学海网

中文题目：二次调节扭矩伺服加载实验台设计，毕业设计（论文）共65页，23697字（其中：外文文献及译文17页） 图纸共3张，附实习报告及开题报告
外文题目：THE DESIGN FOR THE TORQUE SERVO LOADING TEST-BED WITH SECONDARY REGULATION
摘要
随着汽车行业的不断发展壮大，对各种汽车车辆的工作性能和可靠性等的要求也越来越高，尤其是在特殊路况和工作条件下运行的越野，大型重载等特种车辆，这方面的要求就更高。对这种车辆来说，其总体工作性能和可靠性主要取决于它的发动机和轮桥，发动机为成型产品，其工作性能和可靠性等指标均已通过严格检测，设计车辆时按要求选择即可，而轮桥是另行设计的，因此为了提高车辆的工作性能和可靠性，应将重点放在轮桥上。对于新设计制造的特种车辆轮桥，需要利用专门的高动态性能固定试验台对其进行模拟加载试验，检测各项工作性能和可靠性指标是否满足要求。轮桥加载试验台，由恒压油源及管路系统、模拟加载系统、控制系统、机械台架四部分组成。恒压油源为整个模拟加载单元提供恒定压力，同各种液压元件及管路一起构成恒压网络。
关键词：二次调节;二次原件;驱动变速箱
Abstract
Unceasing grows strong along with the automobile profession, and reliable and so on request is also getting higher and higher to each kind of automobile vehicles' operating performance, particularly cross country which moves under the special state of roads and the working condition, the large-scale heavy load and so on special purpose vehicle, this aspect's request is higher. To this kind of vehicles, its overall operating performance and the reliability is mainly decided by its engine and the round the bridge, the engine to take shape the product, its targets and so on operating performance and reliability already through the strict examination, designs when the vehicles according to the request choice then, but turns the bridge is the separate design, therefore to enhance vehicles' operating performance and the reliability, should place with emphasis on a round bridge. Regarding the new design manufacture's special purpose vehicle round the bridge, needs to use the special high dynamic property fixed test platform to carry on the analog loading experiment to it, examines each operating performance and the reliable target whether to satisfy requests. Turns the bridge to load the test platform, by the constant pressure oil source and the circuitry, the analog loading system, the control system, the mechanical gantry four parts is composed. The constant pressure oil source provides the constant pressure for entire analog loading unit, constitutes the constant pressure network together with each kind of hydraulic element and the pipeline.
Key word: Two adjustments; two original parts; actuate the gear box
目录
前言 1
1 绪论 2
1.1 国内外二次调节技术研究发展概况 2
1.2 车辆轮桥加载系统概述 3
1.2.1 开放式加载系统 4
1.2.2 封闭式加载系统 4
1.3 二次调节加载系统原理与特点 6
1.3.1 原理 6
1.3.2 特点 7
2 总体的结构设计 8
2.1 试验台各部分组成及其功用 8
2.2 模拟加载系统原理 8
3 驱动变速箱的设计 11
3.1 传动方案的确定 11
3.2 最大转矩的计算 12
3.3 齿轮的设计 13
3.3.1 选择齿轮材料 13
3.3.2 确定齿轮传动精度等级 14
3.4 轴的设计 20
3.4.1Ⅰ轴的设计 21
3.4.2 Ⅱ轴的设计 23
3.4.3 Ⅲ轴的设计 24
3.4.4 Ⅳ轴的设计 24
3.4.5 Ⅴ轴的设计 26
4 零件的强度校核 28
4.1 轴的强度校核 28
4.1.1 Ⅰ轴的校核 28
4.1.2 Ⅱ轴的校核 30
4.1.3 Ⅲ轴的校核 34
4.1.4 Ⅳ轴的校核 36
4.1.5 Ⅴ轴的校核 40
4.2 轴承的校核 43
4.3 键的校核 44
4.3.1 平键的校核 44
4.3.2 花键的校核 46
5 结论 47
致谢 48
参考文献 49
附录A 译文 50
附录B 外文文献 58