面 - 4 -
2.4 AGPS的定位计算方法 - 4 -
第三章 AGPS测试系统环境介绍 - 6 -
3.1 罗德与施瓦茨公司(R&S)简介 - 6 -
3.2 测试系统介绍 - 6 -
3.2.1 CRTU-W - 6 -
3.2.2 SMU200A - 7 -
第四章 控制平面的协议测试 - 8 -
4.1 协议测试简介 - 8 -
4.2 测试用例介绍 - 8 -
4.2.1 AGPS紧急电话测试 - 8 -
4.2.2 AGPS移动起源测试 - 9 -
4.2.3 AGPS移动终止测试 - 9 -
4.3 测试用例结果分析 - 10 -
4.3.1 测试结果为pass - 10 -
4.3.2 测试结果为fail - 11 -
第五章 控制平面的射频测试 - 15 -
5.1 射频测试简介 - 15 -
5.2 测试用例介绍 - 15 -
5.2.1 动态场景 - 15 -
5.2.2 多路径场景 - 16 -
5.2.3 移动场景 - 16 -
5.3 测试用例结果分析 - 17 -
5.3.1 测试结果为pass - 17 -
5.3.2 测试结果为fail - 18 -
第六章 AGPS协议与射频测试的执行 - 19 -
6.1 SMU200A系统设置 - 19 -
6.2 测试系统pics文件配置 - 20 -
6.3 执行测试 - 20 -
第七章 结论与建议 - 25 -
致谢 - 26 -
参考文献 - 27 -
论文结构
本文第二章对AGPS技术进行概述,主要从四个方面进行介绍:AGPS系统与GPS系统的区别,AGPS的定位流程,AGPS的实现方式以及AGPS的定位计算方法。第三章对AGPS测试系统进行了介绍,主要是两大测试系统:CRTU-W,SMU200A。图片与文字相结合介绍了测试系统的功能。第四五两章是本文的重点,AGPS的协议测试与射频测试的研究。第四章中首先简要概述了在WCDMA网络下的AGPS协议测试,其次对AGPS测试用例的设计情况进行介绍,最后是测试用例结果分析。第五章是AGPS射频测试研究,介绍了在不同场景下的测试用例,最后是测试用例结果分析。第六章是在测试系统上执行AGPS测试用例时的实践操作说明。最后第七章是结论与展望。