您现在正在浏览:首页 > 论文 > 机械机电 > 毕业论文-杂草切割阻力试验

免费下载毕业论文-杂草切割阻力试验

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计制造及其自动化
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word
  • 文件大小:2.44MB
  • 上传时间:2012-7-4 23:07:07
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
毕业论文-杂草切割阻力试验,共27页,13303字
摘要:水切割技术化水为刀,通过加压水泵的作用使水从一个极细的喷嘴喷出,形成高速水射流。本论文论述了水切割技术的应用研究及发展,并提出了水力切割除草的新概念,与传统方法比较得出水切割技术除草具有无污染,清洁卫生,粉尘少,刀具无磨损,噪音小等优点,具有广泛的应用前景。为开发水力除草,通过切割实验确定杂草切割阻力及切割因素(植物直径、含水率、电机转速、削切角)对切割阻力的影响。以蒿草、狗尾草和牛筋草为实验对象分别测定其茎杆切割阻力、分析其影响因素。实验结果表明,杂草切割阻力与电机转速对数成反比,与杂草直径平方成正比,与削切角平方成反比;不同杂草含水率对切割阻力影响不同,成一定的函数关系。同种杂草,直径、含水率、削切角和电机转速依次影响切割阻力。为水力除草设备设计提供了一定的理论依据。
关键词:切割阻力 含水率 直径 转速 削切角
Abstract: Water cutting technology for water knife, through the pressure of the water pump role from a very fine nozzle jet, form the water jet. Reviewed the application of the water cutting technology research and development; And put forward the hydraulic cutting weeding new concept, and traditional method is concluded water cutting technology weeding non-pollution clean sanitation, little dust, cutting tools, low noise, no wear etc, and has a broad prospect of application. To the development of the water jet, a cutting test was conducted to determine the force and the influence such as the diameter, the moisture content, the rate of motor and the angle of the cutting which affected the force. The objects of the test are Humilis, Setaria and Goosegrass. The result suggests that the force was inversely proportional to the index of the rate of the cutting ,was proportional to the square of the diameter and the square of the angle of cutting. Different kinds of weeds have different relationships between the force and the moisture content. The diameter, the moisture content, the angle of the cutting and the rate of cutting affects the force followed by for the same kind of weeds. Those provides the basis of the design for equipments of water jet.
Key words: force; moisture content; diameter; the rate of cutting; the angle of the cutting
目 录
摘要1
关键词…………1
1 前言…………2
1.1 水力切割的国内外研究现状……2
1.2 水力除草的研究意义5
2 试验台的设计8
2.1 试验台构成及工作原理…………8
2.2 试验材料与方法……9
2.3 试验结果与分析……10
2.3.1 杂草直径对切割阻力的影响10
2.3.2 植物含水率对切割阻力的影响…………13
2.3.3 电机转速对切割阻力的影响16
2.3.4 削切角对切割阻力的影响…18
2.3.5 多因素综合影响试验………20
3 结论…………21
参考文献………22
致谢23
资料文件预览
共1文件夹,6个文件,文件总大小:2.79MB,压缩后大小:2.44MB
  • 毕业论文-杂草切割阻力试验
    • Microsoft Word文档毕业论文更题申请表.doc  [32.50KB]
    • Microsoft Word文档答辩记录表.doc  [30.00KB]
    • Microsoft Word文档开题论证记录.doc  [32.00KB]
    • Microsoft Word文档审批表.doc  [47.50KB]
    • Microsoft Word文档杂草切割阻力试验.doc  [2.62MB]
    • Microsoft Word文档中期检查表.doc  [33.00KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
论文相关下载
  1. 课程设计-超高压水切割
返回顶部