您现在正在浏览:首页 > 论文 > 汽车交通 > 毕业设计-赛马轿车智能电动后视镜开关及控制线路优化设计

免费下载毕业设计-赛马轿车智能电动后视镜开关及控制线路优化设计

  • 资源类别:论文
  • 资源分类:汽车交通
  • 适用专业:机械设计
  • 适用年级:大学
  • 上传用户:cansan380
  • 文件格式:word+autocad
  • 文件大小:1.46MB
  • 上传时间:2012-3-18 12:38:09
  • 下载次数:1
  • 浏览次数:13

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介

毕业设计-赛马轿车智能电动后视镜开关及控制线路优化设计,共41页,15657字,附设计图纸及程序
摘 要
汽车后视镜反映汽车后方、侧方和下方的情况,使驾驶者可以间接看清楚这些位置的情况,扩大了驾驶者的视野范围。汽车后视镜的控制应简单可靠,并且可以依据驾驶员的要求随时进行调节。
此次设计针对机械触点式电动后视镜开关存在缺点,依据赛马轿车电动后视镜的结构进行必要的技术改进。分析其触点烧蚀的原因,进行电路设计,实现对电动后视镜的控制。结合单片机的发展及其在汽车上的应用,提出利用单片机控制电动后视镜转动的设计方案。取消机械触点,并对控制电路进行优化设计以及部分改装,使控制线路简化,从而在保证实现电动后视镜控制,同时减少了原车电路复杂的控制线束。在不破坏原车结构的同时,便于拆卸与安装,使用控制简单可靠。具有很好的互换性。
关键词:电动后视镜;单片机;控制电路;直流电动机;优化设计
ABSTRACT
Motor vehicle rear-view mirror to reflect the rear, side and the bottom of the situation, so that drivers can see clearly the location of the indirect, expanded the scope of the vision of motorist. The rear-view mirror control of the car should be simple and reliable, and the driver can be based on the request at any time to regulate by the driver.
The contact is designed according to the shortcomings of the mechanical-electrical switch mirrors, based on the structure of the the race car’s rear-view mirrors and complete necessary technical improvements. Analysis of the reason for the erosion of their contacts and take the designation of the circuit, so that finish the implementation of the manipulation of electric rearview mirror. Then joined the development of SCM and consider its application in the automobile, and proclaim the designation by using SCM to control rotating electric mirror. However this design canceled the mechanical contact and optimize the control circuit design and make some new modifications, in order to simplify the control lines. In order to ensure that the realizations of electrical control of the rear-view mirror of the original car at the same time it can reduce the complexity of the control circuit wiring harness. While the car does not destroy the original structure. For demolition and installation, the use of simple and reliable control.And it has a wonderful interchangeability.
Key words: Electric Rear-view Mirrors; Single-Chip Microcomputer;Control Circuits;Delect Current Motor;The Optimization Design
目 录
摘要 I
Abstract II
第1章 绪论 1
1.1 引言 1
1.2 研究的目的和意义 1
1.3 电动后视镜控制发展趋势 1
1.4 设计的流程 1
1.5 设计的主要内容 2
第2章 赛马轿车电动后视镜及工作原理 4
2.1 电动后视镜结构 4
2.2 后视镜功能介绍及其种类 4
2.3 后视镜发展趋势 6
2.4 赛马轿车电动后视镜 7
2.4.1 赛马轿车电动后视镜结构及工作原理 7
2.4.2 赛马轿车电动后视镜控制线路及工作原理 7
2.5 赛马轿车电动后视镜开关特点 9
2.6 后视镜折叠及加热除雾功能 9
2.7 本章小结 10
第3章 线路优化及开关设计 11
3.1 设计原则 11
3.2 控制线路优化方案 11
3.2.1 触点烧蚀原因的分析 11
3.2.2 控制线路优化设计方案一 12
3.2.3 控制线路优化设计方案二 12
3.2.4 控制线路优化设计方案三 14
3.3 方案分析选择 15
3.4 优化后的控制电路及其工作原理 15
3.5 控制电路元件选择及参数确定 16
3.5.1 电路组成 16
3.5.2 元件选择参数确定 16
3.6 试验分析 17
3.7 本章小结 17
第4章 赛马轿车后视镜控制程序编制 19
4.1 单片机介绍 19
4.2 单片机选择 20
4.3 控制程序流程图的编写 20
4.4 本章小结 21
第5章 赛马轿车后视镜开关设计 22
5.1 设计原则 22
5.2 安装位置确定 22
5.3 原车控制开关实际尺寸测量 24
5.4 外观及按键设计 25
5.4.1 开关外型设计 25
5.4.2 按键设计 27
5.4.3 外观确定 27
5.5 本章小结 27
结论 28
参考文献 29
致谢 30
附录 31

资料文件预览
共1文件夹,3个文件,文件总大小:1.69MB,压缩后大小:1.46MB
  • 毕业设计-赛马轿车智能电动后视镜开关及控制线路优化设计
    • Microsoft Word文档设计说明书.doc  [1.33MB]
    • 备份文件闫涵-图纸.bak  [183.84KB]
    • AutoCAD工程图纸文件闫涵-图纸.dwg  [183.84KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部