您现在正在浏览:首页 > 论文 > 机械机电 > 毕业设计-组合镗动力头设计

免费下载毕业设计-组合镗动力头设计

  • 资源类别:论文
  • 资源分类:机械机电
  • 适用专业:机械设计制造及自动化
  • 适用年级:大学
  • 上传用户:xuehi
  • 文件格式:word+AutoCad
  • 文件大小:905.86KB
  • 上传时间:2011-3-18 23:18:54
  • 下载次数:4
  • 浏览次数:72

安全检测:瑞星:安全 诺顿:安全 卡巴:安全

资料简介
一、设计题目:组合镗动力头设计,共27页,7790字,附设计图纸
二、设计任务要求及主要原始资料
(1) 设计任务要求:
主要完成加工传动轴箱体动力头的设计和液压缸的设计.
(2) 主要原始资料:
中国第一拖拉机厂的传动轴箱体的零件图.
目 录
摘要……………………………………2
第一章 前言……………………………3
第二章 计算部分………………………5
一. 刀具校核…………………………5
二. 齿轮校核……………………………8
三. 轴的校核…………………………12
四. 键的选择与校核…………………………17
五. 液压缸的设计与校核……………………18
第三章 结论………………………22
第四章 后记………………………23
第五章 参考文献………………24
组合镗动力头设计
摘 要
在大批量生产中经常用到组合镗床,本次设计的组合镗床动力头,就是实现快速加工的好方法.它是利用床身后的液压缸推动床身到达工件旁.然后另一液压缸推动旋转主轴镗孔,同时主轴上的齿条带动齿轮转动,和其同轴的另一齿轮带动滑板上的齿条径向进给,车端面.
机床的主要特征是:工件在加工过程中保持静止,所有造型运动都施加到刀具上.通过旋转刀具来实现镗削,刀具安装在接到主轴上的镗杆上,然后沿旋转轴线进给主轴,镗杆和刀具.端面车削工序可以通过使用专用刀具架在其旋转时径向进给刀具来实现.
与一般的动力头相比此动力头的优点是:(1).一次走刀可以加工多个加工面,不但节约时间,而且保证零件的加工精度.(2).自动化程度高,工人的劳动强度低.(3).制造与安装简单,所需的夹具复杂程度低.
关键词: 径向进给 轴向进给 一次走刀 同时 主轴 齿轮与齿条
Combination boring power unit design
Abstract
Usually use the combination-boring machine in quantity production, the combination boring machine power unit of this design, is a good method that realizes fly-process. It is the hydro-cylinder to make use of the after body section push the body section arrive the work a beside. Then another hydro-cylinder pushes to revolve the main spindle borehole, the rack on the main spindle arouses the gear running at the same time, sum its coaxial another gear arouses rack on the slide plate a radial feed, turning end surface.
The principal feature of the machine is that the workplace remains stationary during machining, and all the generating motions are applied to the tool. Boring is achieved by rotating the tool, which is mounted on a boring bar connected to the spindle, and then feeding the spindle, boring bar, and tool along the axis of rotation. A facing operation can be carried out by using a special tool holder that feeds the tool radically as it rotates.
Comparing with the ordinary power unit the advantage of this power unit is: (1) One pass can process machined surface more, not only economize time, but also guaranteeing the parts machining accuracy. (2). The automation degree is high, the worker's labor strength is low. (3). Production and installation simple, a fixture for needing grip the degree is low.
Key Words: Radial feed. Axial feed. One pass. Simultaneously. Main spindle. Rack-and-pinion.
资料文件预览
共1文件夹,16个文件,文件总大小:2.88MB,压缩后大小:905.86KB
  • 毕业设计-组合镗动力头设计
    • AutoCAD工程图纸文件GLJT.dwg  [99.14KB]
    • AutoCAD工程图纸文件Gljt1.dwg  [194.24KB]
    • AutoCAD工程图纸文件Gljt2.dwg  [38.91KB]
    • AutoCAD工程图纸文件Ljt1.dwg  [285.90KB]
    • AutoCAD工程图纸文件Ljt2.dwg  [240.50KB]
    • AutoCAD工程图纸文件Ljt3.dwg  [50.74KB]
    • AutoCAD工程图纸文件Ljt4.dwg  [37.98KB]
    • AutoCAD工程图纸文件Ljt5.dwg  [40.63KB]
    • Microsoft Word文档任务书.doc  [19.50KB]
    • AutoCAD工程图纸文件动力头.dwg  [1.11MB]
    • Microsoft Word文档封面.doc  [19.00KB]
    • AutoCAD工程图纸文件应力图.dwg  [31.89KB]
    • AutoCAD工程图纸文件板轴零件图.dwg  [95.11KB]
    • AutoCAD工程图纸文件液压缸.dwg  [94.89KB]
    • Microsoft Word文档翻译.doc  [49.50KB]
    • Microsoft Word文档论文.doc  [513.50KB]
下载地址
资料评论
注意事项
下载FAQ:
Q: 为什么我下载的文件打不开?
A: 本站所有资源如无特殊说明,解压密码都是www.xuehai.net,如果无法解压,请下载最新的WinRAR软件。
Q: 我的学海币不多了,如何获取学海币?
A: 上传优质资源可以获取学海币,详细见学海币规则
Q: 为什么我下载不了,但学海币却被扣了?
A: 由于下载人数众多,下载服务器做了并发的限制。请稍后再试,48小时内多次下载不会重复扣学海币。
下载本文件意味着您已经同意遵守以下协议
1. 文件的所有权益归上传用户所有。
2. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
3. 学海网仅提供交流平台,并不能对任何下载内容负责。
4. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
5. 本站不保证提供的下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
返回顶部