您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计- 沥青再生设备恒温控制系统设计

免费下载毕业设计- 沥青再生设备恒温控制系统设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计制造及自动化
  • 适用年级:大学
  • 上传用户:xuehi
  • 文件格式:word+AutoCad
  • 文件大小:232.63KB
  • 上传时间:2011-3-18 23:34:16
  • 下载次数:2
  • 浏览次数:73

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
一、设计题目:沥青再生设备恒温控制系统设计,共30页,14431字,附设计图纸
二、设计任务要求及主要原始资料:
设计任务:
1.撰写论文。
2.设计加热装置及控制系统
3.设计控制软件
原始资料:
关于沥青再生设备的有关论文,传热学和热力学方面的书籍,机械设计方面的论文及手册。
目 录
摘要 …………………(1)
关键词 ………………(1)
Abstract ……………(2)
Keywords ……………(2)
第一章 综述
一、概述………………(3)
二、再生设备特点及构造………………(7)
三、S7-200的组成原理 …………………… (8)
四、国外沥青再生设备的状况 ……………(8)
第二章 总体设计
一、引言……………(11)
二、主要参数确定…(12)
三、恒温控制原理 (20)
四、程序设计 (21)
五、结束语…………(25)
后记 ………………(27)
参考文献…………(29)
附录 ………………(30)
摘要:我国沥青资源极为匮乏,旧沥青混合料不利用是一种极大的浪费;并且旧沥青料会造成环境污染。这就需要一种沥青再生设备来重新利用这些旧沥青。国外,这项技术早在1915年就早就开始了,而且公路(尤其是高速公路)和机场的建设近10多年来取得了很大的成绩,目前已进入大、中修期。期间,翻修路面产生的旧沥青混合料如果没有再生利用,旧沥青的废弃值将达到每年200万吨之巨。本文分析了沥青再生产的必要性,重点对干燥滚筒的内部量的分析。对沥青井和机拱干筒的传热方式,各传热方式的传热量计算及影响传热量和传热效率的有关因素进行了深入的分析, 结合实际设计课题开发了拱干筒热计算并用西门子的单片机S7-200进行有效的控制。
关键词:沥青 再生设备 烘干筒,热效率
Abstract: Our country has obtained many great achievements in highway (especially in the expressway),and airport construction in the recent decades. Now these constructions have come into the period in which they need large and middle plant. During the period of the road construction, if the used asphalt concrete weren’t recycled, it would make a great waste, almost reach as much as 200 million ton every year. In the mean time, this asphalt will cause the pollution to the environment so a kind of machine is needed to recycle the used asphalt. In other countries this kind of technique has been used since 1915.But in our country the use of this kind of machine just begin. In this paper the author discusses the classification, use, theory and processing of this recycling machine. After comparisons, the author put up the new method of designing the dry roller by using of the heat transfer theory and thermodynamics. Mainly: the shape size of the dry roller, the parameter of the burner and the parameter of the breeze machine. the cavitation erosion resistance of bead welding layer of several kinds of nickle一base alloy in common use was investigated by using a vibratory cavitation aPParatus,and was comPared with that of austenitic stainless steel and low一carbon steel.The results showed that the cavition erosion resistance of the alloy was low for the alloy having a very low hardness,and the resistance increased with the increasing of the alloy‘5 hard-
Ness.we also use PLC S7-200 for us.
Key words: Asphalt Recycling equipment cavitation erosion,bead welding
资料文件预览
共2文件夹,9个文件,文件总大小:1.41MB,压缩后大小:232.63KB
  • 毕业设计- 沥青再生设备恒温控制系统设计
    • 图纸
      • 可进行互交换的绘图文件格式1.dxf  [233.51KB]
      • 可进行互交换的绘图文件格式2.dxf  [158.35KB]
      • 可进行互交换的绘图文件格式3.dxf  [134.98KB]
      • 可进行互交换的绘图文件格式G.3.dxf  [84.55KB]
      • 可进行互交换的绘图文件格式G.4.dxf  [81.52KB]
      • 可进行互交换的绘图文件格式G.5.dxf  [178.66KB]
    • Microsoft Word文档目录.doc  [19.00KB]
    • Microsoft Word文档论文.doc  [529.50KB]
    • Microsoft Word文档设计任务书.doc  [19.00KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
论文相关下载
返回顶部