您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计-端盖注射模设计

免费下载毕业设计-端盖注射模设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计
  • 适用年级:大学
  • 上传用户:xuehai
  • 文件格式:word+autocad
  • 文件大小:1.40MB
  • 上传时间:2012-5-19 23:42:12
  • 下载次数:0
  • 浏览次数:0

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
毕业设计-端盖注射模设计,共40页,17454字,附设计图纸、任务书、文献综述等
摘要:首先对所要设计的产品进行工艺的分析与计算,该塑件采用由丙烯、丁二烯、苯乙烯三种单体共聚而成的ABS为材料,然后在分析计算的基础上确定成型工艺方案,为一模一腔,推杆推出,点浇口,单分型面,浇口套内的主流道采用圆锥形,选用的模架为标准模架,导柱导套的安装用Z1的安装方式,再在此基础上进入模具总装配图的结构设计以及尺寸的确定。在此基础上对注塑模具的主要零部件尤其是成型零部件的尺寸进行设计与计算,期间要参考塑料成型相关的资料和翻阅各种塑料模具设计手册,并通过计算以确定模具的具体结构及尺寸以及成型零件的相关尺寸,通过不断的计算与修改,并在指导老师的悉心关怀和耐心指导下进行不间断的反复修改,最终独立完成这次毕业设计。在设计的过程中,主要成型零件采用镶拼结构,利于加工。另外,本次毕业设计是对我大学所学各种知识的综合检验和考查,通过这次毕业设计使我了解和掌握了许多更深层的知识,并且整个过程都是自己独立完成的,提升了自己的能力,在整个设计过程中,详细介绍了塑件材料的基本特性和成型特点,模具的结构组成、结构特点、工作原理、设计原理、注塑机相关参数、模具材料和热处理要求等。其中对浇注系统、成型零部件、结构零部件、推出机构、冷却系统、排气系统作了重点阐述。
关键字:注塑模;浇注系统;侧浇
Design of Cover Injection Mould
Student: Chen Ai
Tutor: Chen Li-Hang
(Oriental Science &Technology College of Hunan Agricultural University, Changsha 410128)
Abstract: First to design of the product process analysis and calculation, the plastics used by the propylene, butadiene styrene three monomers copolymerization and become ABS for material, then on the basis of the analysis and calculation to determine molding process solutions for exactly a cavity, push rod launch, point runner, single parting surface, runner set inside the mainstream way adopts cone, selection of formwork for standard formwork, guide pin guide with the installation of Z1 installation way, and on the basis of this total into the mold of assembly structure design and size determination. On the basis of the main parts especially injection mold size discusses h0 during the design and calculation, the plastic molding related to reference through all kinds of plastic material and mould design manual, and through the calculation to determine the specific structure and size mold and molding parts related size, through continuous calculation and modification, and in guiding teacher of meticulous care and patience under guidance of uninterrupted repeated revision, eventually independent completed the graduation design. In the design process, the main forming parts adopt insert or structure, beneficial to the processing.
In addition, the graduation design is learned in my university of knowledge comprehensive inspection and examination, pass the graduation design makes me understand and master the many deeper knowledge, and the whole process is done independently, promoted oneself ability, in the whole design process, introduces the basic characteristics of molded parts material and forming characteristics, die structure composition, structure characteristics, working principle, design principle, the injection molding machine relevant parameters, mould material and heat treatment requirements, etc. Among the gating system, molding parts, structure parts, launch institutions and exhaust system, cooling system, and presented.
Key word: injection mould; gating system; side gate
目 录
摘要 1
关键字 1
1 前言 2
2 塑件工艺分析 3
2.1 塑件原材料的分析 4
2.2 塑件结构和尺寸精度、表面质量分析 5
2.3 塑件注射工艺参数的确定 5
2.4 计算塑件的体积和质量 5
3 成型方案及模具类型 6
3.1 确定模具类型 6
3.2 确定模具类型的主要结构 8
3.2.1 分型面的选择 8
3.2.2 型腔的排列方式的确定 9
3.2.3 浇注系统的设计 10
3.2.4 排气系统的设计 16
4 脱模机构设计 16
5 推出机构的设计 17
6. 冷却系统的设计 19
7. 成型零件的设计 22
7.1 成型零件的结构设计 22
7.2 成型零件的工作尺寸计算 23
7.2.1 影响塑件尺寸精度的因素 23
7.2.2 成型零部件工作尺寸计算 24
8 抽芯机构的设计 26
8.1 侧向分型与抽芯方式 26
8.2 侧向分型与侧抽芯机构的类型的选用 26
8.2.1 斜导柱侧抽芯机构的工作原理 26
8.2.2 斜导柱侧抽芯机构的组成形式 27
8.3 斜导柱的侧抽芯机构设计 28
8.3.1 斜导柱的设计 28
8.3.2 滑块的设计 29
8.3.3 楔紧块的设计 30
8.4 斜顶的设计 31
9 塑料模材料及选用 31
9.1 模具成型零件对材料的要求 31
9.2 塑料模材料 32
10 注塑模在注射机上调试及试模 35
10.1 注射机有关参数的校核 35
11 结论 35
参考文献 36
致谢 37
资料文件预览
共2文件夹,11个文件,文件总大小:1.85MB,压缩后大小:1.40MB
  • 毕业设计-端盖注射模设计
    • 26-端盖注射模设计
      • Microsoft Word文档毕业论文(设计)成绩评定册.doc  [32.31KB]
      • Office 2007以上版本的Microsoft Word文档陈爱.docx  [634.05KB]
      • Office 2007以上版本的Microsoft Word文档陈爱的封面.docx  [11.85KB]
      • Microsoft Word文档陈爱的目录.doc  [49.00KB]
      • Office 2007以上版本的Microsoft Word文档工作记录表.docx  [12.43KB]
      • Microsoft Word文档开题论证审批表.doc  [49.24KB]
      • Microsoft Word文档任务书.doc  [69.00KB]
      • Microsoft Word文档选题审批表.doc  [32.05KB]
      • Microsoft Word文档指导检查工作情况登记表.doc  [13.67KB]
      • Microsoft Word文档中期检查表.doc  [31.59KB]
      • AutoCAD工程图纸文件总装图.dwg  [960.00KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部